1 / 53

Nut Handling and Processing for Confectioners and Small Nut Roasters

Nut Handling and Processing for Confectioners and Small Nut Roasters. Sponsored by:. Session 4: Role of Food Safety Programs in Assuring Safe Use of Nuts Tom Mackie, Food Safety Consultant to NCA Steve Calhoun, Food Safety Consultant to APC. In partnership with:.

emily
Download Presentation

Nut Handling and Processing for Confectioners and Small Nut Roasters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Nut Handling and Processingfor Confectioners and Small Nut Roasters Sponsored by: Session 4: Role of Food Safety Programs in Assuring Safe Use of Nuts Tom Mackie, Food Safety Consultant to NCA Steve Calhoun, Food Safety Consultant to APC In partnership with:

  2. Nut Handling & Processing for Confectioners and Small Nut Processors Role of Food Safety Programs in Assuring Safe Use of Nuts Steve Calhoun and Tom Mackie

  3. Challenges for Nut and Confectionery Processors • Handling contaminated raw commodities • Old facilities with poor traffic flow • Poor equipment design making it difficult to clean and inspect • Lack of trained and dedicated resources • Use of contract and temporary labor pool • Reliance on co-manufacturers for critical process steps • Low level of technology for quality and food safety systems support • Change management to keep up with pressure for new product and new package development

  4. Prerequisite Programs • Regulatory Proposals • PRP Overview • Facilities , Personnel , Equipment • Control of Raw Materials • Sanitation & Environmental Monitoring • Traceability and Recall • SSOPs and Process & Controls

  5. PRP Implementation • Microbiological Control • Hazard Analysis • Chemical , Allergen & Physical Hazards • Documentation • Training • Verification • HACCP

  6. Proposed Changes to Food Safety Regulations • Substantially increase regulatory burden, cost, and liability risks • Increase frequency of food facility inspections • Expanded access to company records and test results • Mandated food recalls • Written HACCP type plans • Enhanced Traceability requirements • Third party accreditation to food safety standards

  7. PrerequisitePrograms • A range of programs that are necessary to set the stage for HACCP-based systems and to provide on-going support for these systems.

  8. Prerequisite Programs Based on: • FDA current Good Manufacturing Practices (cGMPs) • USDA/FSIS sanitation regulations

  9. Prerequisite Programs • Provide the basic environmental and operating conditions that are necessary for the production of safe, wholesome foods.

  10. Facilities design Production equipment controls Cleaning & sanitation Chemical control Pest control Personal hygiene Training Supplier assurance Specifications Traceability & recall Examples of Common Prerequisite Programs

  11. Examples of Prerequisite Programs • Consumer complaint management • Sanitation Standard Operating Procedures (SSOPs) • Environmental monitoring program

  12. Facilities • Layout • Buildings, premises, equipment, and personnel movements • Segregation • Clean and unclean zones • Wet and dry zones • Air handling

  13. Facilities • Separation of raw from processed including air flow • Special attention to roof • Master Sanitation Schedule • Use of dry cleaning procedure as routine for risk areas • Dry, Dry, Dry • Nut residue accumulation removed as timely as possible • Integrated pest control management

  14. Personnel • Health and hygiene • Disease control and personal hygiene/dress code • Hygienic practices • Handling of materials • Movement in facility • Education and Training

  15. Personnel Practices • Should apply equally to contract employees • Cross contamination prevention, limit traffic between raw nut and processed nut area

  16. Poor employee practices may result in microbiological, physical or chemical contamination of foods.

  17. Production Equipment • Sanitary design principles • Scheduled maintenance • Calibration, where applicable • Monitoring activities

  18. Sanitary Design Figure 3-1. Ends of a horizontal screw conveyor – always a potential area of stagnant product build-up.

  19. Sanitary Design Figure 3-2. A flat surface that can collect product (This should be eliminated or sloped).

  20. Equipment • Cold storage equipment monitored • Raw Peanuts 1-5oC (34-41oF) • 55-70% Relative Humidity

  21. Inbound Material Control • Documented Specifications • Certificates of Analysis / Conformance • Letters of Guaranty • Supplier approval program • Inbound material inspection • Material receiving procedures • Management of material storage

  22. Supplier Assurance • Document a material management program for all ingredients and packaging • Conduct risk assessments for materials • Decide which materials present the greatest risk to the business • Determine how to audit suppliers • Build strong relationships to enable regular communication with suppliers

  23. Supplier Audits • Who conducts the audits ? • Make sure the auditor is trained • Provide documentation of the audit • How frequently should a supplier be audited ? • Make sure the supplier is clear on all specifications and expectations • Follow up on all recommendations and required corrective actions • Assure the vendor provides timely notification of all changes to material , facilities , or process

  24. Specifications • Spec.’s are documented , contractual requirements • All critical food safety parameters must be included • For nut materials these will include microbiological , aflatoxin and allergens • All special handling requirements need to be documented in the spec. • Assure spec.’s are controlled documents

  25. Specification Categories Moisture Microbiological ; bacteria , molds Rodent or insect evidence Foreign Materials ; shell , twigs/wood, metal Chemicals ; aflatoxin , pesticides Allergens Sensory ; color , flavor Nut Quality ; size , broken pieces , damage

  26. Microbiological Limits • USDA Commodity Micro Requirements for Peanut Butter

  27. Material Receiving & Storage • Material receiving procedures such as checks for seals ; COAs and sampling • Dock space and material protection • Bulk unloading and handling equipment • Isolation of raw commodities • Control of allergen cross contact potential • Warehouse space and conditions • Handling of non-conforming materials

  28. Nut Processors • Crop sources • Harvest conditions • Storage conditions • Shelf life impact • Lab capabilities ; micro, chemical ,aflatoxin • Allergen cross contact at shellers • Intermediate handlers / co-processors

  29. Confectioners • Nut supplier locations • Packaging used for nut ingredients • Shipping and handling prior to delivery • Receiving practices at your sites • Product turnover during processing • Intermediate products and rework

  30. Environmental Sanitation • Know the facility layout ; wet and dry areas • Dedicated tools and cleaning equipment • Lean manufacturing approach • Control traffic patterns throughout the process facility ; raw product containment is critical • Rely upon documented cleaning and sanitation schedules and procedures • Use product contact surface sampling to verify sanitation effectiveness • Use environmental swab testing for pathogens

  31. Equipment Cleaning and Sanitation • Dry cleaning in nut and confectionery processes • Continuous operations and shut down periods • Wet clean systems such as CIP and COP • Focused wet cleaning of equipment • Product build – up and biofilms • Access to clean and to inspect the job • Application of sanitizers • Swab tests and bioluminescence / ATP kits • Impact of GMPs and personal hygiene

  32. Environmental Swab Program • Where and how to sample using sponges • Frequency of swab sampling • How to react to a positive pathogen result • Control reporting and communications • Confirm external lab credibility • Expect programs to be implemented at suppliers and co-processors

  33. Product Testing • Product contact surface sampling protocols • Raw materials monitoring • Intermediate ingredients • Rework • Finished product composites • Composite breakdowns • Resampling and retesting • Returned product and retained samples • Strong hold management system

  34. Traceability and Recall Program • Crisis response plan and team • Lot coding and records • Distribution records • Product disposition • Mock recalls • FDA regulation (21 CFR 1) • Requires records identifying immediate previous source and immediate subsequent recipient

  35. SanitationRegulatory Requirements • FDA – Current Good Manufacturing Practices (21 CFR 110) • SSOPs

  36. SSOPs • Should identify daily pre-op procedures • Should identify daily operational procedures • Should be signed and dated • Establishment should initiate corrective and preventative actions • Daily records should be maintained

  37. Process and Controls • Validate kill step • Do not use same equipment (conveyors, containers, etc.) for unprocessed and processed, including blanched nuts • Process disruptions – remove product • Control nut dust and other nut debris • Assure nut foreign material removed

  38. Process and Controls • If a processed product sample tests positive for Salmonella, the tested lot is considered adulterated and should not be released into commerce • Positive lots may be reprocessed , but ONLY when run through a VALIDATED process • It is critical to review adjacent lots to confirm a clean break between a positive lot and one or more lots designated as clear to release

  39. Process and Controls • Purging contaminated peanut butter lines with hot oil • Validate procedure • Recent study suggests it takes 42+/- 8 minutes at 90oC (194oF) for a 5 log reduction of Salmonella for a mixture of three outbreak-associated S. Tennessee strains in peanut butter (Doyle, May , 2009) • 49±12 min were needed to inactivate a composite of other Salmonella isolates

  40. Process and Controls • Traceability • Finished product traceable to raw material lots used • Consideration should be given for a routine clean break for bulk or continuous nut and nut butter operations

  41. Microbiological Control GMA Guidance Document • Prevention • Hygiene Practices and Control • Hygiene Design of Buildings and Equipment • Moisture Control, Minimizing growth, Dry & Wet Cleaning Practices • Raw Material Programs • Validation of Control • Verification of Controls & Corrective Actions www.gmaonline.org/science/SalmonellaControlGuidance.pdf

  42. Chemical and Physical Hazards • Aflatoxin and other Mycotoxins • Pesticide Residues • Heavy Metals • Unintended Food Allergens • Foreign Materials

  43. Proper implementation of prerequisite programs simplifies the development of a HACCP Plan.

  44. Prerequisite Programs Should Be : • Well-documented with written SOPs • Adhered to by all employees • Reviewed and revised as needed • Effective in accomplishing objectives

  45. Establishing Prerequisite Programs • Documentation • What procedures should be performed? • At what frequency? • Who has responsibility? • What actions should be taken if: • a procedure is not performed as required? • there is an unexpected outcome?

  46. Establishing Prerequisite Programs • Employee training • Continuing education • Important to understand and follow assigned tasks • Provide time and materials for training • Verify by reviewing performance

  47. Verification of Prerequisite Programs • Periodic review of the SOPs and audit reports to ensure that the programs are operating in a manner that should not require a change in the hazard analysis or HACCP plan.

  48. Establishing Prerequisite Programs Verification • Is the SOP performed in the manner intended? • Is the procedure monitored? • Are appropriate records kept? • Is there an independent audit? • Are programs revised as necessary?

  49. Establishing Prerequisite Programs • Resources • Are the proper tools/equipment available? • Are appropriate personnel available to perform the task effectively? • Are systems adequate for monitoring and storing data?

  50. Prerequisite Program or HACCP?

More Related