1 / 4

Machining, Metrology, and Process Planning Division at Czech Technical University

The Machining, Metrology, and Process Planning Division at Czech Technical University offers testing of machinability, measurement of cutting parameters, quality control, production planning, and more. Contact us for expert assistance in machining and process planning.

homere
Download Presentation

Machining, Metrology, and Process Planning Division at Czech Technical University

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Czech Technical University in Prague Faculty of Mechanical Engineering Department of machining, process planningand metrology Head: Doc. Ing. M. Vrabec, CSc. Vice-head: Ing. P. Novák, Ph.D. Manager: Ing. BcA. J. Podaný, Ph.D. Secretary: M. Smolíková Phone: +420 224 352 611 +420 224 352 612 E-mail: 12124@fs.cvut.cz URL: http://u12134.fsid.cvut.cz

  2. Machining Division of: Machining Metrology Process and Systems Planning • Testing of machinability • Testing of cutting ability • Measurement of cutting parameters • Testing of CAM systems • Testing of machining on CNC machines

  3. Metrology Division of: Machining Metrology Process and Systems Planning • Quality control • Complex quality of production • Systems of quality control • Mechanical engineering metrology • Special methods of measuring • Technical standardisation

  4. Process and Systems Planning Division of: Machining Metrology Process and Systems Planning • Machining and assembly processes planning • Rationalization of production (lean production system) • Production systems planning and logistics (analysis of material´s flows) • Work analysis • Time and motions studies (MTM-1 and MTM-2 methods) • Automation of engineering works, computer aided techniques (CAE, CIM,…) • Evaluation methodology for the recycling process planning

More Related