1 / 4

Equipment Installation Fixtures Review & Support at LLO LOS

Detailed review of equipment installation fixtures and support at LLO, including suggestions for improvements. Factors like centering, crank mechanism, and support rollers are discussed. Further recommendations for the project schedule. Visit the link for additional photos.

falala
Download Presentation

Equipment Installation Fixtures Review & Support at LLO LOS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LLO LOS Installation Fixtures Review Support Beam Rolled on edge inside chamber as planned, but kept jamming as it was not centered within the chamber Suggestion: Additional side supporting rollers Lazy Susan (Shuttle) Worked fine, but had to be clamped down in place during LOS installation Suggestion: Adjustable set screws or clamps mounted on table

  2. LLO LOS Installation Fixtures Review Lift Table Functional, but hard to crank with full load. A larger hand crank was installed. Double crank mechanism did not seem to cause any problem. Suggestion: Re-design Lift Table, Enclosed Hydraulic Jack w/ Expandable Bellow Tilt Table Over-constrained, got bent during LOS installation at LLO. Suggestion: Remove center ball with a hard-bolted spherical washer set, leave corners adjustable with set screws Additional photos here: http://www.ligo-la.caltech.edu/~ospjeld/fixtures/

  3. Project Schedule

  4. Project Schedule

More Related