1 / 16

Radiation Environment at AWAKE

Radiation Environment at AWAKE. Eduard Feldbaumer, Silvia Cipiccia, Helmut Vincke AWAKE Collaboration Meeting – April 2014. Outline. Simulation parameters Side injection: Prompt dose rate Damage to Electronics On axis injection Prompt dose rate Damage to Electronics

dillian
Download Presentation

Radiation Environment at AWAKE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Radiation Environment at AWAKE Eduard Feldbaumer, Silvia Cipiccia, Helmut Vincke AWAKE Collaboration Meeting – April 2014

  2. Outline • Simulation parameters • Side injection: • Prompt dose rate • Damage to Electronics • On axis injection • Prompt dose rate • Damage to Electronics • Dose rate from Activation • Radiation background at Lanex screen • Summary

  3. Proton source routine • Momentum 400 GeV/c • Momentum spread 1.2 GeV/c(1 sigma) • Initial distr. (1 sigma): • x, y = 0.02 cm • z = 13.9 cm • Divergence (mrad): • small = 0.024 • large = 0.36

  4. Side injection: Plasma Cell 40 mm • Rubidium gas • r = 20 mm • Plasma cell - Steel • l = 10 m • d = 2 mm • Offset 5 mm up • Proton shielding - Steel • l = 6 m • r = 15 mm • d = 1 mm e- p+ Plasma cell Vacuum chamber Cut through plasma cell

  5. Prompt dose – Nominal operation • Nominal operation • Beam intensity: 3E11 p+/bunch • Repetition rate: 1/30 Hz AWAKE CNGS

  6. Damage to electronics (D2E) • Cumulative damage commercial COTS hardened electronics accelerators Semiconductors Polymers Ceramics Metals and alloys • Stochastic damage • From M. Brugger ‘Radiation Damage to electronics at the LHC’, IPAC2012: • Commercial equipment: ~107 HEH/cm2/year From M. Brugger presentation for CERN FLUKA user meeting 2008

  7. Fluka Simulations Results 15 mm steel 6 m long Dose equivalent [mSv/bunch] 1 MeV n-eqfluence per year HEH fluence per year 1013n/cm2 107cm-2

  8. On axis injection : updated geometry Lanex Screen (Gd2O2S) Plasma Cell from ErdemÖz Bending Magnet Separation wall from Sylvain Girod Inner & outer steel tube 3.5 cm Rubidium Thermal oil Microtherm layer

  9. Prompt dose rate mSv/bunch New Geometry Old Geometry

  10. Damage to Electronics • 1 MeV neutron equivalent fluence per year 1013n/cm2 • HEH fluence per year 107cm-2

  11. First Activation Simulations • Irradiation: 2 x 4 weeks/year 4 years • LS 2 not considered

  12. Residual Dose [mSv/h] End of second run End of last run < 15 uSv/h After 1 hour After 1 month

  13. Electron & Proton simulations • 2 GeV electron beam from plasma cell bent by the bending magnet • 400 GeV proton beam (3e11 p+/bunch) through plasma cell

  14. Lanex screen: Noise level • Energy deposition per electron (GeV/cm3) • Energy deposition per proton bunch (GeV/cm3) Electron: ~ 5x10-5GeV/cm3 Proton bunch: ~ 50 GeV/cm3 Signal:Noise = 10 ~ 107 e-  ~ 2pC

  15. Summary • Damage to Electronics in vicinity of Electron Spectrometer • cumulative effects due to dose and neutron flux negligible • SEE: HEH fluence limit exceeded close to beam • New Plasma cell design: • No improvements in terms of dose and D2E • Activation level in AWAKE area: • Residual dose < 15 uSv/h • Lanex screen: • signal to noise ratio 10: ~ 2 pC e- (2 GeV)

  16. Thank you for your attention!

More Related