1 / 5

STA Antenna Indication in VHT Capabilities

STA Antenna Indication in VHT Capabilities. Date: 2011-11-09. Slide 1. Executive Summary. Situation Via VHT Capabilities element, an AP can find out the minimum number of RX and TX antennas of a STA

helia
Download Presentation

STA Antenna Indication in VHT Capabilities

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. STA Antenna Indication in VHT Capabilities Date: 2011-11-09 Slide 1 Brian Hart, Cisco Systems

  2. Executive Summary Situation • Via VHT Capabilities element, an AP can find out the minimum number of RX and TX antennas of a STA • A client might silently have additional antennas and use them for proprietary PHY processing Problem • AP cannot make optimal decisions with silent antennas • E.g. a client switches antennas after sounding and AP sees unexpectedly lower BFing performance, and could lead AP to sound a channel more often than needed Solution • We propose to redefine two reserved bits in “VHT Capabilities Info field” to provide indication of the possibility of antenna pattern change.

  3. Situation: A STA advertizes min capabilities only • RX/TX MCS Map in VHT Supported MCS Set field in VHT Capabilities element lists the number of spatial streams and supported MCSs per SS • So AP can infer the minimum number of RX and TX antennas • Yet, there are many devices with more antennas than they indicate in their RX/TX MCS Map • The additional antennas are usually used for various PHY processing to enhance PHY layer robustness by antenna diversity techniques • 802.11ac forces a STA to remain silent about its additional antennas

  4. Problem: AP lacks info to make better decisions • There are devices with more RX antennas that perform antenna switching • Antenna switching causes the already sounded channel to be mostly useless for subsequent transmissions without AP knowing it, particularly for MU transmission • Frequent antenna switching could appear as channel change due to mobility, leading AP to interpret the associated client as a mobile STA and to sound the channel more frequently than it’s needed • Some STAs might switch RX antennas often, even per frame • A STA after antenna switching usually stays on the selected antenna(s), causing its TX antenna pattern to change without AP knowing it • This causes problem for the AP that performs advanced signal processing

  5. Solution: Allow STA to clarify its antenna capabilities • 1 bit: “RX Antenna Pattern Consistency” in VHT Capabilities element • Set to 0 if RX antenna pattern can change during association • Set to 1 if RX antenna pattern remains fixed during association • 1 bit: “TX Antenna Pattern Consistency” in VHT Capabilities element • Set to 0 if TX antenna pattern can change during association • Set to 1 if TX antenna pattern remains fixed during association

More Related