1 / 50

DualMaster L-558R Operation Guide

DualMaster L-558R Operation Guide. ON/OFF. Basic Operations. Press down to turn ON. Press and hold to turn OFF. Basic Operations. Set ISO 1 & 2. Basic Operations. HOLD down for ISO Selection…. …while turning JOG WHEEL here. Basic Operations. 1˚ Spot Meter.

holli
Download Presentation

DualMaster L-558R Operation Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DualMaster L-558R Operation Guide

  2. ON/OFF Basic Operations

  3. Press down to turn ON Press and hold to turn OFF Basic Operations

  4. Set ISO 1 & 2 Basic Operations

  5. HOLD down for ISO Selection… …while turning JOG WHEEL here Basic Operations

  6. 1˚ Spot Meter Basic Operations

  7. Turn SPOT/INCIDENT SELECTOR SWITCH to select INCIDENT setting … Basic Operations

  8. Spot Icon will appear and blink … Basic Operations

  9. Aim through Viewfinder… Basic Operations

  10. …press measure button for SPOT reading. Basic Operations

  11. Incident Mode Basic Operations

  12. Turn SPOT/INCIDENT SELECTOR SWITCH to select INCIDENT setting … Basic Operations

  13. Incident Icon will appear and blink … Basic Operations

  14. Turn the Lumisphere Retracting Ring Counter-Clockwise to the full UP right position… Basic Operations

  15. …press measure button for INCIDENT reading. Basic Operations

  16. Brightness/Contrast Measurement Basic Operations

  17. Turn Lumisphere Retracting Ring clockwise to lower to DOWN position… Select Measuring Mode… Basic Operations

  18. …then press Measure button for reading. Basic Operations

  19. Measurement Modes Basic Operations

  20. AMBIENT ICON SELECTED To Select AMBIENT MODE Press the MODE key…while turning the JOG WHEEL… Basic Operations

  21. To Select CORDLESS FLASH MODE Press the MODE key… while turning the JOG WHEEL… CORDLESS FLASH ICON SELECTED Basic Operations

  22. To Select CORD FLASH MODE Press the MODE button…while turning the JOG WHEEL… CORD FLASH ICON SELECTED Basic Operations

  23. Radio Triggering Basic Operations

  24. To Select RADIO TRIGGERING hold MODE key in while turning the JOG WHEEL… RADIO ICON SELECTED Basic Operations

  25. …blinking channel number will appear…turn JOG WHEEL to select channel number. Basic Operations

  26. To Select Quad-Triggering sub-channels simply press direct function keys … A B C D Pressing the measure button once returns the screen to the main menu. Pressing the measure key again simultaneously fires flash and measures light. Basic Operations

  27. Memory Function Basic Operations

  28. Take a measurement and press the MEMORY button to store the setting… Basic Operations

  29. CINE Mode Advanced Functions

  30. Frames Per Second Display Turn JOG WHEEL (in T Priority Mode) past shutter speed 1/400 to select f/s(frames per second). Advanced Functions

  31. Averaging Function Advanced Functions

  32. Memorized Exposure 1 Memorized Exposure 2 After two or more measurements are Memorized, toggle AVE/∆EV key. Advanced Functions

  33. Memorized Exposure 1 Memorized Exposure 2 Average exposure will be displayed In digital and analog readouts. Advanced Functions

  34. Brightness Difference Advanced Functions

  35. Take measurement(s), press the AVE/∆EV button… A will display. Advanced Functions

  36. Press and HOLD down Measure button. The Difference between last memorized reading or averaged reading and new area measured is displayed. Advanced Functions

  37. Flash Analyzing Advanced Functions

  38. Percentage of FLASH COMBINED Reading In all flash modes: Take a Flash measurement. …A COMBINED reading of both AMBIENT and FLASH will be displayed. The FLASH Reading will be blinking. AMBIENT Reading FLASH Reading Basic Operations

  39. • Turn JOG WHEEL to adjust ratio between Ambient and Flash. Adjusted Ratios after Shutter Speed Change Advanced Functions

  40. EV/Readout Advanced Functions

  41. Hold down MODE KEY and turn JOG WHEEL until EV readout shows. Press measure button. Advanced Functions

  42. Multi-Flash Advanced Functions

  43. • Hold down the MODE key and turn JOG WHEEL to select Cord, Cordless or Radio Triggering MODE with MLT shown on Display… Advanced Functions

  44. • Trigger flash repeatedly until target f/stop is achieved… Display shows number of flashes triggered (3) Advanced Functions

  45. Exposure Compensation Advanced Functions

  46. Hold in both ISO1 and ISO2 buttons simultaneously and turn JOG WHEEL to Exposure Compensation Needed… Advanced Functions

  47. Calibration Advanced Functions

  48. • Meter must be turned OFF • Tap POWER Button…ONCE… while holding in bothISO1 and ISO2 buttons simultaneously… Advanced Functions

  49. • CAL will be displayed on panel… • Turn JOG WHEEL while holding down both ISO keys to compensate… Advanced Functions

  50. Congratulations! You are now ready to use your new meter!

More Related