1 / 12

Block Addressed WUR Frame

Block Addressed WUR Frame. Date: 2018-09-02. Authors:. Abstract. As defined in Draft D0.4, the Address field of the WUR Wake-up frame is set to The WUR ID when the frame is individually addressed The group ID when the frame is group addressed

ewall
Download Presentation

Block Addressed WUR Frame

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Block Addressed WUR Frame Date: 2018-09-02 Authors:

  2. Abstract • As defined in Draft D0.4, the Address field of the WUR Wake-up frame is set to • The WUR ID when the frame is individually addressed • The group ID when the frame is group addressed • The transmit ID when the frame is broadcast addressed • 0 when multiple WIDs are included in the Frame Body field of the frame. • A WUR frame with group ID in the Address field is a group addressed WUR frame that is addressed to all the WUR STAs identified by that group ID. • An WUR AP shall indicate the group IDs assigned to a WUR STA in the Group ID List subfield of the WUR Parameters field of the WUR Mode element that is sent to the STA if the STA indicates the Support Group IDs • A method about multiple WID addressed WUR frame with flexible multi-WID grouping is proposed in this proposal.

  3. Proposal • AP uses block granularity parameters to divide WUR STA addressing space into blocks. Block granularity parameter means how many WUR STAs with contiguous WIDs in WUR addressing space are contained in one block. • AP signals block granularity parameters to WUR STAs in WUR Operation element. • AP implicitly signals block IDs by mapping the WUR ID space with granularity parameters • The WUR STAs are grouped based on the block granularity parameters, and each block is identified the block ID. • Eg. block granularity parameter may be set to 2 octets, 4 octets, 8 octets and 16 octets, respectively. • A specific WUR STA can belong to multiple blocks with different block granularity.

  4. Block ID Allocation Scheme • As an example shown above, one WUR STA can belong to multiple blocks based on the block granularity. • WUR STAs of range 1 to 16 belong to block ID #1 and STAs of range of 17 to 32 belongs to block ID #2 respectively when block granularity is x • WUR STAs of range of 1 to 32 belong to block ID #m+1 when block granularity is 2x • When ONLY STAs within range 1 to 16 are to be waken up, the AP can send a multi-WID addressed wake-up frame with block ID #1 for example. • When STAs within range of 1 to 32 are to be waken up, the AP can send a multi-WID addressed wake-up frame with block ID #m+1 for example. • A block ID identifies a group of one or more WUR STAs and is selected from a group ID space, obtained from the identifier’s space. IDs for WUR STA(WID) … block granularity x Block ID numbering #1 #2 #3 #4 # m … block granularity 2x STA 1 to 16 STA 17 to 32 # m+1 # n STA 1 to 32

  5. Block addressed WUR frame format • A Block addressed WUR frame is a WUR frame with the proposed definition of the subfields as below. • Frame Control field: • the Length Present field is set to 0 to indicate the Length/Misc field contains Misc field • Address filed: The address field is set to block ID • NO frame body field

  6. Conclusion • We discussedflexibleBlock ID allocation scheme in this proposal. • AP notifies block granularity parameters to WUR STAs. • By knowing block granularity, a WUR STA could determine which block(s) it belongs, and its position in the block(s). • AP signals a block addressed WUR frameusing the block ID in the address field. • By using this scheme, • AP does not need to explicitly signal the specific block IDs which the WUR STA belongs to. • Only WUR STAs belonging to a block indicated in the address field of the WUR frame will wake up.

  7. Straw Poll 1 • Do you agree the Block ID allocation scheme shown in slide 3 and 4?

  8. Straw Poll • Do you agree the block addressed WUR frame format in slide 5?

  9. Proposed text change • 31.3 Setting the identifiers of WUR frames • 31.3 Setting the identifiers of WUR frames • 31.3.1 General • The compressed BSSID is equal to the 32-bit CRC calculated over the BSSID contained in Beacon frames transmitted by the WUR AP (calculation is performed as defined in 9.2.4.8 (FCS field) where the BSSID is the calculation fields).The Address field of WUR frames contains an identifier (ID) that is selected from the range 0 to 4095. Each identifier can be a transmit ID, which is obtained from the compressed BSSID (see 31.3.2 (Transmit ID)), group ID (see 31.3.3 (Group ID)), ora WUR ID (see 31.3.4 (WUR ID)), or a block ID(see 31.3.5 (Block ID)). • 31.3.5 Block ID • A block ID identifies a group of one or more WUR STAs which belong to the same WID block based on block granularity parameters from the most recent WUR Operation element sent by AP and is selected from a groupID space obtained from the identifier’s space. A WUR frame with the blockID in the Address field is a block addressed WUR frame that is addressed to all the WUR STAs identified by the block ID in the address field of the received WUR frame. • A WUR STA that has indicated support for block IDs shall determine the block IDs based on block granularity parameters from the most recent WUR Operation element received from AP.

  10. Proposed text change • 9.10.2.2 Address field • The Address field contains an identifier for the WUR frame. The identifier is selected from Table 9-533b (Identifiers of WUR frames) and depends on the type of WUR frame (see 9.10.3 (Format of individual WUR frame types)).

  11. Proposed text change • 9.4.2.275 WUR Operation element • The WUR Operation element contains the set of parameters necessary to support the WUR operation. The format of the WUR Operation element is defined in Figure 9-751h (WUR Operation element format). • Octets 5 Figure 9-751h WUR Operation element format • The format of the WID Block granularity parameters field is defined in Figure 9-751j (WID Block granularity parameters field format). • B0 B11 B12 B23 B24 B35 B36 B38 B39 • Bits 12 12 5 2 1 Figure 9-751h WUR Operation element format • The Starting WID field indicates the starting WID in the WID space. • The Ending WID field indicates the ending WID in the WID space. • The Starting block ID field indicates the starting block ID in the identifier space • Basic unit field indicates the number of WIDs that the basic block contains • Scale factor field indicates the scale that apply to the basic unit; “0” means 2x and “1” means 4x

  12. References [1]Draft P802.11ba D0.4

More Related