Download
1 / 35
360 likes | 364 Views
Organics to petroleum What are the major differences in the general organic chemistry of terrestrial vs. marine organic matter? What are the important steps in the maturation of marine organic matter to form petroleum? Under what conditions of burial do these step occur?
E N D
Organics to petroleum What are the major differences in the general organic chemistry of terrestrial vs. marine organic matter? What are the important steps in the maturation of marine organic matter to form petroleum? Under what conditions of burial do these step occur? What are the major groups of organic compounds present in petroleum? What is the relationship between molecular weight and behavior of petroleum hydrocarbons? What is a ‘petroleum system’? How does the geothermal gradient influence petroleum maturation? What are petroleum ‘traps’? How do we locate them? What methods are used to define the extent of petroleum reservoirs? What is overpressure? What is a Hubbert Curve?
organics clastic sediment marine/lacustrine terrestrial
marine/lacustrine organics: phytoplankton, zooplankton; “sapropel”; fats, resinous, waxy terrestrial organics: vascular plants: “humic”; cellulose, lignin, carbohydrates
carbon dioxide evolved methane evolved marine organic matter H:C ratio km buried 20oC (decarbox- lyation) 1.0 2.0 3.0 4.0 5.0 kerogen 60oC 90oC petroleum liquids 120oC asphalt, bitumen 200oC
Burial depth and local geotherm determine the maturation of petroleum hydrocarbons. The hydrocarbon systems in central NY reached temps of 140 +, so most of the local rocks yield natural gas.
Finding oil: the first oil wells were located in the vicinity of natural oil seeps. Natural oil seeps were used for millennia as sources of tar and lubricating oils.
Cuttings Rotary drill bit A rotary drill is attached to a drill stem. The rotation of the bit is driven by drilling mud pumped down the drill stem. The returning mud lifts cuttings from the well and cools the drill bit.
Coring of the well during drilling is expensive – note the diamonds. Cores provide information about the details of rock structure and composition.
Well ‘development’ – improving the permeability of the reservoir.
Many oil and gas reservoirs are 1000’s of feet beneath the surface, and in offshore settings, under 100’s to 1000’s of feet of water. Finding petroleum reservoirs requires very precise location and definition of subsurface rock masses.
Numerous, stacked oil- bearing reservoirs. These may be interconnected and thus require sequential development.
Well logs are representations of the rock and fluid properties in a well. Lateral correlations of well logs help to define the structure and stratigraphy of source beds, reservoir beds and cap rocks.
Maps of porosity and permeability help define future drilling sites.
Past productivity trends help define future development of a reservoir.
Reflection seismic data is critical to subsurface exploration.
Wellhead pressure is provided by gas and water in the subsurface. Post-extraction treatment removes water and separates gas from oil.
Secondary treatment involves pumping of water or gas into wells that force oil into the extraction wells.
The circled well is the Mary Sudik #1, drilled by the Indian Territory Illuminating Oil Company in Oklahoma. On March 26, 1930, this well blew out at 6,470 feet. The force blew 20 pieces of heavy 30-foot drill pipe out of the hole! The "Wild Mary Sudik" was finally plugged off 11 days after blowing out, through the heroic efforts of dozens of people. Six years later, theSudik lease had produced five million barrels of oil !
Overpressure may result in well ‘blow-outs’ ‘Christmas tree’ valve systems control well head pressure.
The Hubbert curves for petroleum discovery and production.
marine organics: phytoplankton, zooplankton terrestrial organics: vascular plants
Methane evolved Coal Rank H2O H:C ratio Peat Lignite Sub-bituminous Bituminous Anthracite Graphite 20oC 50oC 80oC 160oC 240oC
