1 / 8

Sea State Bias in Satellite Radar Altimetry - Revisited

Sea State Bias in Satellite Radar Altimetry - Revisited. Jessica Hausman and Victor Zlotnicki. Sea State Bias. Jason-1. Actual sea surface. ~ 3% of SWH. Measured sea surface. x. Solve for SSB SSH 2 – SSH 1 = (SSB 2 – SSB 1 ) + E

helene
Download Presentation

Sea State Bias in Satellite Radar Altimetry - Revisited

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sea State Bias in Satellite Radar Altimetry - Revisited Jessica Hausman and Victor Zlotnicki

  2. Sea State Bias Jason-1 Actual sea surface ~ 3% of SWH Measured sea surface x

  3. Solve for SSB SSH2 – SSH1 = (SSB2 – SSB1) + E • 1 and 2 indicate time at the same geographical location. • SSH is the sea surface height above the ellipsoid • E is an error term (Gaspar et al. 2002). • Typically t1 is a time mean encompassing several years. • This technique may not resolve all of the physics that occur in the ocean, which can “leak” into the SSB calculation.

  4. To investigate we calculate SSB using SWH (significant wave height) and U (wind speed) from Jason-1 2003-2004 and SSH from ECCO2 and Labroue et al 2004. • Compute SSB by using a time difference subtracted from a time mean (Direct) and from collinear consecutive cycle differences (CCD). • The CCD method has a much shorter time difference (~10 days, the time difference between cycles) and any oceanic signals should be resolved with this method.

  5. 2003-2004 SWH(J1) vs. SSH(ECCO2) Correlation CCD, ∆SWH vs ∆SSH Direct, SWH vs SSH-<SSH>

  6. ECCO2 CCD : SSB=SWH(9x10-4 – 1x10-4SWH – 1x10-5U + 2x10-7U2) Parametric, SSB = SWH( + SWH+U + U2) Labroue CCD: SSB=SWH(-5x10-2 + 3x10-3SWH – 2x10-3U + 6x105U2) mm mm U m/s U m/s ECCO2 Direct: SSB=SWH(2x10-3 – 3x10-4SWH – 2x10-4U + 8x10-6U2) Labroue Direct: SSB=SWH(3x10-2 – 4x103SWH – 3x10-3U + 1x10-4U2) mm mm U m/s U m/s

  7. ECCO2, CCD Labroue, CCD Nonparametric,SSB = SSHin(x1j, x2i) + SSB(x1i) n(x1j, x2i), mean=-0.78 mm, std=53 mm mean=-136 mm, std=49 mm mm mm ECCO2, Direct Labroue, Direct mean=0.82 mm, std=74 mm mean=3 mm, std=40 mm mm mm

  8. Conclusions • Parametric shows that CCD gives values closest to those expected • Labroue nonparametric CCD gives values closer to expected than Direct • ECCO nonparametric does not show much difference between CCD and Direct because of the small scales

More Related