1 / 67

TOPIC 6

TOPIC 6. INPUT/OUTPUT AND INTERFACING. 6.1 Input/output Operation. Content Definition Data Transfering Technique Direct transfer Interrupt Direct Memory Access (DMA). I/O mechanisms (Handshaking). 6.1.1 Definition.

enowak
Download Presentation

TOPIC 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TOPIC 6 INPUT/OUTPUT AND INTERFACING

  2. 6.1 Input/output Operation Content • Definition • Data Transfering Technique • Direct transfer • Interrupt • Direct Memory Access (DMA). • I/O mechanisms (Handshaking)

  3. 6.1.1 Definition In computing, input/output(I/O), refers to the communication between an information processing system (such as a computer), and the outside world possibly a human, or another information processing system. Inputs are the signals or data received by the system, and Output are the signals or data sent from the system. Examples of I/O devices: Input devices - Keyboard, mouse Output Devices - video screen, printer and etc.

  4. 6.1.2 Data Transfering Technique Three technique are possible for I/O operations: Direct Transfer Interrupt Direct Memory Access

  5. 6.1.2.1 Direct Transfer Also known as ProgrammedI/O . With ProgrammedI/O , data are exchange betweenthe CPU and I/O module. The CPU executes a program that gives it direct control of the I/O operation. When the CPU executes an instruction relating to the I/O, it issues a command to the appropriate I/O module. The CPU periodically check the status of the I/O module until it finds the I/O operation is complete.

  6. … cont’d • Programmed I/O takes place when an instruction in the program performs the data transfer; for example: MOVE.B Keyboard,D0 - to read a byte of data from the keyboard and puts it in D0. • Some microprocessors have special instructions that are used only for I/O; for example: OUT 50

  7. 6.1.2.2 Interrupt • A computer executes instructions sequentially unless a jump or a branch is made. • An interrupt is a process or a signal that stops a microprocessor/microcontroller from what it is doing so that something else can happen. • In other words an interrupt is defined as a break in the normal flow of operation of a computer caused by an interruptsignal. • An interrupt may be a signal from a peripheral (i.e., a hardware interrupt) or an internally-generated call to the operating system (i.e., a software interrupt).

  8. Interrupt Sequence When CPU receives an interrupt signal, it takes a specified action. Interrupt signals can cause a program to suspend itself temporarily to service the interrupt. When the interrupt has been addressed or processed, the computer’s attention can be returned to the process or program it was executing before the interrupt with the exact same conditionsprevailing.

  9. Sources of Interrupt • Internal fault (e.g. divide by zero, overflow) • Software • External hardware - maskable - non maskable • RESET

  10. When a hardware device needs the processor's attention, it simply sends an electrical signal (hardware interrupt) through a dedicated pin in the interrupt controller chip

  11. Hardware interrupts: every keystroke generates an interrupt signal. Interrupts can also be generated by other devices, such as a printer, to indicate that some event has occurred. • Software interrupts: Interrupt signals initiated by programs. Exceptions belong to a special type of software interrupts. They are generated by the processor itself whenever some unexpected critical event occurs. Three types of exceptions: faults, traps and aborts.

  12. Interrupt categories • Microcomputer  interrupts  fall  into  two  basic  categories: - maskable   and    - non-maskable.    • The   CPU   of   the microcomputer has interrupt signal line for each category of interrupt.

  13. Maskable Interrupt • External hardware interrupts are maskable interrupts. The interrupt request signal indicates the presence of one or more of these interrupts. • Maskable interrupts can be masked out or locked out for short periods of time by the software to allow the CPU to perform critical operations. The programmer is responsible for ensuring that interrupts are managed in a timely manner.

  14. Non-maskable Interrupt • Non-maskable  interrupts cannot  be  masked  out. They are used for conditions that require immediate attention by  the  microcomputer.   • Microprocessors sometimes have a special interrupt request input called a non-maskable interrupt request. Non-maskable interrupts are necessary when the interrupt is caused by a critical event that must not be missed; for example: interrupts from the internal hard disks, modems, fax cards, and sometimes out-of- tolerance condition. If this feature is available, a power out-of- tolerance condition will force the microcomputer to execute its save data program.

  15. The 68000 reserves its level 7 interrupt (IRQ7) as a non-maskable interrupt, because an interrupt on IRQ7 is always serviced by the 68000. • If a level 7 interrupt is currently being serviced by the 68000, a further active transition on IRQ7 (i.e., a high-to-low edge) results in the 68000 servicing the new level 7 interrupt. The 68000's interrupt structure

  16. 6.1.2.3 Direct Memory Access (DMA) • Direct Memory Access (DMA) is where a device is allowed to take over the main computer bus from the CPU and transfer bytes directly to main memory. • Normally the CPU would make a transfer from a device to main memory in a two step process: 1. reading a chunk of bytes from the peripheral device and putting these bytes into CPU 2. writing these bytes from the CPU to main memory

  17. With DMA it's a one step process of sending the bytes directly from the device to memory. • DMA provides the fastest possible means of transferring data between an interface and memory, as it requires no CPU overhead and leaves the CPU free to do useful work. • While DMA is going on, the CPU can't do too much since the main bus is being used by the DMA transfer. moves data between a peripheral and the CPU's memory without the direct intervention of the CPU itself

  18. Data transfer with a DMA controller

  19. DMA Operation • DMA works by grabbing the data and address buses from the CPU and using them to transfer data directly between the peripheral and memory. • During normal operation of the computer, bus switch 1 is closed, and bus switches 2 and 3 are open. The CPU controls the buses, providing an address on the address busand reading data from memory or writing data to memory via the data bus. • When a peripheral wishes to take part in an I/O transaction it asserts the TransferRequestinput of the DMA controller (DMAC).

  20. … cont’d • In turn, the DMA controller asserts DMArequestto request control of the buses from the CPU; that is the CPU is taken off-line. • When the CPU returns DMAgrant to the DMAC, a DMA transfer takes place. Bus switch 1 is opened and switches 2 and 3 closed. • The DMAC provides an address to the address bus and hence to the memory. At the same time, the DMAC provides a TransferGrant signal to the peripheral that is then able to write to, or read from, the memory directly. • When the DMA operation has been completed, the DMAC hands back control of the bus to the CPU.

  21. Flowchart for a DMA operation

  22. Many I/O devices cannot accept data at an arbitrary rate. For example: - a Pentium based PC is capable of sending several hundred million characters a second to a printer, but that printer is (probably) unable to print that many characters each second. - Likewise, an input device like a keyboard is unable to provide several million keystrokes per second (since it operates at human speeds, not computer speeds). The CPU needs some mechanism to coordinate data transfer between the computer system and its peripheral devices. 6.1.3 Handshaking

  23. One common way to coordinate data transfer is to provide some status bits. • Using status bits to indicate that a device is ready to accept or transmit data is known as handshaking

  24. Initially, the computer makes the data available and then asserts data DAV to indicate that the data is valid. • The peripheral receiving the data sees that DAV has been asserted, indicating that new data is ready. • The peripheral asserts its acknowledgement, DAC (data accepted) and reads the data. The data accepted signal is a reply to the computer informing it that the data has been accepted. • Once the data has been read by the peripheral, the DAV and DAC signals may be negated and the data removed. This sequence of events is known ashandshaking.

  25. 6.2 Interface Content: • Definition • Concept of interfacing • Serial and parallel data transmission techniques • RS232 standard • A/D and D/A Converters • Interface chips (serial & parallel)

  26. 6.2.1 Definition • I/O Interface is required whenever the I/O device is driven by the processor. • An interface is an assembly   of   electronic   circuits   that   make the computer compatible with the peripheral units. This compatibility permits the computer and the peripheral units  to  communicate  intelligently.  The  compatibility involves logic levels, timing or speed, and control.

  27. … cont’d 1. When  digital  data  is  transmitted  between  two units,  the  binary  voltage  or  current  levels  must  be compatible.  Logic-level conversion  is  often  required to properly interface different types of logic circuits. For example, logic-level shifting is often required to properly  interface  bipolar  and  MOS  circuits. 2. The speed  of  the  data  transmission  must  also  be compatible. Some type of temporary storage between the two units may be required as a buffer to match the high-speed  CPU  to  a  low-speed  peripheral  unit

  28. 3. Control   is   another   function   of   the   interface. There  are  status  lines  that  tell  when  the  computeror peripheral unit is ready or busy, and strobe lines that actually  initiate  the  data  transfers.  This  process  is often  referred  to  as  “handshaking.” The type of information exchanged between the I/O  unit  and  the  peripheral  devices  includes  data, addressing,  and  control  signals. In some computers,  peripheral  units  are  addressed  as  storage locations, and all memory reference instructions can be used in performing I/O operations. No special I/O instructions are used in these computers

  29. Relationship between a computer and a peripheral • The peripheral interface chip looks just like a memory location to the CPU (i.e. read or write data to it). However, this interface chip must have necessary logic to interpret the device address generated by the processor. that allows it to communicate with the peripheral.

  30. Method of transmitting digital data • There  are  two  methods  of  transmitting   digital data :    - parallel   and   - serial transmissions. • Microprocessors are by nature parallel machines. They transmit/receive data in parallel bits (8,16,32,64). It is required sometimes to send the data serially.

  31. Parallel data transmission all bits of the binary data are transmitted simultaneously. For example,  to  transmit  an  8 – bit  binary  number  in parallel from one unit to another, eight transmission lines  are  required.  Each  bit  requires  its  own  separate data path. All bits of a word are transmitted at the same time.

  32. … cont’d • This method of transmission can move a significant amount of data in a given period of time. Its   disadvantage   is   the   large   number   of interconnecting  cables  between  the  two  units.  For large  binary  words,  cabling  becomes  complex  and expensive.  This  is  particularly  true  if  the  distance between the two units is great. Long multiwire cables are  not  only  expensive,  but  also  require  special interfacing   to   minimize   noise   and   distortion problems. • Examples: connections between a computer and a printer (Most printers are within 6 meters or 20 feet).

  33. Serial data transmission • Serial   data   transmission   is   the   process   of transmitting binary words a bit at a time. Since the bits time-share the transmission medium, only one interconnecting  lead  is  required • While serial data transmission is much simpler and  less  expensive  because  of  the  use  of  a  single interconnecting line, it is a very slow method of data transmission.

  34. … cont’d • Serial  data  transmission  is  useful  in systems where high speed is not a requirement. Serial data  transmission  techniques  are  widely  used  in transmitting  data  between  a  computer  and  its peripheral  units. • While  the  computer  operates  at  very high speeds, most peripheral units are slow because of their  electromechanical  nature.  Slower  serial  data transmission is more compatible with such devices. • Since the speed of serial transmission is more than adequate in such units, the advantages of low cost and simplicity of the signal interconnecting line can be obtained.

  35. Differential between Serial & Parallel data transmission

  36. Synchronous Communication (synchronised transmit & receive clocks) • There are two methods for serial communication: - Synchronous & - Asynchronous. • In Synchronous serial communication the receiver must know when to “read” the next bit coming from the sender, this can be achieved by sharing a clock between sender and receiver.

  37. … cont’d • In most forms of serial Synchronous communication, if there is no data available at a given time to transmit, a fill character will be sent instead so that data is always being transmitted. • Synchronous communication is usually more efficient because onlydata bits are transmitted between sender and receiver, however it will be more costly because extra wiring and control circuits are required to share a clock signal between the sender and receiver. • More complex interface (high data rates supported up to ~ 10 Gbps) • Used for: Connections between computer and telephony networks

  38. Asynchronous Communication (independent transmit & receive clocks) • Simple interface (limited data rate, typically < 64 kbps) • No clock sent (Tx & Rx have own clocks) Asynchronous transmission allows data to be transmitted without the sender having to send a clock signal to the receiver. • Instead, special bits will be added to each word in order to synchronize the sending and receiving of the data. • Used for connecting: Printer, Terminal, Modem, home connections to the Internet

  39. Asynchronous serial communication characterictics • Serial communication requires the following four parameters: The baud rate of the transmission The number of data bits encoding a character The sense of the optional parity bit The number of stop bits • Baud rateis a measure of how fast data are moving between instruments that use serial communication. The baud rate is identical to the maximum number of bits of information, including control bits, that are transmitted per second.

  40. When a word is given to the UART for Asynchronous transmissions, a bit called the "Start Bit" is added to the beginning of each word that is to be transmitted. The Start Bitis used to alert the receiver that a word of data is about to be sent, and to force the clock in the receiver into synchronization with the clock in the transmitter. • After the Start Bit, the individual bits of the wordof data are sent, each bit in the word is transmitted for exactly the same amount of time as all of the other bits

  41. When the entire data word has been sent, the transmitter may add a Parity Bitthat the transmitter generates. The Parity Bit may be used by the receiver to perform simple error checking. Then at least one Stop Bitis sent by the transmitter. If the Stop Bit does not appear when it is supposed to, the UART considers the entire word to be garbled and will report a Framing Error. … cont’d

  42. Example of serial data transmission Each transmitted character is packaged in a character frame that consists of a single start bit followed by the data bits, the optional parity bit, and the stop bit or bits. *** The standard serial communications hardware in the PC does not support Synchronous operations.

  43. RS 232 Standard • There are many different recommended standards of serial port communication, including the following most common type: RS-232, RS-449, RS-422, RS-423 • RS-232 (Recommended Standard 232) is a standard for serial binary single-endeddata and control signals connecting between a DTE (Data Terminal Equipment) and a DCE (Data Circuit-terminating Equipment). • It is commonly used in computerserial ports. • RS-232-compatible port was a standard feature for serial communications, such as modem connections, on many computers.

  44. … cont’d • The RS-232 standard includes electrical signal characteristics (voltage levels), interface mechanical characteristics (connectors), functional description of interchange circuits (the function of each electrical signal), and some recipes for common kinds of terminal-to-modem connections. • The most frequently encountered revision of this standard is called RS-232C. • In personal computer peripherals it has largely been supplanted by other interface standards, such as USB.

  45. RS 232C connector Devices that use serial cables for their communication are split into two categories. These are DCE and DTE. DCE are devices such as a modem, TA adapter, plotter, and so on, while DTE is a computer or terminal. RS-232 serial ports come in two sizes, the D-Type 25-pin connector and the D-Type 9-pin connector.

  46. RS 232C connector – DE9 The connector on the PC has male pins, therefore the cable needs to terminate in a DE9/F (Female pin) connector.

  47. RS 232C connector– DB25 The DB-25 connector is the standard RS-232 connector, with enough pins to cover all the signals specified in the standard. Table shows only the core set of pins that are used for most RS-232 interfaces.

  48. RS- 232 Interface

  49. Function of RS 232C connector The RS-232C standard defines a set of rules to provide for the orderly exchange of data in a serial bit-stream. It also defines signals to allow the connected devices to tell each other when they are ready to send or receive data. These signals are called flow-control or 'handshake' signals.

  50. Analog and Digital Converter

More Related