1 / 9

Automated Refuelling Station

Automated Refuelling Station. Team FuelBot. Introduction. Purpose – to design an automated refuelling station for elderly and disabled persons Working alongside Sigjaws Charitable Trust to create a solution to on-going service station issues

ellery
Download Presentation

Automated Refuelling Station

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Automated Refuelling Station Team FuelBot

  2. Introduction Purpose – to design an automated refuelling station for elderly and disabled persons Working alongside Sigjaws Charitable Trust to create a solution to on-going service station issues The automated refuelling station should perform all necessary tasks for the user to refill their vehicle

  3. Scope and Deliverables Design and construction of a robotic end effector Development of software to control the motion path of the robot Development of a vision system Construction of a test rig for analysis Technical engineering report

  4. Workstreams Phase 1: Project Proposal Phase 2: Mechanical Design Phase 3: Software Design Phase 4: System Integration Phase 5: Review

  5. Phase 1: Project Proposal Phase 2: Mechanical Design Phase 3: Software Design Phase 4: System Integration Phase 5: Review Current Status • Developed proposal for Sigjaws • Main Outline • Detect and open fuel flap • Remove cap if necessary • Grasp fuel nozzle • Insert nozzle into vehicle

  6. Phase 1: Project Proposal Phase 2: Mechanical Design Phase 3: Software Design Phase 4: System Integration Phase 5: Review Current Status Fuel Flap Opener Fuel Cap Opener Fuel Nozzle Gripper Stereo Vision Industrial Robotic Arm

  7. Phase 1: Project Proposal Phase 2: Mechanical Design Phase 3: Software Design Phase 4: System Integration Phase 5: Review Future Work • Phase 3: Software Design • - Mount end effector on robot • - Motion paths for • - Opening flap • - Picking up nozzle • - Filling Car 18th July - 27th August

  8. Phase 1: Project Proposal Phase 2: Mechanical Design Phase 3: Software Design Phase 4: System Integration Phase 5: Review Future Work Phase 4: System Integration - Integrate computer vision 14th August – 9th September Phase 5: Review -Evaluation and Testing 28th August – 14th October Future Costs

  9. Conclusion

More Related