1 / 52

Connecting to the new Internet2 Network What to Expect…

Connecting to the new Internet2 Network What to Expect…. Steve Cotter Rick Summerhill FMM 2006 / Chicago. Outline. Network Infrastructures Services on The Infrastructures Description of Circuit Services Control Plane. The Network. Optical Topology. The Network.

harva
Download Presentation

Connecting to the new Internet2 Network What to Expect…

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Connecting to the new Internet2 NetworkWhat to Expect… Steve Cotter Rick Summerhill FMM 2006 / Chicago

  2. Outline • Network Infrastructures • Services on The Infrastructures • Description of Circuit Services • Control Plane

  3. The Network

  4. Optical Topology

  5. The Network • Made up of four architecturally distinct infrastructures: • the core infrastructure • the IP infrastructure • the Multiservice Switching infrastructure • the HOPI Testbed infrastructure • Initially, circuit services across different architectures will be kept separate to maintain integrity • As network matures, level of integration of infrastructures will increase

  6. Services

  7. IP Services • Continuation of IP services offered on Abilene plus commercial peering and commodity transit • 9 router locations: NYC, DC, Chicago, Atlanta, Houston, KC, LA, Salt Lake City, Seattle

  8. IP Services • Connector builds out to PoP and I2 will carry connection to the nearest backbone router • 10Gbps connection over core infrastructure • <10Gbps may go over multiservice switching infrastructure • Additional “opt-in” services will require separate BGP peerings, I2 suggests connect with: • VLANs enabled (Ethernet connections) • Frame Relay DLCIs set up for SONET connections

  9. Commercial Peering Service • As configured for beta trial, we anticipate using separate peerings between I2 and participating connectors • Use VLANs or Frame Relay DLCI • Connect at 10Gbps to commercial exchange points in Chicago, Palo Alto (PAIX), and possibly Ashburn • Ongoing trial - NTAC and I2 staff are seeking community input on how to best offer this service

  10. Commodity Transit Service • Offer optional Level3 commodity through IP connection at reduced rates • Level3 will also allow direct 1GE connections to Level3 commodity network • Will add other transit providers in the near future • Separate BGP peering requiring VLANs or DLCIs • NTAC Working Group providing input

  11. MPLS Services • Internet2 network staff and the IU NOC will work with connectors to implement MPLS tunnels through the Internet2 Network on a case-by-case basis

  12. HOPI Test Service • Purpose is to allow experimentation in implementing and using dynamic circuits • Experimental in a number of ways: • Footprint limited Internet2 Network footprint • Uses experimental control plane software to create circuits and to interconnect with other domains using their control software • Allows other networks to interconnect with it to test their interdomain circuit capabilities

  13. HOPI Test Services • Connect at I2 PoP with HOPI access point • Physical connection can have one or more sub-circuits over 1G or 10G interface • Kinds of connections expected to change over time as other devices added • Initially, use existing HOPI Force 10 Ethernet switches

  14. HOPI Test Services • Connections across HOPI are p-2-p Ethernet VLAN based circuits in increments of 100 Mbps • User input devices must support 802.1q VLAN capabilities • Requests for bandwidth can me made using: • GMPLS-style Peer Mode, GMPLS-style UNI Mode, Web Service API or email/phone

  15. HOPI Test Services • HOPI may be used to: • Test dynamic services developed by other domains • Likely interconnect HOPI to test labs and with other organizations (regionals) • Test applications prior to using them on dynamic or static circuit services (i.e. performance measuring software for dynamic networks) • For more information, contact Rick Summerhillrrsum@internet2.edu

  16. Circuit Service • Major aspects of the circuit service: • Physical connection between Internet2 and user device (type and speed) • Circuit bandwidth (multiples of STS-1s) Note: Speed of interfaces do not have to match

  17. Static Circuit Service Overview • Longer lasting point-2-point circuits across network by connecting to Infinera or Ciena gear • Infinera via 10GE or OC-192 interfaces • Across network can be either Ethernet or SONET framed • Ciena via 1GE, 10GE or SONET OC-48, OC-192 interfaces • Ethernet frames encapsulated in SONET using GFP • SONET can be channelized or not (OC-48 or OC-48c) • Across Network is always SONET in multiples of OC-1 • Provisioned by Internet2 NOC in coordination with user’s NOC.

  18. Multiservice Switch Description • Each Ciena Multiservice Switch has two or more trunk side SONET circuits connecting it to other switches • Client side can be Ethernet or SONET - 1GE, 10GE or OC-48, OC-192 interfaces • Ethernet frames encapsulated in SONET using GFP • SONET can be channelized or not (OC-48 or OC-48c)

  19. Dynamic Circuit Service Overview • Shorter period (minutes to months ) point-2-point circuits across Network • Connected to Ciena Multiservice Switching infrastructure • Connect as single circuit to be switched or multiple circuits multiplexed over the physical connection • Will use a set of waves on the core infrastructure dedicated to the dynamic wave service

  20. Dynamic Circuit Ethernet Requirements • All Ethernet connectors must be capable of supporting 9K (MTU) payload frames. • Ethernet participants may be tagged with VLANs or untagged, and VLANs may be switched internally on the transport. • That is, a VLAN tag on one end need not be the same as a VLAN tag on the far end. • Physical connections that use Ethernet must support 802.3x (flow control). • Physical connections using Ethernet VLANs must support 802.1q (VLAN).

  21. Dynamic Circuit Details - Ethernet • Provided as a p-2-p Ethernet circuit • Frames are encapsulated into SONET streams using Generic Framing Protocol (GFP). • Encapsulation and decapsulation done at ingress/egress • Streams divided into one or more OC-1 channels using Virtual Concatenation (VCAT) • It is strongly recommended that all Ethernet connectors support IEEE 802.1p (flow control) • Circuits between networks passed as GFP encapsulated SONET

  22. Dynamic Circuit SONET Requirements • All SONET connectors must support VCAT and LCAS • All SONET connectors providing Ethernet services must support GFP

  23. Dynamic Circuit Details - SONET • Provided in multiples of OC-1s • Incoming SONET can be channelized or not (i.e. OC-48 or OC-48c) • Connections across the Ciena MS infrastructure are always SONET

  24. Multiservice Switching Infrastructure Control Plane

  25. Multiservice Switch Control Plane Overview • Control plane software will: • Manage the set up of dynamic circuits • Keep track of bandwidth • Allow reservation of future bandwidth • Authenticate users requesting bandwidth • Report on network status • Additional software integrated with Ciena software to provide additional capabilities

  26. Dynamic Circuit Control Plane • Automated services are expected in the near future • Will use DRAGON-style control plane capabilities • Control plane channels will be transported via IP, and connectors will be offered several options for implementation and/or interaction with the dynamic control plane • Initial deployments of control plane software will take place on HOPI test service before moving to the production network

  27. Dynamic Circuit Service Provisioning

  28. Dynamic Circuit Service Provisioning • Uses control plane software to set up circuits • Initially only I2/NOC staff after requested by user • Eventually software added to allow circuits to be created by user request • For cross-domain circuits, think of I2 Network circuits as segments of longer p-2-p circuits • Cross-domain coordination via email/phone or software to do automatically • Contact the NOC for circuit setup, NOC engineer will be assigned to coordinate with other networks to create the required paths across the network.

  29. Dynamic Circuit Service Provisioning • Cross-domain connections require appropriate control plane software • Internet2 will provide experimental software to regionals

  30. Connecting Dynamic Circuits to Users • Scenario #1: Two regionals and their users • Physical connections to regionals made – we expect this will typically be an Ethernet connection that supports VLANS • Each regional creates VLAN circuit to its user and makes connection to Internet2, then segments joined to create end-2-end circuit

  31. Connecting Dynamic Circuits to Users • Typically regional provides its own circuit multiplexing for its user and provides circuit to I2 • Multiplexed connection sent across I2 network and delivered to end regional • Circuits set up and managed by control plane software • May be done automatically across regional domains if using compatible control plane software

  32. Connecting Dynamic Circuits to Users

  33. Connecting Dynamic Circuits to Other Networks • Scenario #2: Connecting to similar services provided by other national or international networks • By either direct connections or at exchange points • Control plane interface is similar to the I2/RON model • I2 working on user authorization and network information sharing with other networks

  34. Connecting Dynamic Circuits to Other Networks • Using these interconnections and appropriate manual and automatic control of circuit switching, Internet2 will be able to be a partner in creating circuits from users in the United States to users connected to other international core networks • Today, working to define service definitions and info sharing policies to enable this

  35. Applications • TeraGrid • High definition videoconferencing • eVLBI Radio telescopes • Remote medicine • IP load shifting • File transfer – Phoebus / VFER

  36. Control Plane Rollout

  37. Control Plane Rollout – Current Plan • Initially, Ciena control plane will be used to create circuits by NOC from user requests • Feb 2007 – web form available to request connection, initially filled by NOC • Web form to interface with control plane software to make connections without NOC intervention • Feb/Mar 2007 – software made available to regionals for them to provide switched circuits to users

  38. An Example of How to Connect to HOPI and the Internet2 Network - Phase 1 • Campus connects through RON using static VLANs and deploys VLSR on PC connected to switch (GMPLS control plane) • Ethernet based • Connect to HOPI control plane

  39. Phase 2 • Add NARB (could be same PC) • Separates the campus domain from HOPI domain • Now have separate control planes

  40. Phase 3 • When ready, RON implements GMPLS control plane

More Related