1 / 7

Proposal

Proposal. Start with ultimate goal Helps me focus Gives me motivation Why interested in ferroelectric nanodots ? Possibility of increasing density 5 times greater than today’s capabilities Never before experimentally seen vortex state Never been grown before using MBE Device possibility

easter
Download Presentation

Proposal

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Proposal • Start with ultimate goal • Helps me focus • Gives me motivation • Why interested in ferroelectric nanodots? • Possibility of increasing density 5 times greater than today’s capabilities • Never before experimentally seen vortex state • Never been grown before using MBE • Device possibility • Good selling point for industry

  2. Proposal • Next steps… • Major points of outline • Uncertainties and gaps in knowledge • How to develop reasonable ideas to test? • What is or isn’t reasonable to put forth? • How do I make sure that I make this my own ideas? • Salamo – grow the MBE dots • Didn’t tell me how • Zhao has helped considerablly • Bellaiche – theoretically shows what I want to see

  3. MBE Growth Training • Do I have to push all the buttons to claim I grew something? • Execution vs idea • Learning MBE is difficult • Want to be able to do it on my own • Each step seems relatively easy, and I get bored of doing it over and over • However, if I’m not there, it’s like I don’t gain trust of Zhao • Don’t want to waste time

  4. MBE Upgrades • Lambda-Eurotherm Cables • Important connection that needs to be reliable; otherwise if we loose control in the middle of growth • Vampire connection • Small contact area • Strain relief should keep it in place • Don’t like it; seems too flimsy • Cannibilize 25pin premade serial cables • How to decide which to use? • Dave agreed with me • Wanted to ask Dick

  5. MBE Upgrades • Lambda-Eurothermtest • What is safe? • Power supplies don’t have a load on them • What should I be concerned about? • Dave thinks it okay just to increase temp on eurotherm and see if lambda increases power • Could hook up wire to degas module • What I would opt for as it seems safest since it’s how it would be really used

  6. XPS Evaluation • MgO • Correlate surface roughness to composition • Need to know percentages of each element I detect • Obtaining only surface is still important • That is what we grow on and affects growth

  7. LAO • According to Tchakhalian, can’t be made atomically flat • “because of its R3C symmetry resulting in numerous macro twins (domains) seen on the surface even by naked eye” • Don’t know what R3C symmetry is • Could easily validate this by looking • Does this invalidate a buffer layer approach • Get the feeling that this is an intrinsic property of the material • Do I have to have atomically flat for dot formation? • Chemical etching results in creating a set of grooves of various orientations in twins

More Related