1 / 14

Registrations

Registrations. Emissions. Total aggregate emissions before control device are at least 0.2 lbs/day but less than 10 lbs/day. (Maximum daily emissions) Sources are exempt if emissions are <0.2 lbs/day or equipment is listed in Appendix A, Reg. 1102.

Download Presentation

Registrations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Registrations

  2. Emissions • Total aggregate emissions before control device are at least 0.2 lbs/day but less than 10 lbs/day. (Maximum daily emissions) • Sources are exempt if emissions are <0.2 lbs/day or equipment is listed in Appendix A, Reg. 1102. • Permits are required for emissions of 10 lbs/day or greater.

  3. Control Device • A permit is required if the control device is needed to meet federal and/or state emission limitations or standards.

  4. Reg. 1125 • A permit is required if equipment is a major modification to a major source as defined by Reg. 1125, “Requirements for Preconstruction Review.”

  5. Air Quality Impact • EPA Screen3 Air Dispersion Model calculates maximum downwind concentration (MDC) based on one-hour exposure. • The MDC is adjusted to an eight-hour basis and compared to the eight-hour Threshold Limit Value (TLV) as found in NIOSH or ACGIH tables • The Department has set a criteria that the TLV must be at least 100 times greater than the MDC

  6. TLV/MDC <100 • The Department will determine if the equipment can be registered. • Concentrations are compared to Ambient Air Quality Standards. • Configuration of emission source may be changed.

  7. TLV/MDC >/= 100 • Submit registration form and TLV/MDC spreadsheet to Department. • Equipment can be installed and operated without further approval.

  8. Department Assisted Registration • Complete Parts 1-4 and 6-7 of registration form. • Department will perform Screen3 modeling.

  9. Self-Registration • Start with Registration Form

  10. Run Screen3 • One-hour MDC for each pollutant. • Distance to MDC.

  11. TLV/MDC Spreadsheet • Adjusted MDC (eight-hour) • TLV/MDC (eight-hour basis)

  12. Submittals • Registration Form • TLV/MDC Spreadsheet • MSDS and supporting documentation

  13. Instructions, Reg. Form, & TLV/MDC • http://www.awm.delaware.gov/AQM/Pages/AirContaminantEquipmentRegistration.aspx

  14. DOS Version of SCREEN3 • http://www.epa.gov/scram001/dispersion_screening.htm#screen3 • http://www.epa.gov/scram001/userg/screen/ screen3d.pdf

More Related