1 / 18

IE 405 QUALITY MANAGEMENT

IE 405 QUALITY MANAGEMENT. RECITATION 6. Rec 6 Q1. The highest contributors of defects is excess flash, missing cap and flow lines. Excess flash also has the highest defect rate in the individual c chart.

jack
Download Presentation

IE 405 QUALITY MANAGEMENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IE 405QUALITY MANAGEMENT RECITATION 6

  2. Rec 6 Q1

  3. The highest contributors of defects is excess flash, missing cap and flow lines. Excess flash also has the highest defect rate in the individual c chart. • Excess flash can be reduced by maintaining the machinery or equipment, in order to reduce the flash rate. • An important parameter missing cap, can be avoided by warning the worker(s) who are responsible for putting on the cap. It is simpler and easier to maintain the caps on the bottles than is to reduce the other defects.

  4. Rec 6 Q2 • USL=12.55mm • LSL=12.45mm • Derive Z value from • 12.45-12.50/0.02= -2.50 • a) Scrap rate of 0.0062 or 0.62% • Rework rate (due to symmetry) is 0.62% also.

  5. b) Area= The value is with respect to LSL not USL.Because the z=-3.59 value is calculated with respect to scrap not rework. • -3.59= 12.45- m/0.02 • m=12.52mm c) Rework 12.55-12.52/0.02= 1.50 1- 0.9332= 6.68%

  6. Rec6 Q3

  7. Q3 X Chart

  8. R chart

  9. Rec 6 Q3 • Cp measures POTENTIAL CAPABILITY • Why? • Does not take into account where the process mean is located relative to the specifications • Cpk measures ACTUAL CAPABILITY • It takes process centering into account

  10. Specifications: • LSL:-50 • USL: 50 with respect to formula • From chart derive Rbar/d2= 3.035 Cp=100/3.02*6= 5.50 • 1/5.50 = 0.1818 Covers 18% of the specification band.

  11. Cpk= min(Cpu, Cpl) • Cpu= (50-10.375/3*3.03)=4.359 • Cpl= (10.375- (-50)/3*3.03)=6.64 • Min (4.359, 6.64)= Cpk • Choose 4.359 • Since Cp>Cpk process is out of center

More Related