1 / 3

Set up a Netgear EX6100 extender_

<br>Hello, Iu2019m Jenny Ruth. Content writer is what I do. Iu2019m currently employed by a marketing agency where I offer assistance with smart devices like Netgear genie smart setup EX6100.

jennyruth1819
Download Presentation

Set up a Netgear EX6100 extender_

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. There are only two ways to set up a Netgear EX6100 extender: Netgear genie smart setup EX6100 can be done with these two ways: Setup manually (Web Browser Setup). WPS Configuration.

  2. The steps for Netgear EX6100 Extender Setup by WPS Button are as follows: • Unwrap the Netgear EX6100, then turn it on. • Position your AC750 close to the router. • A full green colour will appear on the power LED. • The WPS button on your repeater needs to be depressed. • After a brief delay, press the WPS button on the router. • Your extender has been configured properly if all of the LEDs on the extender turn completely green. • Connect your smart devices to the booster and move it to an area with dead spots. • Using this technique, we can quickly configure the Netgear EX6100 AC750.

  3. Setup of the Netgear EX6100 Extender Manually Follow these steps to manually configure the Netgear EX6100: • Using an Ethernet cable, join the EX6100 to your modem. • Turn on the EX6100 by connecting it to a power source. • Using an Ethernet cable, join the EX6100 to a computer or other gadget. • Open a browser and type the EX6100's IP address into the address bar. The IP address is "192.168.1.250" by default. • I present the EX6100. "Admin" and "password" are the default username and password, respectively. • Set the EX6100's options as desired.

More Related