1 / 10

13 : Omni-Directional Robot Mid-term Presentation

13 : Omni-Directional Robot Mid-term Presentation. Ben Wolf Brent Cornelius Ed Cramer John Grabner James Grabner Advisor & Client: Dr. Nicola Elia. October 6, 2011. Conceptual Diagram. Project Goal. Repair/clean up existing robot platform Finish unimplemented features

dyanne
Download Presentation

13 : Omni-Directional Robot Mid-term Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 13 : Omni-Directional RobotMid-term Presentation Ben Wolf Brent Cornelius Ed Cramer John Grabner James Grabner Advisor & Client: Dr. Nicola Elia October 6, 2011

  2. Conceptual Diagram

  3. Project Goal • Repair/clean up existing robot platform • Finish unimplemented features • OS on Flash Card, reduced boot time • I/O board and IMU • BPAM(battery protection and monitoring) • Adapter Board(to pass through pin header for I/O board cable and help clean up chassis) • Document robot design and operation

  4. Current Progress • OS - basic functions complete, experimenting with compressed file systems • BPAM - Layout complete, parts ordered • Adapter board - removed offset connector and replace with ribbon cable • I/O board - Purchased and tested for compatibility

  5. BPAM Layout

  6. I/O Board Cable Test • The PCM-MIO-G is tolerant of ‘irregular’ wiring • Reduces complexity and cost of the adapter board

  7. What we need to do • OS • Add SquashFS to the kernel, compress root partition • Integrate I/O board with the sensor management interface • BPAM • Program microcontroller • Make PCB and install components • Adapter Board • Make PCB layout • Make PCB and install components • IMU • Purchase new IMU, mount to chassis, evaluate performance • Tests & Documentation

  8. Success Criteria • OS • BPAM • Adapter board • Chasis Optimization • IMU • I/O

  9. Success Criteria • Major components will be completed • Detailed analysis of results may suffer • Issues • Large learning curve for project • Documentation for previous robots is sparse • Difficult to test robot performance without reliable wheels • Legacy requirements negatively affect new designs

  10. Questions ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

More Related