1 / 1

Proposal Floating MD for 48h (preliminary)

This proposal outlines a 48-hour floating MD plan scheduled from Monday, July 9, to Wednesday, July 11. Key activities include beam dump physics fills, ATS MD for pre-squeeze and very low beta, 25ns injection tests, Q20 setup, and high pile-up studies with standard optics. The schedule prioritizes transitioning to Q26 injection and conducting beta* leveling tests. The floating MD will conclude on July 11. This plan may be revised as the floating MD for the following week is canceled.

ianthe
Download Presentation

Proposal Floating MD for 48h (preliminary)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Proposal Floating MD for 48h(preliminary) • MON09/7 • 16:00 Beam Dump physics fill (need to come from high energy) • 18:00 ATS MD: Pre-squeeze and very low beta ATS (0.1 m) • TUE 10/7 • 07:00 Beam dump • 08:00 25ns injection tests • 13:00 Q20 set up • 17:00 High pile-up (~100): standard optics & 2b of 3e11 (Q20); collisions IR1&5 ; noise excitation, transverse offset etc • WED 11/7 • 03:00 Dump & ramp down; revert to Q26 injection • 04:00 Beta* leveling test up to 36b • 16:00 End of floating MD. • Cancel floating MD in the week after.

More Related