How to Repair Dings and Dents on Your Surfboard

1. How to Repair Dings and Dents on Your Surfboard A surfboard can be damaged, even for the most professional and experienced surfers. It can happen to anyone, so you should know where and how to repair your surfboards. Surfboard repairing should be done professionally, and you shouldn’t try DIY methods as they could cause more damage to your surfboards. Surfboard repair professionals use special repair kits and methods to repair dings and dents on a surfboard. A surfboard can be damaged simply from scrapping rocks, grounding out, hitting a reef, or any other object while surfing or carrying it to the beach. Dings, dents, and scratches are the most common issues that can occur on your board and need to be repaired before your next trip to the beach for some quality surfing. There are different ways for surfboard repair depending on the type of damage that occurred and its severity. Usually, a surfboard repair kit contains the following items: Sandpaper Fiberglass Masking tape Mixing cup Sanding resin and catalyst Acetone Safety mask Wax comb Razorblade Paintbrush Safety glasses Q-cell filler These items are used to repair different types of damages on a surfboard. A surfboard repair professional follows the following steps to repair dings and dents on your surfboard: Cut it out The first step is to cut the damaged part with a razor blade and remove it from the surfboard. It is the process of removing broken, crushed, or rotted parts to give you a clean surface for repairs. Clean the surface After removing the broken, crushed, or rotted part, you need to clean the surface and remove any wax around the damaged area using a wax comb. You should also use acetone to clean properly the damaged area to apply the mixture. Sand down the surfboard Use sandpaper to make the damaged surface smoother to applying the repairing mixture properly. Tape the dented surface It provides better stability and control while applying the mixture to the damaged area.

2. Apply the mixture After sanding down and taping the dented area using masking tape, it’s time to create the mixture using sanding resin in a Q-cell filler to make a thick white paste. Now, apply this mixture to all the grooves and edges of the ding. Apply the same mixture on the fiberglass and spread it evenly. Now, attach the fiberglass to the damaged area where you have already applied the Q-cell mixture. Sanding the surfboard It’s time to sand the surfboard again once the fiberglass is attached to the damaged area. It is a vital process to provide finishing touches to your surfboard. Apply resin coating After sanding down your surfboards, apply a final coating of resin to repair and seal the fiberglass before the wet sanding. Wet Sanding Once the resin coating dries, it’s time for wet sanding of your surfboard. Use a little bit of water and use the sandpaper in a circular motion to smooth the area. These are the common steps that professionals follow for surfboard repair. You can purchase a ding repair kit from the market to repair dings and dents from your surfboard. Read the instructions and repair guide carefully before starting the repairing process. Source: https://dingzap.com/