1 / 13

Types of Code Segments

Types of Code Segments. There are two types of code segments: Conforming Code Segment Nonconforming Code Segment. Conforming Code Segment. An executable segment whose descriptor has the conforming bit set

doyle
Download Presentation

Types of Code Segments

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Types of Code Segments • There are two types of code segments: • Conforming Code Segment • Nonconforming Code Segment

  2. Conforming Code Segment • An executable segment whose descriptor has the conforming bit set • It permits sharing of procedures that may be called from various privilege levels but should execute at the privilege level of the calling procedure. • Example: math libraries • When control is transferred to a conforming segment, the CPL does not change

  3. Nonconforming Code Segment • Most code segments are not conforming • For nonconforming segments, control can be transferred without a gate only to executable segments at the same level of privilege • To transfer control to higher privilege levels(not numerical)-for e.g. application want to use system service- CALL instruction need to be used with call-gate descriptors • JMP instruction never transfer control to a nonconforming segment whose DPL ≠ CPL.

  4. Privilege Check for Control Transfer without Gate

  5. Gate Descriptors • To provide protection for control transfers among executable segments at different privilege levels, the 80386 uses gate descriptors. • There are four kinds of gate descriptors: • Call gates  for far jmp & call • Trap gates  for exceptions • Interrupt gates  for interrupts • Task gates  for task switching

  6. Call gates • A call gate descriptor may reside in GDT or LDT • A call gate has two primary functions: 1. To define an entry point of a procedure 2. To specify the privilege level of entry point • When h/w recognizes that the destination selector refers to a gate descriptor the operation of the instruction is expanded by the contents of the call gate.

  7. Call gates • The selector and offset fields of a gate form a pointer to the entry point of a procedure Format of 80386 Call Gate

  8. Privilege Check for Control Transfer with Gate • The far pointer (48-bit logical address of two components: a 16-bit segment selector and a 32-bit offset) operand of the control transfer instruction does not point to the segment and offset of the target instruction; rather the selector part of the pointer selects a gate, and the offset is not used.

  9. Privilege Check for Control Transfer with Gate

  10. Privilege Check for Control Transfer with Gate • Four different privilege levels are used to check the validity of a control transfer via a call gate: 1. CPL 2. RPL of the selector used to specify the call gate. 3. DPL of the gate descriptor. 4. DPL of the descriptor of the target segment

  11. Privilege Check for Control Transfer with Gate • Gates can be used for control transfers to numerically smaller privilege levels or to the same privilege level • For a JMP instruction to a nonconforming segment, the privilege rules that must be satisfied are : MAX (CPL,RPL) ≤ gate DPL (numerically) target segment DPL = CPL (numerically)

  12. Privilege Check for Control Transfer with Gate • For a CALL instruction, the privilege rules that must be satisfied are : MAX (CPL,RPL) ≤ gate DPL (numerically) target segment DPL ≤ CPL (numerically)

  13. Privilege Check for Control Transfer with Gate

More Related