1 / 22

Synthesis and Characterization of Polyisobutylene Succinimide Dispersants

hisa
Download Presentation

Synthesis and Characterization of Polyisobutylene Succinimide Dispersants

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Synthesis and Characterization of Polyisobutylene Succinimide Dispersants Yulin Wang CHEM 710 Presentation

    2. Outline Introduction Oil additives Polyisobutylene succinimide (PIBSI) Micelles Results Critical Micelle Concentration (CMC). Aggregation number (Nagg). Adsorption of PIBSI onto carbon black particles (CBPs). Future Work Acknowledgements

    3. Two Major Problems

    4. Oil Additives Additives commonly used in lubricating oils Oxidation Inhibitors Corrosion Inhibitors Rust Inhibitors Friction Modifying Additives Pour Point Depressants Detergents Dispersants Foam Inhibitors

    5. Carbon Deposits During normal operation, the engine generates a lot of Ultrafine Particles (UFPs) which have a diameter smaller than 100 nm. UFPs are mostly carbon-rich.

    6. Dispersants

    7. Bis Polyisobutylene Succinimide (PIBSI)

    8. Polyamines used to Synthesize PIBSI

    9. Micelles Micelles are aggregates of dispersants in the solvent. Depending on the different solvents used, the dispersants form micelles or reverse micelles. Two Important parameters: Critical Micelle Concentration (CMC) and Aggregation Number (N agg).

    10. Micelles

    11. Results

    12. Critical Micelle Concentration (CMC) CMC is the concentration when dispersants begin to form micelles. The CMC is measured with the ruthenium complex (RuNH2) which probes the dispersant micelles at the molecular level by fluorescence.

    13. CMC for PIBSIs in Hexane

    14. Aggregation Number (Nagg) Nagg is a measure of the size of the dispersant micelles. Turro and Yekta procedures1 are used to determine Nagg. KI is added as a quencher.

    15. Aggregation Number of PIBSI Dispersants

    16. Adsorption onto Carbon Black Particles (CBPs)

    17. Adsorption Isotherm ?: The amount of adsorbed dispersant at equilibrium.

    18. Langmuir Isotherm Langmuir isotherm is used to model the adsorption of molecules on a solid surface.

    19. 1/G vs. 1/Ceq

    20. Adsorption & Micellization The change in binding regime is observed for PIB-TEPA and PIB-PEHA when Ccbr is close to CMC. It suggested that micellization impedes binding of the succinimide dispersants to the CBPs.

    21. Future Work Characterize the micellization and adsorption of dispersants, and investigate the relationship between micellization and adsorption.

    22. Acknowledgements Dr. Soldatov Yu Shen.

More Related