1 / 22

Advanced Laser Ionization Mass Spectrometry: Settings and Calibration Guide

Explore detailed screenshots and instructions for setting up laser ionization with specific voltages, menu configurations, and pump controls. Includes crucial information on V mode, heater settings, flow rate, and more. Perfect for optimizing your mass spectrometry experiments!

duscha
Download Presentation

Advanced Laser Ionization Mass Spectrometry: Settings and Calibration Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Screenshots January 27 SP-AMS

  2. Laser

  3. Menus

  4. Menu 1, 2, 3

  5. Menu 4 Laser On high m/z

  6. Voltages For V mode (positive ion mode!!)

  7. Analog/Digital Tab (laser off) DIO5 =1, DIO6=0

  8. Analog/Digital Tab Laser on DIO5 =0, DIO6=0

  9. Pumps Inlet Valve Closed Lens P = 0 Back P = 0.78

  10. Pumps Inlet Valve Open Lens P = 1.28 Back P = 4.99

  11. Heater and General Info • HB V mode = 40.5 in the menu, 38 on readout • Heater T Readout = 490C, 4.3V, 1.28A • Filament emission = 1.25 mA • Flow rate 1.35

  12. TPS V menus(last saved after Bill retuned it) 120126_v_41.set_f3.set

  13. 120126_v_41.set_f3.set

  14. Bitwise V

  15. TD settings

  16. Laser on - V

  17. Laser off

  18. Vmode m/z calibration

  19. W mode first tuning

  20. Jan 28, 6 pm – N winds, fullerenes from the power plant ?

  21. Servo check

More Related