1 / 39

Review for Introduction to Remote Sensing: Science Concepts and Technology

Review for Introduction to Remote Sensing: Science Concepts and Technology. Ann Johnson Associate Director ann@baremt.com. “Empowering Colleges: Expanding the Geospatial Workforce”.

devin
Download Presentation

Review for Introduction to Remote Sensing: Science Concepts and Technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Review for Introduction to Remote Sensing:Science Concepts and Technology Ann Johnson Associate Director ann@baremt.com “Empowering Colleges: Expanding the Geospatial Workforce” Funded by National Science Foundation Advanced Technological Education program [DUE #1304591. Author’s opinions are not necessarily shared by NSF

  2. What is Remote Sensing and how is it used? • Passive and Active Remote Sensing • Electromagnetic Spectrum and sensor wavelength • and their “band numbers” • Resolutions – Temporal, Spatial, Spectral and • Radiometric • Composite images: Pixels, Brightness and Digital • Numbers • Pixels and its Remote Sensing Signature graphic • Finding and using data – Landsat focused • Lidar – what is it and how can it be used • Resources to learn more

  3. USGS Definition Acquiring information about a natural feature or phenomenon, such as the Earth’s surface, without actually being in contact with it. • Sensor can be ground based, aerial or satellite.

  4. Not just a pretty picture! How it can be used! • Land Use Change • Climate • Disasters • Floods, fires, volcanoes, earthquakes • Forestry • Agriculture • Many more!

  5. Factors to consider when you use remote sensing data to understand or solve a geospatial problem • Scale – or Resolution • Where is the study location? • How large is the study are? • What is the “size” of features under study? • Is this a one time event or over multiple times over days, months or years? • Access to needed resources: • Data and its cost? • Hardware and software and skills to use them • Why is study important? Important for “real-world use by industry or government - ROI

  6. Use “sensors” to detect and acquire the “information” about features The human eye as a sensor and brain as processor!

  7. Two Types of Remote Sensing Sensors • Active – Energy source is “provided” • Lidar – Light Detection and Ranging using pulsed laser beam from one wavelength) • SAR – Synthetic Aperture Radar – pulses of radio wavelengths • Passive – Sun as the “energy source” • Landsat • MODIS • Aster

  8. Two Types of Remote Sensing Sensors • Active – Energy source is “provided” • Lidar – Light Detection and Ranging using pulsed laser beam (of varying wavelengths) • SAR – Synthetic Aperture Radar – pulses of radio wavelengths • Passive – Sun as the “energy source” • Landsat • MODIS • Aster What about our eyes – Active or Passive?

  9. Graphic From: Natural Resources Canada Fundamentals of Remote Sensing Tutorial Need: • energy source, • sensor(s), • target, • collection method, • processing method and • a distribution method http://www.nrcan.gc.ca/earth-sciences/geomatics/satellite-imagery-air-photos/satellite-imagery-products/educational-resources/9309

  10. Electromagnetic Spectrum • NASA Movie http://missionscience.nasa.gov/ems/index.html • Can download a NASA book on the Tour of the Electromagnetic Spectrum http://missionscience.nasa.gov/ems/TourOfEMS_Booklet_Web.pdf

  11. One Wavelength crest crest

  12. “Resolution” • Spectral –wavelengths of spectrum collected by sensors • Spatial – size of area on the ground covered by one pixel (grid size) which can affect size of image footprint • Temporal – how often data (image) is acquired for a location • Radiometric – the sensitivity of sensor to collect very slight differences in emitted or reflected energy

  13. Spectral Resolutions Landsat SensorsCollect data inspecific Wavelengthsor “Bands”of ElectromagneticSpectrum • Band 1: 0.45 - 0.52 m (Blue) • Band 2: 0.52 - 0.60 m (Green) • Band 3: 0.63 - 0.69 m (Red) • Band 4: 0.76 - 0.90 m (Near infrared) • Band 5: 1.55 - 1.75 m (Mid-Infrared) • Band 6: 10.4 - 12.5 m (Thermal infrared) • Band 7: 2.08 - 2.35 m (Mid-infrared) 6 7 5 4 3 2 1 Our Eyes Landsat 7

  14. Spectral Resolutions • SAR; radar • Lidar; 600-1000 nm (some visible and some infrared) • Multispectral: 450-2300 nm (some visible and some infrared) Lidar Multispectral

  15. Spatial Resolution Comparison – Scale • High spatial resolution: • Meter to sub meter pixels • Small objects can be identified • Small area for each image footprint • Moderate spatial resolution • Generally 30 meter pixels (Landsat) • Object identification generally greater than 30 meters • Moderate area image footprint • Low spatial resolution • 1 KM or larger pixels (MODIS) • Objects smaller than 1 KM not observable • Very large footprint http://biodiversityinformatics.amnh.org/tool.php?content_id=144

  16. Look at Examples of Different types of Imagery and compare their “footprints” – logon to link below: http://biodiversityinformatics.amnh.org/tool.php?content_id=144

  17. Temporal Resolution • How often data is collected of the same location • Only once • Daily – or multiple times a day • “Frequently” – every so many days • Landsat missions • Once every 16 days – but . . . . • Must be clear (or have a percent cloud coverage) • Must be “important” (U.S. and outside U.S.)

  18. Landsat Image – Orbits (Path and Rows) View Orbits video

  19. Why focus on Landsat Data? • Cost • Access • Archive • Tools and other resources

  20. Atmosphere “blocks” some wavelengths: sensors collect wavelength data in specific regions (bands or channels) of the spectrum Lidar

  21. Gray shading: WavelengthRegions with good transmission Lidar

  22. What Does “data” look like? Landsat 7 Spectral Bands and “gray scale” values of each band data set Landsat 7 - Band data comes in as rasters with grayscale values 0 to 255 Landsat 8 – more than 4,000 scaled to 55,000 gray values

  23. Radiometric Resolution • Ability of a Sensor to discriminate very small differences in reflected or emitted energy • Pixel Brightness – White to Black in shades of Gray for one band • Digital Number: the numeric values of its Brightness • Landsat 5 and 7 are 8 bit for 256 gray levels (0 to 255) • Landsat 8 is 12 Bit for 4,096 gray levels (scaled to 55,000) B A C

  24. Creating Visualizations: Composites Brightness values (DN) from three Bands are combined and colored on a computer monitor by designating which of the 3 bands will be coded as Red, Blue or Green

  25. Landsat 7Natural or True Color Bands 3, 2, 1 False Color Band 5, 4, 3 Pseudo Color Bands 7, 5, 3

  26. Selecting three different bands as Red, Green or Blue creates different images of the same location Note: Band numbers for Landsat 5 and 7 are different than for Landsat 8

  27. Resource for Viewing Natural and False Color Composites on USGS Website • http://landsat.usgs.gov/LDCM_Image_Examples.php • Go to this site and use the swipe to see the difference using different bands for images from four regions of the U.S.

  28. Change Matters Website • See http://www.esri.com/software/landsat-imagery/viewer

  29. Identifying and Classifying Features • Visual investigate using composites • Using “band algebra” with data from bands • Normalized Difference Vegetation Index (NDVI) uses Near Infra Red and Red bands • Classification using spectral data from multiple bands for one pixel creating a “spectral signature”

  30. Spectral Signatures From Different Surfaces in an Image

  31. NDVI –Image Analysis and “Greeness” Using NIR and Red Bands NDVI Leaf

  32. Land Cover Change – and “Greeness” - NDVI

  33. Classification Using Software • Unsupervised Classification • User tells Software how many “classes” to group the image data into and software “gathers like values” into “classes” with similar spectral values • User then labels the classes into land use types and may combine classes

  34. Unsupervised Classification Natural Color Composite of San Fernando Valley, CA Data clustered by software and colored to match Land Use types (i.e. blue = water, green = vegetation, etc.)

  35. Supervised Classification • User identifies pixels that are different types of feature (soil, urban, vegetation, etc) and creates a file with spectral information that can be used by software. • Software uses spectral value file of the different features and classifies pixels based on the specified land cover types.

  36. So many satellites! Resources: • Satellite Viewer • http://science.nasa.gov/iSat/?group=visual&satellite=14484 • EarthNow! Landsat Image Viewer • Real time view as data is collected showing current path of satellite • http://earthnow.usgs.gov/earthnow_app.html?sessionId=fdbe7bc05944802eda2c68d1e603ed8462919

  37. Finding Data: https://lpdaac.usgs.gov/data_access https://lpdaac.usgs.gov/data_access/glovis http://earthexplorer.usgs.gov/ http://glovis.usgs.gov/ Go to GloVIS and Try Path 41 and Row 36

  38. Lidar – Active Remote Sensing NOAA Lidar Tutorial: http://www.csc.noaa.gov/digitalcoast/_/pdf/lidar101.pdf

  39. Thank You! Much of the material for this Presentation was developed by iGETT-Remote Sensing grant from the National Science Foundation (DUE 1205069) More Exercises: iGETT.delmar.edu Concept Modules on YouTube Channel at iGETT Remote Sensing Education Ann Johnson ann@baremt.com ajohnson0847@kctcs.edu

More Related