1 / 12

Practical Applications and Calculation Methods

12. Practical Applications and Calculation Methods. Calculate position tolerances when more than two parts are stacked in a floating fastener or fixed fastener application. Distribute the total available position tolerance between features to which position tolerances are applied.

elyse
Download Presentation

Practical Applications and Calculation Methods

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 12 Practical Applications and Calculation Methods

  2. Calculate position tolerances when more than two parts are stacked in a floating fastener or fixed fastener application. • Distribute the total available position tolerance between features to which position tolerances are applied. • Specify projected tolerance zones for fixed feature locations to prevent interference conditions. • Determine the amount of tolerance accumulation in a simple assembly.

  3. Properly use zero position tolerances at MMC to increase manufacturing freedom. • Apply paper gaging techniques to determine if a produced part meets drawing requirements.

  4. Floating Fastener Condition—Two Stacked Parts

  5. Floating Fastener Condition—Three Stacked Parts

  6. Floating Fastener Condition— Two Hole Sizes & Distributed Tolerances

  7. Fixed Fastener Condition—Two Stacked Parts

  8. Fixed Fastener Condition—Two Parts, Unevenly Distributed Tolerances

  9. Fixed Fastener Condition—Projected Tolerance Zone

  10. Zero Position Tolerance at MMC • Zero tolerancing at MMC increases manufacturing freedom • Clearance conditions must exist • Located feature must have a size tolerance • Lets the manufacturer choose how to allocate the tolerances

  11. Zero Position Tolerance at MMC Application

  12. Paper Gaging Techniques • Measure hole locations relative to datum reference frame • Calculate coordinate variations • Calculate diameter position variations • Plot coordinate variation values

More Related