1 / 14

Regeneration of Softener

Regeneration of Softener. IWTI. A Key Problem of Regeneration by Soaking Method. Feeding - Soaking - draining. Regenerant. Without distributor. 1. 5. 2. 3. 4. 3. 2. 1. 0. Spent regenerant. Declining potential of regeneration Diluted by released water from resin.

dareh
Download Presentation

Regeneration of Softener

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Regeneration of Softener IWTI A Key Problem of Regeneration by Soaking Method

  2. Feeding - Soaking - draining Regenerant Without distributor 1 5 2 3 4 3 2 1 0

  3. Spentregenerant • Declining potential of regeneration • Diluted by released water from resin

  4. Feeding - Soaking - draining Regenerant Without distributor Fresh Regenerant Completed Uncompleted Spent Regenerant

  5. Feeding - Soaking - Draining Regenerant Without distributor Fresh Regenerant Completed Uncompleted Uncompleted Spent Regenerant Spent Regenerant Open

  6. Feeding - Soaking - draining With defective distributor Regenerant Fresh Regenerant Completed Uncompleted SpentRegenerant

  7. Feeding - Soaking - Draining With defective distributor Regenerant Completed Uncompleted

  8. Feeding - Soaking - draining With completed distributor Regenerant Fresh Regenerant Completed Uncompleted Spent Regenerant

  9. Feeding - Soaking - draining With completed distributor Regenerant Completed rapidly Uncompleted

  10. Feeding - Soaking - draining With completed distributor Regenerant Completed Slowly

  11. Feeding - Soaking - draining With completed distributor Regenerant Completed Fresh Regenerant Still in progress Spent Regenerant

  12. A Key Problem of Regeneration by Soaking Method • Wastewater of regenerant is held at the lower part of resin layer. • Moreover, solution of NaCl is diluted by released water from resin at the first stage of feeding

  13. A Key Problem of Regeneration by Soaking Method • So, the resin in the lower part of tank is not regenerated enough • At the last stage, if they drain out regenerant too rapidly, they cannot keep enough time to regenerate resin in the lower part

  14. Improvement Idea • They should feed and drain out regenerant more slowly • If they can expect for uniform current with regenerant distributor, water should be drained out to the bottom of tank before feeding regenerant

More Related