1 / 162

Semiconductor Devices T.Y.B.Sc (Electronics) S. M. Joshi College Hadapsar28 Prof. Kanaskar S.S

Semiconductor Devices T.Y.B.Sc (Electronics) S. M. Joshi College Hadapsar28 Prof. Kanaskar S.S. Objectives. Discuss basic operation of a diode. Discuss the basic structure of atoms. Discuss properties of insulators, conductors, and semiconductors. Discuss covalent bonding.

earnshaw
Download Presentation

Semiconductor Devices T.Y.B.Sc (Electronics) S. M. Joshi College Hadapsar28 Prof. Kanaskar S.S

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Semiconductor DevicesT.Y.B.Sc (Electronics) S. M. Joshi College Hadapsar28Prof. Kanaskar S.S

  2. Objectives • Discuss basic operation of a diode • Discuss the basic structure of atoms • Discuss properties of insulators, conductors, and semiconductors • Discuss covalent bonding • Describe the properties of both p and n type materials • Discuss both forward and reverse biasing of a p-n junction

  3. Introduction The basic function of a diode is to restrict current flow to one direction. Forward bias Current flows Reverse Bias No current flows

  4. Bohr model of an atom As seen in this model, electrons circle the nucleus. Atomic structure of a material determines its ability to conduct or insulate.

  5. Conductors, Insulators, and Semiconductors • The ability of a material to conduct current is based on its atomic structure. • The orbit paths of the electrons surrounding the nucleus are called shells. • Each shell has a defined number of electrons it will hold. This is a fact of nature and can be determined by the formula, 2n2. • The outer shell is called the valence shell. • The less complete a shell is filled to capacity the more conductive the material is.

  6. Conductors, Insulators, and Semiconductors The valence shell determines the ability of material to conduct current. A Copper atom has only 1 electron in its valence ring. This makes it a good conductor. It takes 2n2 electrons or in this case 32 electrons to fill the valence shell. A Silicon atom has 4 electrons in its valence ring. This makes it a semiconductor. It takes 2n2 electrons or in this case or 18 electrons to fill the valence shell.

  7. Covalent Bonding Covalent bonding is a bonding of two or more atoms by the interaction of their valence electrons.

  8. Covalent Bonding Certain atoms will combine in this way to form a crystal structure. Silicon and Germanium atoms combine in this way in their intrinsic or pure state.

  9. N-type and P-type Semiconductors The process of creating N- and P-type materials is called doping. Other atoms with 5 electrons such as Antimony are added to Silicon to increase the free electrons. Other atoms with 3 electrons such as Boron are added to Silicon to create a deficiency of electrons or hole charges. N-type P-type

  10. The Depletion Region This creates the depletion region and has a barrier potential. This potential cannot be measured with a voltmeter but it will cause a small voltage drop. With the formation of the p and n materials combination of electrons and holes at the junction takes place.

  11. Forward and Reverse Bias Forward Bias Reverse Bias Voltage source or bias connections are + to the p material and – to the n material. Bias must be greater than .3 V for Germanium or .7 V for Silicon diodes. The depletion region narrows. Voltage source or bias connections are – to the p material and + to the n material. Bias must be less than the breakdown voltage. Current flow is negligible in most cases. The depletion region widens.

  12. Forward Bias Measurements With Small Voltage Applied In this case with the voltage applied is less than the barrier potential so the diode for all practical purposes is still in a non-conducting state. Current is very small.

  13. Forward Bias Measurements With Applied Voltage Greater Than the Barrier Voltage. With the applied voltage exceeding the barrier potential the now fully forward-biased diode conducts. Note that the only practical loss is the .7 Volts dropped across the diode.

  14. Ideal Diode Characteristic Curve In this characteristic curve we do not consider the voltage drop or the resistive properties. Current flow proportionally increases with voltage.

  15. Practical Diode Characteristic Curve In most cases we consider only the forward bias voltage drop of a diode. Once this voltage is overcome the current increases proportionally with voltage.This drop is particularly important to consider in low voltage applications.

  16. Complex Characteristic Curve of a Diode The voltage drop is not the only loss of a diode. In some cases we must take into account other factors such as the resistive effects as well as reverse breakdown.

  17. Troubleshooting Diodes Testing a diode is quite simple, particularly if the multimeter used has a diode check function. With the diode check function a specific known voltage is applied from the meter across the diode. With the diode check function a good diode will show approximately .7 V or .3 V when forward biased. When checking in reverse bias the full applied testing voltage will be seen on the display. Note some meters show an infinite (blinking) display.

  18. Troubleshooting Diodes An ohmmeter can be used to check the forward and reverse resistance of a diode if the ohmmeter has enough voltage to force the diode into conduction. Of course, in forward- biased connection, low resistance will be seen and in reverse-biased connection high resistance will be seen.

  19. Troubleshooting Diodes Open Diode In the case of an open diode no current flows in either direction which is indicated by the full checking voltage with the diode check function or high resistance using an ohmmeter in both forward and reverse connections. Shorted Diode In the case of a shorted diode maximum current flows indicated by a 0 V with the diode check function or low resistance with an ohmmeter in both forward and reverse connections.

  20. Diode Packages Diodes come in a variety of sizes and shapes. The design and structure is determined by what type of circuit they will be used in.

  21. Summary • Diodes, transistors, and integrated circuits are all made of semiconductor material. • P-materials are doped with trivalent impurities • N-materials are doped with pentavalent impurities. • P and N type materials are joined together to form a PN junction. • A diode is nothing more than a PN junction. • At the junction a depletion region is formed. This creates barrier that requires approximately .3 V for a Germanium and .7 V for Silicon for conduction to take place.

  22. Summary • A diode conducts when forward-biased and does not conduct when reverse biased. • When reversed-biased, a diode can only withstand so much applied voltage. The voltage at which avalanche current occurs is called reverse breakdown voltage. • There are three ways of analyzing a diode. These are ideal, practical, and complex. Typically we use a practical diode model.

  23. Chapter 2Diode Applications

  24. Objectives • Explain and analyze the operation of both half and full wave rectifiers • Explain and analyze filters and regulators and their characteristics • Explain and analyze the operation of diode limiting and clamping circuits • Explain and analyze the operation of diode voltage multipliers • Interpret and use a diode data sheet • Troubleshoot simple diode circuits

  25. Introduction The basic function of a DC power supply is to convert an AC voltage to a smooth DC voltage.

  26. Half Wave Rectifier A half wave rectifier(ideal) allows conduction for only 180° or half of a complete cycle. The output frequency is the same as the input. The average VDC or VAVG = Vp/

  27. Half Wave Rectifier Peak inverse voltage is the maximum voltage across the diode when it is in reverse bias. The diode must be capable of withstanding this amount of voltage.

  28. Transformer-Coupled Input Transformers are often used for voltage change and isolation. The turns ratio of the primary to secondary determines the output versus the input. The fact that there is no direct connection between the primary and secondary windings prevents shock hazards in the secondary circuit.

  29. Full-Wave Rectifier A full-wave rectifier allows current to flow during both the positive and negative half cycles or the full 360º. Note that the output frequency is twice the input frequency. The average VDC or VAVG = 2Vp/.

  30. Full-Wave RectifierCenter-Tapped This method of rectification employs two diodes connected to a center-tapped transformer. The peak output is only half of the transformer’s peak secondary voltage.

  31. Full-Wave Center Tapped Note the current flow direction during both alternations. Being that it is center tapped, the peak output is about half of the secondary windings total voltage. Each diode is subjected to a PIV of the full secondary winding output minus one diode voltage drop. PIV=2Vp(out) +0.7V

  32. The Full-Wave Bridge Rectifier The full-wave bridge rectifier takes advantage of the full output of the secondary winding. It employs four diodes arranged such that current flows in the same direction through the load during each half of the cycle.

  33. The Full-Wave Bridge Rectifier The PIV for a bridge rectifier is approximately half the PIV for a center-tapped rectifier. PIV=Vp(out) +0.7V Note that in most cases we take the diode drop into account.

  34. Power Supply Filters And Regulators As we have seen, the output of a rectifier is a pulsating DC. With filtration and regulation this pulsating voltage can be smoothed out and kept to a steady value.

  35. Power Supply Filters And Regulators A capacitor-input filter will charge and discharge such that it fills in the “gaps” between each peak. This reduces variations of voltage. The remaining voltage variation is called ripple voltage.

  36. Power Supply Filters And Regulators The advantage of a full-wave rectifier over a half-wave is quite clear. The capacitor can more effectively reduce the ripple when the time between peaks is shorter.

  37. Power Supply Filters And Regulators Being that the capacitor appears as a short during the initial charging, the current through the diodes can momentarily be quite high. To reduce risk of damaging the diodes, a surge current limiting resistor is placed in series with the filter and load.

  38. Power Supply Filters And Regulators Regulation is the last step in eliminating the remaining ripple and maintaining the output voltage to a specific value. Typically this regulation is performed by an integrated circuit regulator. There are many different types used based on the voltage and current requirements.

  39. Power Supply Filters And Regulators How well the regulation is performed by a regulator is measured by it’s regulation percentage. There are two types of regulation, line and load. Line and load regulation percentage is simply a ratio of change in voltage (line) or current (load) stated as a percentage. Line Regulation = (VOUT/VIN)100% Load Regulation = (VNL – VFL)/VFL)100%

  40. Diode Limiters Limiting circuits limit the positive or negative amount of an input voltage to a specific value. This positive limiter will limit the output to VBIAS + .7V

  41. Diode Limiters The desired amount of limitation can be attained by a power supply or voltage divider. The amount clipped can be adjusted with different levels of VBIAS. This positive limiter will limit the output to VBIAS + .7V The voltage divider provides the VBIAS . VBIAS =(R3/R2+R3)VSUPPLY

  42. Diode Clampers A diode clamper adds a DC level to an AC voltage. The capacitor charges to the peak of the supply minus the diode drop. Once charged, the capacitor acts like a battery in series with the input voltage. The AC voltage will “ride” along with the DC voltage. The polarity arrangement of the diode determines whether the DC voltage is negative or positive.

  43. Voltage Multipliers Clamping action can be used to increase peak rectified voltage. Once C1 and C2 charges to the peak voltage they act like two batteries in series, effectively doubling the voltage output. The current capacity for voltage multipliers is low.

  44. Voltage Multipliers The full-wave voltage doubler arrangement of diodes and capacitors takes advantage of both positive and negative peaks to charge the capacitors giving it more current capacity. Voltage triplers and quadruplers utilize three and four diode-capacitor arrangements respectively.

  45. The Diode Data Sheet The data sheet for diodes and other devices gives detailed information about specific characteristics such as the various maximum current and voltage ratings, temperature range, and voltage versus current curves. It is sometimes a very valuable piece of information, even for a technician. There are cases when you might have to select a replacement diode when the type of diode needed may no longer be available.

  46. Troubleshooting Our study of these devices and how they work leads more effective troubleshooting. Efficient troubleshooting requires us to take logical steps in sequence. Knowing how a device, circuit, or system works when operating properly must be known before any attempts are made to troubleshoot. The symptoms shown by a defective device often point directly to the point of failure. There are many different methods for troubleshooting. We will discuss a few.

  47. Troubleshooting Here are some helpful troubleshooting techniques: • Power Check: Sometimes the obvious eludes the most proficient troubleshooters. Check for fuses blown, power cords plugged in, and correct battery placement. • Sensory Check: What you see or smell may lead you directly to the failure or to a symptom of a failure. • Component Replacement: Educated guesswork in replacing components is sometimes effective.

  48. Troubleshooting Signal tracing is the most popular and most accurate. We look at signals or voltages through a complete circuit or system to identify the point of failure. This method requires more thorough knowledge of the circuit and what things should look like at the different points throughout.

  49. Troubleshooting This is just one example of troubleshooting that illustrates the effect of an open diode in this half-wave rectifier circuit. Imagine what the effect would be if the diode were shorted.

  50. Troubleshooting This gives us an idea of what would be seen in the case of an open diode in a full-wave rectifier. Note the ripple frequency is now half of what it was normally. Imagine the effects of a shorted diode.

More Related