1 / 24

Niki Farnsworth R. Steven Turley

Surface Roughness of Thorium and Thorium Oxide and its Effect on Optical Properties in the Extreme Ultraviolet. Niki Farnsworth R. Steven Turley. Why the Extreme Ultraviolet?. Roughness. Why do we care?. Roughness. Roughness affects the way a surface reflects. Characterization of Roughness.

ginsburg
Download Presentation

Niki Farnsworth R. Steven Turley

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Surface Roughness of Thorium and Thorium Oxide and its Effect on Optical Properties in the Extreme Ultraviolet Niki Farnsworth R. Steven Turley

  2. Why the Extreme Ultraviolet?

  3. Roughness • Why do we care?

  4. Roughness • Roughness affects the way a surface reflects.

  5. Characterization of Roughness • The easiest way to characterize roughness is to measure it directly. • ATOMIC FORCE MICROSCOPY

  6. Our Data RMS roughness of 4.3 nm over a 1000x1000nm length scale. Peak roughness at horizontal length scales on the order of 50 nm.

  7. Too Good to be True? • It wouldn’t be interesting physics research if it were this simple. • Problem: What happens when the tip size is on the order of the horizontal length scales of our roughness?

  8. Too Good to be True?

  9. Now what? • Do AFM measurements tell us anything about the surface? • How accurate are the RMS roughnesses it reports? • How accurate are the power spectral densities it reports?

  10. Solution: Model it • Different types of rough surfaces • Change horizontal length scales • Change correlation length • Change magnitudes • Different types of tips • Change tip shape • Change tip size

  11. Solution: Model it • Assumptions: • Horizontal length scale = 20 nm. • Magnitude is a Gaussian of width 1nm around zero. • Tip shape is a parabola.

  12. Changing Tip Sizes

  13. Changing Tip Sizes tip width = 10 nm tip width = 20 nm tip width = 15 nm tip width = 30 nm

  14. Changing Tip Sizes

  15. Changing Tip Sizes

  16. Changing Tip Sizes tip width = 10 nm

  17. Changing Tip Sizes tip width = 15 nm

  18. Changing Tip Sizes tip width = 20 nm

  19. Changing Tip Sizes tip width = 30 nm

  20. Comparing to Our Data dx = 20 nm, tip width = 30 nm

  21. Comparing to Our Data • The horizontal length scales of our surface roughness are approximately 2/3 the size of our tip. • The real RMS roughness of our surface could be up to 2.7 times that measured by the AFM (up to 11.6 nm).

  22. How Does this Affect Reflectance Data?

  23. Conclusions • The discrepancy in the roughness measured by the tip and the actual roughness of the surface could be different by as much as 7.3 nm. • Failure to take this difference into account could change our calculated reflectance by up to 35%. • This discrepancy could be fatal to our calculation of optical constants for that material.

  24. Acknowledgements • Dr. R. Steven Turley • Dr. David D. Allred • The BYU Thin Films Group • Physics and Astronomy Department Funding • Rocky Mountain NASA Space Grant

More Related