1 / 24

Spectrometer compensation in IR2 and IR8 during the 450 GeV collision run

LOC meeting. Spectrometer compensation in IR2 and IR8 during the 450 GeV collision run. Y. Papaphilippou Thanks to S. Fartoukh, W. Herr, B. Jeanneret, M. Giovannozzi. September 11, 2006. Outline.

ivie
Download Presentation

Spectrometer compensation in IR2 and IR8 during the 450 GeV collision run

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LOC meeting Spectrometer compensation in IR2 and IR8 during the 450 GeV collision run Y. Papaphilippou Thanks to S. Fartoukh, W. Herr, B. Jeanneret, M. Giovannozzi September 11, 2006

  2. Outline • Can the spectrometer magnets of IR2 and IR8 have their maximum (corresponding to 7TeV) field during the 450 GeV collisions run? (LTC action) • IR2/8 nominal injection optics and crossing schemes • IR2/8 spectrometer magnets and internal crossing angles • Nominal aperture with different configurations • With/without external crossing • With + or – spectrometer polarities • Available aperture when spectrometer ramped to its max value at 450 GeV. • Analytical estimates and MADX simulations LOC meeting, Y. Papaphilippou

  3. LHC experimental IRs • Two high luminosity experiments • ATLASin IP1 (vertical crossing) • CMS in IP5 (horizontal crossing) • B-physics with lower luminosity in asymmetric IP8 • LHCb (horizontal crossing) • Injection of beam 2 • Heavy ion experiment (and p-p collisions with offset beams) • ALICE (vertical crossing) • Injection of beam 1 LOC meeting, Y. Papaphilippou

  4. Beam 1 Beam 2 IR2 Injection optics (O. Brüning et al. LHC Project rep 367) Beam 1 Beam 2 • β*=10m, vertical crossing angle of ±150μrad and horizontal parallel separation of ± 2mm • External angle of ±80μrad for reducing the long range beam-beam effect • Internal angle of ±70μrad for compensating spectrometer orbit distortion • Horizontal separation positive for Beam 1 and negative for Beam 2 • Angle sign can be chosen arbitrarily (following spectrometer polarity) LOC meeting, Y. Papaphilippou

  5. ALICE dipole magnet and its compensators • 3m-long spectrometer dipole (MBAW) @ 10m to the right of the IP • Vertical deflection with nominal integrated field of 3Tm (deflection of 130μrad @ 7TeV) • The resulting orbit deflection is compensated by three dipole magnets • Two 1.5m-long magnets of type MBXWT @ 20m left and right of the IP • One 2.6m-long magnet of type MBWMD @ 10m to the left of the IP • Two Beam Position Monitors (BPMWS) are located upstream and downstream of the two MBXWT to monitor the internal bump closure D. Swoboda, TS/LEA LOC meeting, Y. Papaphilippou

  6. Injection optics around the IR2 LOC meeting, Y. Papaphilippou

  7. Internal crossing bump of IR2 • Internal crossing angle of ±70μrad in the vertical plane (maximum deflection of ±0.7mm at MBWMD) • External crossing angle follows spectrometer dipole polarity LOC meeting, Y. Papaphilippou

  8. Nominal injection crossing bump of IR2 • External crossing angle of ±80μrad in the vertical plane added giving an effective crossing angle of ±150μrad, when polarity of spectrometer follows the sign of the external angle • Beam size varies between 0.8 and 0.3mm • Deflection maximum of 6σ at MBWMD BEAM 1

  9. BEAM 1 MBAW IP2 MBWMD MBXWT MBXWT Nominal injection aperture in IR2 • Aperture varies for less than 3σ between the scheme with only internal and full crossing scheme • Around half of the available aperture is lost for all compensators and 40% for the spectrometer (but a lot of margin in that area)

  10. Internal crossing bump of IR2 with collision strength for the spectrometer dipole • Internal crossing angle of ±1089μrad in the vertical plane • Maximum deflection of ±0.011m at MBWMD, corresponding to 25σ, as compared to 0.0007m (1.6σ) of the nominal bump LOC meeting, Y. Papaphilippou

  11. Crossing bump in IR2 at injection with collision strength for the spectrometer dipole BEAM 1 • Maximum beam excursion of 0.012m (30σ) at MBWMD, as compared to 0.0004m (6σ) for the nominal scheme • When polarity and external crossing angle sign are mismatched, two additional crossings occur ~15m left and right of the IP (W. Herr, Chamonix 2006)

  12. BEAM 1 MBAW IP2 MBXWT MBWMD MBXWT Aperture in IR2 with full spectrometer dipole strength • Biggest loss in aperture around MBWMD • n1 takes equivalent values with MBWXT and IP2 in σ and even smaller in mm

  13. Aperture loss in IR2 by element • Not important impact in any element apart MBWMD • Available aperture of 9mm (with respect to 14mm), corresponding to 13σ of aperture loss • Remaining aperture is 30% of the available

  14. Beam 1 Beam 2 Beam 1 Beam 2 IR8 Injection optics (O. Brüning et al. LHC Project rep 367) • β*=10m, horizontal crossing angle of ±200 or ±75μrad depending on the polarity and vertical parallel separation of ± 2mm • External angle of ±65 (- polarity) or ±210 μrad (+ polarity) • Internal angle of ±135 μrad for compensating spectrometer orbit distortion • Horizontal crossing angle always negative for Beam 1 and positive for Beam 2 • Vertical separation sign can be chosen arbitrarily LOC meeting, Y. Papaphilippou

  15. LHCb dipole magnet D. Swoboda, TS/LEA • 1.9m-long spectrometer dipole (MBLW) @ 4.9m to the right of the IP • Horizontal deflection with nominal integrated field of 4.2Tm (deflection of 180μrad @ 7TeV) • The resulting orbit deflection is compensated by three dipole magnets • Two 0.8m-long magnets of type MBXWS @ 20m left and right of the IP • One 3.4m-long magnet of type MBXWH @ 5m to the left of the IP • Two Beam Position Monitors (BPMWS) are located upstream and downstream of the two MBXWS to monitor the internal bump closure LOC meeting, Y. Papaphilippou

  16. Injection optics around the IR8 LOC meeting, Y. Papaphilippou

  17. Internal crossing bump of IR8 • Internal crossing angle of ±135μrad in the horizontal plane (maximum deflection of ±0.6mm at MBXWH) • External crossing angle does not follow spectrometer dipole polarity • Note additional crossing at the edge of MBXWH(???) LOC meeting, Y. Papaphilippou

  18. Nominal injection crossing bump of IR8 • External crossing angle of ±65 or ±210μrad in the horizontal plane added giving an effective crossing angle of ±200 or ±75μrad, and polarity of spectrometer does not follow the sign of the external angle • Beam size varies between 0.7 and 0.3mm • Deflection maximum of 6σ at MBXWS BEAM 1

  19. BEAM 1 MBLW IP8 MBXWS MBXWH MBXWS Nominal injection aperture in IR8 • Differences with respect to IP2 on the 2nd compensator (smaller β) and spectrometer (smaller β and aperture) • Aperture varies for less than 3σ between the scheme with only internal and full crossing scheme • Around 50-60% of the available aperture is lost for all compensators and 40% for the spectrometer

  20. Internal crossing bump of IR8 with collision strength for the spectrometer dipole • Internal crossing angle of ±2100μrad in the horizontal plane! • Deflection of ±0.010m at MBXWH, corresponding to 29σ, as compared to 0.0006m (2σ) of the nominal bump LOC meeting, Y. Papaphilippou

  21. Crossing bump in IR8 at injection with collision strength for the spectrometer dipole BEAM 1 • Beam excursion of 0.011m (33σ) at MBXWH, as compared to 0.0004m (6σ) for the nominal scheme • When polarity and external crossing angle sign are mismatched, two additional crossings occur ~15m left and right of the IP (in total 4 crossings)

  22. BEAM 1 MBLW IP8 MBXWS MBXWH MBXWS Aperture in IR8 with full spectrometer dipole strength • Biggest loss in aperture around MBXWH • n1 correspond to even smaller values than MBWXS in mm [m]

  23. Aperture loss in IR8 by element • Not important impact in any element apart MBXWH • Available aperture of 6mm (with respect to 12mm), corresponding to 15σ of aperture loss • Remaining aperture corresponds 24% of the available

  24. Summary • Main limitations in IR2 and 8 in the aperture of 2nd compensator magnets • MBWMD in IR2 • Available aperture of 9mm (with respect to 14mm), corresponding to 13σ of aperture loss • MBXWH in IR8 • Available aperture of 6mm (with respect to 12mm), corresponding to 15σ of aperture loss • In both cases, n1 above 7σ, but available aperture quite small, especially in IR8 • Any decision should be based on the ability to control the orbit and optics within the tolerances given for computing the available aperture LOC meeting, Y. Papaphilippou

More Related