1 / 8

2.4 D/A 转换器及其接口技术 ( Analog Digital Converter)

2.4 D/A 转换器及其接口技术 ( Analog Digital Converter). 数字量 U, I 的器件 ,常用8, 10, 12 bit。. 技术指标: 分辨率; 建立时间; 线性误差。. 2.4.1 D/A 转换器. 1. 8 位 D/A 转换器 DAC0832 ( FIG 2.27 ) a. 性能: 分辨率为8位,电流输出,采用20脚双立直插式封装, 建立时间1 us。 b. 组成: 8位输入寄存器,8位 DAC 寄存器,8位 D/A 转换器, 控制逻辑。.

gerd
Download Presentation

2.4 D/A 转换器及其接口技术 ( Analog Digital Converter)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2.4 D/A转换器及其接口技术(Analog Digital Converter) 数字量 U, I的器件 ,常用8, 10, 12bit。 技术指标: • 分辨率; • 建立时间; • 线性误差。

  2. 2.4.1 D/A转换器 1. 8位D/A转换器DAC0832 ( FIG 2.27) a. 性能: 分辨率为8位,电流输出,采用20脚双立直插式封装, 建立时间1us。 b. 组成: 8位输入寄存器,8位DAC寄存器,8位D/A转换器, 控制逻辑。

  3. 引脚功能: • DI7~0数字信号输入端。 • IOUT1~2模拟电流输出端。 • IOUT1+IOUT2=C 见 表P39。 • ILE—输出锁存允许。 • CS—片选。 • WR1—写选通。 WR2—二级写。 • XFER—传送控制。 VREF—参考电压。 • Rbf—反馈电阻。 VCC—电源 • AGND—模拟地 DGND—数字地

  4. 12位D/A转换器DAC1210 • 与DAC0832的区别: • a . 12bit DI0~11 • b. 24脚 • c. 字节控制BYTE1/BYTE2= • 12bit 输入 • 0 低4bit 输入

  5. 2.4.2 D/A转换器接口技术 1. DAC0832与PC总线连接 ( FIG.2.29) D0~7—DI0~7 IOUT1,2—运放输入 Rfb — V0运放输出 XFER,WR1,WR2,DGND接地,单缓冲输出。 A0~9译码 AEN IOW CS—Y0 I U

  6. -5V 0~+5V 输出 -10V 0~+10V 输出 VREF

  7. 2. 12位D/A转换器与PC总线工业控制机接口 • ( FIG 2.30) • 译码: Y0—300H高8位寄存器; • Y1—301H低4位寄存器; • Y2—302H—XFER(12bit 寄存器) • 12bit数据:高8位 D0~7—DI4~11 • 低4位 D4~7—DI0~3 • 输出:A1电流 负极性 • 电压输出 • A2极性转换。

  8. 过程: • Y0 BYTE1=1 高8位送入; • IOW • Y1 BYTE2=0 低4位送入; • IOW • Y2 IOW 12位送入DAC; • Y2 或IOW 数据锁存12位寄存器。

More Related