Find Out How To Polish A Wooden Floor With This Step By Step

1. Find Out How To Polish A Wooden Floor With This Step By Step If you are looking for a floor polishing service near me, then you must know the step-by-step process before hiring any professional such as Finished floors Inc.: - Remove All The Things And Particles That Scratch The Floor When Polishing If there are holes or cracks in the wooden boards, they can be filled by mixing the sawdust or dust that comes from polishing and a little cold glue. Or with virgin wax, which is melted in hand and spread with a spatula to fill the hole, when it cools down, it can be sanded and takes on the tone of the rest of the floor. Pass the sander over the entire surface; it is done in long and straight sections, trying not to stop between each pass so that there is no sanding unevenness. Change the sandpaper to 100, which will make a more refined polish. Run the sanding machine over the entire surface again. Change the sandpaper for a 120 that will give the finest final polish. Run the sanding machine over the entire surface again. The edges and edges of the floor are sanded with the trimmer, a smaller machine with a round disc reaching all corners. A manual scraper improves the polishing finish, removing stains. Although the polishing machines bring fabric bags that expel the dust, you have to vacuum the entire floor, and the edge with the dust covers very well after finishing sanding. Complement the cleaning by passing a damp cloth that absorbs the stuck dust. Dilute the vitrified in 50% turpentine and apply the first layer of polyurethane vitrified with a broad brush. Let dry for 24 hours. Once the first layer is dry, with 400 grit sandpaper, polish the floor to remove any hair or lint. Dilute the polyurethane vitrified. It transits through the vitrified floor only after 48 hours and moves the furniture after five days. Contact Finished floors Inc. for floor polishing services near me at (+1 800-240-0959), or visit Orangevale, CA. info@finishedfloors.com