1 / 38

Elements & Media

Elements & Media. Elements/Media. Types Comparison Which one do I use? Construction Testing. Types. Cellulose Fiberglass Wire Mesh Water Removal. Cellulose. Cellulose. Denoted by a “C” - (10C) Phenolic resins hold pleat shape after curing Not recommended for HWCF

evania
Download Presentation

Elements & Media

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Elements & Media

  2. Elements/Media • Types • Comparison • Which one do I use? • Construction • Testing

  3. Types • Cellulose • Fiberglass • Wire Mesh • Water Removal

  4. Cellulose

  5. Cellulose • Denoted by a “C” - (10C) • Phenolic resins hold pleat shape after curing • Not recommended for HWCF • Difficult to achieve < 5 micron removal due to large fiber size • Old technology, commodity type of element

  6. Wire Mesh

  7. Wire Mesh • Stainless steel • Cleanable media with some % loss of life • Difficult to clean elements rated below 40 micron • Rated as mesh size or micron size pore 200 mesh = 74W (74 micron)

  8. Element Cleaning 1)Remove external build-up with cleaning fluid in separate tank 2)Immerse element for 30 minutes in cleaning fluid 3)Flush opposite direction as oil flow with water & air

  9. Element Cleaning 4)Continue to flush with air only 5)Immerse in ISO-Propyl -Alcohol to remove remaining water particle 6)Air dry element and package for future use

  10. Fiberglass

  11. Fiberglass • Latest technology for solid particle removal • Microglass III is our current version • Denoted by a “Q” - (10Q)

  12. MicroGlass III Upstream Support Mesh • Dual Layer construction Micro-glass Capacity Layer Micro-glass Efficiency Layer Polyester Spun-bonded Support Layer Downstream Support Mesh Support Core

  13. Typical capacity layer (100x) MicroGlass III • Dual Layer construction Capacity Layer • High Loft • Void Volume • Protects Efficiency Layer

  14. Typical efficiency layer (100x) MicroGlass III • Dual Layer construction Membrane Efficiency Layer • Ultrathin .007” • Increased Filtration Area • Laminated to Support Scrim • Fixed Pore Size

  15. MicroGlass III vs. II • Equivalent Efficiency • Equal or Greater Dirt Holding Capacity • Much Lower Clean Pressure Drop • Lower Energy Consumption • Lower stress on filter construction • Less chance of bypass in cold conditions • Opportunity to upgrade to higher efficiency

  16. MicroGlass III vs. IITested Per ISO 16889 to 4 bar (60 PSID) 114LPM (30 GPM) 10mg/L BUGL

  17. MicroGlass III vs. II Tested Per ISO 3968

  18. MicroGlass III vs. II Tested Per ISO 16889 to 4 bar (60 PSID) 114LPM (30 GPM) 10mg/L BUGL

  19. MicroGlass III vs. II Tested Per ISO 3968

  20. MicroGlass III vs. IITested Per ISO 16889 to 4 bar (60 PSID) 114LPM (30 GPM) 10mg/L BUGL

  21. MicroGlass III vs. II Tested Per ISO 3968

  22. MicroGlass III vs. Competition Tested Per ISO 16889 to 6.8 bar(100 PSID) 114LPM (30 GPM) 10mg/L BUGLJanuary 8, 2001

  23. ß = 75 ß = 200 ß = 75 ß = 200 MicroGlass III vs. Competition Tested Per ISO 16889 to 100 psid 114LPM (30 GPM) 10mg/L BUGL January 8, 2001

  24. MicroGlass III vs. Competition Tested Per ISO 3968 January 8, 2001

  25. Comparison

  26. Comparison

  27. Ecoglass II

  28. Ecoglass II • Line of non-metallic filter elements meeting ecological demands for longer life and reduced disposal. • Up to 60% less disposal volume. • Par-Fit designs that do not require customer retrofit, or relocation of bypass valves which compromises performance.

  29. Par-Gel

  30. Par-Gel • Small amounts of water • Removes free water only • Low flow density

  31. Par-Gel New pleat before absorption Used pleat swelled from water retention

  32. Interchanges

  33. Par-Fit • Must compare efficiency, dirt capacity, and pressure loss at the same micron size

  34. Element A Price: $20.00 Dirt capacity: 5 grams Price-per-gram: $4.00 Element B $30.00 10 grams $3.00 Price-Per-Gram

  35. Multi-pass Test • To compare tests • Flow Rate • Terminal Pressure • Injection rate • Concentration • Element size • Contaminant type

  36. Elements & Media

More Related