Connect Canon mx492 Printer to WiFi

1. Canon PIXMA MX492 Wireless Printer Setup Call us Toll-Free USA/CA: +1-844-266-0040  UK: +44-808-164-5280

2. Canon PIXMA MX492 Wireless Printer Setup • The Canon MX492 setup is a compact printer for home and office use. You have to set it up after you purchase the printer from the supplier. Configure your printer’s hardware and software step-by-step and simple instructions in the upcoming subjects. Our technical support team can also provide advice by contacting them. • Canon PIXMA MX492 Printer Setup • Before unpacking the printer, check if the printer box is sealed properly. • Open the box and check if the printer components are provided in it. • Take the Canon Pixma MX492 printer from the box and keep it on a flat surface. • Remove the protective cover from the printer. • Peel off the orange colored protective tapes on the printer.

3. Take the power cable provided in the printer package and link it to the respective port of the printer & power supply. • Power on the printer by force pressing its power button. • Configure the settings on the control panel of the printer. • Unpack the ink cartridges and insert into the corresponding slots. • Load the paper tray with suitable papers. • Install the printer software on your computer and complete the first time Canon PIXMA MX492 setup printer. • Setup a Canon PIXMA MX492 Wireless Printer • One of the best techniques to connect your Canon Pixma MX492 printer and computer is the wireless link. The following subjects explain the simple and fast procedure for setting up the wireless link on the Canon Pixma MX492 printer. • On the function panel of the Canon Pixma MX492 printer, tap the Setup button. • Use the arrow buttons and select Wireless LAN Setup. • Tap the OK button.

4. Download the recent version of the Canon Pixma MX492 printer driver that suits the operating system version of your computer or laptop. • Set the connection method as a Wireless LAN connection. • Enable the radio button of Connect Via Wireless Router (recommended). • Carry out the instructions on the screen and complete the wireless connection on the Canon Pixma MX492 printer. • Connect Canon PIXMA MX492 Printer to Wifi • Power on your router and ensure it has an active internet connection. • Ensure the Canon PIXMA MX492 setup printer is powered on. • On the printer’s control panel, tap the Setup button. • Utilize the directional arrows and click Wireless LAN Setup. Press OK. • Now the printer searches for the network of your router. • Tap and hold the WPS button on your router. • Press OK on the control panel of the printer. • Finally, select Copy and connect your Canon Pixma MX492 printer to Wi-Fi.

5. GET IN TOUCH WITH US Call us Toll-Free : USA/CA: +1-844-266-0040  UK: +44-808-164-5280 Mail us :  support@canonprintersupport247.com

6. THANK YOU