1 / 10

Prototype ROD

Prototype ROD. Prototype ROD (6U VME) Requirements 4 channel (CPMs) prototype Perform zero suppression Perform parity check Format data Buffer formatted data Readout via S-Link (160 Mbyte/s) Spy on ‘Events’ transferred. Prototype ROD (CP/Jet). Test Set-up. Prototype ROD (CP/Jet).

hanne
Download Presentation

Prototype ROD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Prototype ROD • Prototype ROD (6U VME) • Requirements • 4 channel (CPMs) prototype • Perform zero suppression • Perform parity check • Format data • Buffer formatted data • Readout via S-Link (160 Mbyte/s) • Spy on ‘Events’ transferred

  2. Prototype ROD (CP/Jet) • Test Set-up

  3. Prototype ROD (CP/Jet) • Test Set-up in the lab

  4. Prototype ROD (CP/Jet) • Testing Slice data (CP) • Serialiser data (20 serialisers/CPM)

  5. Prototype ROD • Testing RoI Data (CP) • RoI data (eight CP Chips/CPM)

  6. Prototype ROD (CP/Jet) • Data received and formatted on the ROD • Data sent on to the DSS via S-link • Data captured on the ROD spy buffers ‘Event’

  7. Prototype ROD (CP/Jet) • Status summary and plans • Two modules at same status • More tests and minor bugs to be sorted out

  8. Prototype ROD (CP/Jet) • Firmware for the prototype ROD • Combine designs 1 & 2 and designs 3 & 4 to use one ROD per combination. • Four more designs to do. • If the format is given (as in CP RoIs) then RAL can do the designs (preferred)

  9. Prototype ROD (CP/Jet) • Two more modules will be assembled after few more tests • Two (four) PCBs and components need to be ordered for slice test requirements. • Total of six (eight) prototype ROD modules for the slice tests.

  10. Prototype ROD (CP/Jet) • More S-Link cards ordered (Delivery March/April 2001) • Six optical ODIN Double (160 Mbyte/s) LDCs • Six optical ODIN Double (160 Mbyte/s) LSCs • Six S-link to PCI carrier cards (destination)

More Related