1 / 16

Integrating Bluetooth onto LEGO Robots

Integrating Bluetooth onto LEGO Robots. Andrew Jones Mike Krofcheck. Agenda. Project Purpose Project Solution and Goals Design Goals Results and Conclusions Acknowledgments Q & A. Problem to be solved. EECS 375 robot designs repeated often Limitations with wired communication

iman
Download Presentation

Integrating Bluetooth onto LEGO Robots

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Integrating Bluetooth onto LEGO Robots • Andrew Jones • Mike Krofcheck

  2. Agenda • Project Purpose • Project Solution and Goals • Design Goals • Results and Conclusions • Acknowledgments • Q & A

  3. Problem to be solved • EECS 375 robot designs repeated often • Limitations with wired communication • Difficult to download code • Robots don’t “talk” • Limited teamwork during competition

  4. Project Solution & Goals • Design integrated Bluetooth communication board for use with serial devices • Develop Bluetooth driver software for use with microcontroller • Integrate communication board with EECS 375 robots

  5. Design Steps • Acquire parts for project • Design high frequency RF antenna • Design/Fabricate PCB for module • Test and verify operation PCB • Integrate PCB with host computer • Integrate PCB with host microcontroller

  6. PCB/Antenna design Acquire BTM Verify PCB Micro. development Design Steps Mike Integrate Andrew/Mike Andrew/Mike Andrew/Mike Andrew

  7. Acquiring Bluetooth • Found module for purchase in U.K. • Windigo Systems BCM02C2XX-R • All-in-one solution • 68HC12 micro. development kit • Acquired from “Frank” • Feature set

  8. Antenna Design • Integrated Inverted-F Antenna (IIFA) • Compact size • Integrated on to PCB • Redundancy in antenna design

  9. PCB Design • High frequency concerns • Decoupling capacitors • Component placement • Antenna & ground plane • Test points

  10. PCB Verification • Visual inspection • Trace continuity • Initial RF output detection • Interface w/ host via RS232

  11. BTM Integration • RS232-to-UART converter • Voltage conversion process • Use of Max232 • Signal connection scheme

  12. BTM Integration

  13. BTM Integration TxD Conversion RxD

  14. Results & Conclusions • Generic BT communication board created that could interface with serial devices • BT developer support limited • Great deal learned during project • Future work on project ...

  15. Acknowledgments • Frank Merat • Bob Leskovec • Rob Barris • Quinton S.Q. Yuan

  16. Q & A

More Related