Tips and Tricks For Ding Repair

1. Tips and Tricks For Ding Repair No matter how great a surfer you are, one day you will have to face the pain of having a ding on your favorite surfboard. Dings are very common, especially if you are a beginner. So, knowing basic ding repair tricks is a great way to ensure that your surfboard does not undergo a lot of damage. Why should you learn to fix a ding? While it’s obvious that professionals to repair surfboards will always do a far better job at repairing your surfboard, than you will, seeking their help all the time is expensive and also, not worth it in case of minor ding repair. You can save a lot of money by fixing minor dings on your own, moreover, save yourself from the tiresome waiting for the board to come back from the repair shop. How to fix dings on your surfboard? Take a look at the following steps to know the best way of repairing dings on your surfboard. ●Get all the necessary supplies You can either buy a complete ding repair kit available at shops or buy the equipment individually. • Safety mask and goggles • Sandpaper • Masking tape • Fiberglass cloth • Sanding resin and catalyst • Acetone • Paintbrush ●Get rid of the rotten and damaged area Remove the damaged area. If you have a new surfboard, there are probably fewer things to remove, but in case the ding has been there for a long time, you will have to work quite a bit. ●Clean the surface Remove all traces of sand, mud, and dirt, and clean your surfboard properly. ●Mask Keeping aside the area with the ding, protect the surrounding with masking tape to ensure the surface is not damaged. ●Fill in the gaps Make sure that there is no sand or water trapped in the cracks and fill the gaps with a Q-cell mixture. After pouring the mix, wait for it to harden.

2. ●Sand the area Sand its ding area until the Q-Cell mixture becomes flat with the board. Sand is a bit lower than the surface to accommodate the height with the resin coat. ●Repair the glass Cut 2 circles of fiberglass and mix it with the resin. Apply the mixture on the ding with the help of a paintbrush. Make sure that the resin is spread out evenly and the glass is firmly pressing the board. ●Sand again Keep sanding the area until it comes to the surface as the rest of the board. ●Add a hot coat Add another layer of hot resin with some extra drops of catalyst. ●Sand and polish the area, and let it sit for at least 1 to 2 days. Conclusion This article discusses the ways of ding repair to make your surfboard look as good as new without professional help. Reach out to professionals to get the best assistance for ding repair. Source: https://dingzap.com/product/ding-zap