With a variety of tools for troubleshooting and resetting the laptop, HP is always prepared whenever the problem arises. The issue could be unable to access the company’s documents or the device’s slow performance. The power button on your device is of great importance as it can rescue from the situations of appearance of blank screen during start up or system freezes. The button powers the system down and then starts the booting process again. The only requirement is you need to remove the battery out of the device for completing the process properly.
If the HP device is On then turn it off and close its lid. Then remove any attached accessories or cables from your laptop i.e. wired or wireless keyboard, mouse, external hard drives, flash drives or memory cards. Turn the device upside down after unplugging the laptop’s power adapter. • Now, remove the device’s battery pack. It includes a release latch which is used to move to the lock and unlock position. Lift the battery out of case after sliding the latch to ‘Unlock’ option.
Then tap and hold the power button on your HP device for next 15 seconds and then release the key. • Now connect the device’s power adapter again.
Now turn on the laptop by pressing the power button without battery installed. The device will start booting and you will see status lights blinking in the front. You will see the HP and Windows splash screen appearing and the operating system will start loading. Once you see the Windows Desktop, your HP device will be reset. • Once you see the desktop click on ‘Start’ and ‘Shut Down’ button to turn off the laptop. Now, reinstall the battery once the shut down process is finished. And then turn the device on again.
By following the above steps, you can easily reset the HP device through power button and removing the battery out of the laptop.
There are several issues that can crop up while working on an important project on your laptop. There could be blank screen, keyboard not working properly, software trouble, slow performance etc thus, hampering the tasks in between. You can get your device fixed by getting in touch with the team of technicians by dialing HP Support Australia Number 1-800-958-239.You can discuss your concerns directly with the team. Original Source: Reset HP Laptop Through Power Button And Without Battery