1 / 5

Troubleshooting Pulse Width and Field Leakage in Horn Circuit

Investigate pulse width adequacy and field leakage issues in the 1st horn circuit. Check pulse width for current spread and troubleshoot field leakage concern in the inner conductor. Evaluate horn inductance for potential increase.

danielle-pena
Download Presentation

Troubleshooting Pulse Width and Field Leakage in Horn Circuit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pulse width for the 1st horn is 0.4 ~ 0.8 ms. H.V. is 1.2~0.6 kV. I’m not sure if this pulse width is wide enough for the current to spread out. It should be checked. For the leakage of the field, I don’t understand what is the problem. Inside outer-conductor, the field is anyway proportional to 1/r? (Horn inductance will be increased.)

More Related