1 / 36

Chapter 11: Flow over bodies; Lift and Drag

Chapter 11: Flow over bodies; Lift and Drag. Eric G. Paterson Department of Mechanical and Nuclear Engineering The Pennsylvania State University Spring 2005. Note to Instructors.

danica
Download Presentation

Chapter 11: Flow over bodies; Lift and Drag

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 11: Flow over bodies;Lift and Drag Eric G. Paterson Department of Mechanical and Nuclear Engineering The Pennsylvania State University Spring 2005

  2. Note to Instructors These slides were developed1, during the spring semester 2005, as a teaching aid for the undergraduate Fluid Mechanics course (ME33: Fluid Flow) in the Department of Mechanical and Nuclear Engineering at Penn State University. This course had two sections, one taught by myself and one taught by Prof. John Cimbala. While we gave common homework and exams, we independently developed lecture notes. This was also the first semester that Fluid Mechanics: Fundamentals and Applications was used at PSU. My section had 93 students and was held in a classroom with a computer, projector, and blackboard. While slides have been developed for each chapter of Fluid Mechanics: Fundamentals and Applications, I used a combination of blackboard and electronic presentation. In the student evaluations of my course, there were both positive and negative comments on the use of electronic presentation. Therefore, these slides should only be integrated into your lectures with careful consideration of your teaching style and course objectives. Eric Paterson Penn State, University Park August 2005 1 These slides were originally prepared using the LaTeX typesetting system (http://www.tug.org/) and the beamer class (http://latex-beamer.sourceforge.net/), but were translated to PowerPoint for wider dissemination by McGraw-Hill.

  3. Objectives • Have an intuitive understanding of the various physical phenomena such as drag, friction and pressure drag, drag reduction, and lift. • Calculate the drag force associated with flow over common geometries. • Understand the effects of flow regime on the drag coefficients associated with flow over cylinders and spheres • Understand the fundamentals of flow over airfoils, and calculate the drag and lift forces acting on airfoils.

  4. Motivation

  5. Motivation

  6. External Flow • Bodies and vehicles in motion, or with flow over them, experience fluid-dynamic forces and moments. • Examples include: aircraft, automobiles, buildings, ships, submarines, turbomachines. • These problems are often classified as External Flows. • Fuel economy, speed, acceleration, maneuverability, stability, and control are directly related to the aerodynamic/hydrodynamic forces and moments. • General 6DOF motion of vehicles is described by 6 equations for the linear (surge, heave, sway) and angular (roll, pitch, yaw) momentum.

  7. Fluid Dynamic Forces and Moments Ships in waves present one of the most difficult 6DOF problems. Airplane in level steady flight: drag = thrust and lift = weight.

  8. Drag and Lift • Fluid dynamic forces are due to pressure and viscous forces acting on the body surface. • Drag: component parallel to flow direction. • Lift: component normal to flow direction.

  9. Drag and Lift • Lift and drag forces can be found by integrating pressure and wall-shear stress.

  10. Drag and Lift • In addition to geometry, lift FLand drag FD forces are a function of density  and velocity V. • Dimensional analysis gives 2 dimensionless parameters: lift and drag coefficients. • Area A can be frontal area (drag applications), planform area (wing aerodynamics), or wetted-surface area (ship hydrodynamics).

  11. Example: Automobile Drag Scion XB Porsche 911 CD = 1.0, A = 25 ft2, CDA = 25ft2 CD = 0.28, A = 10 ft2, CDA = 2.8ft2 • Drag force FD=1/2V2(CDA) will be ~ 10 times larger for Scion XB • Source is large CD and large projected area • Power consumption P = FDV =1/2V3(CDA) for both scales with V3!

  12. Drag and Lift • For applications such as tapered wings, CLand CD may be a function of span location. For these applications, a local CL,x and CD,x are introduced and the total lift and drag is determined by integration over the span L

  13. “Lofting” a Tapered Wing

  14. Friction and Pressure Drag • Fluid dynamic forces are comprised of pressure and friction effects. • Often useful to decompose, • FD = FD,friction + FD,pressure • CD = CD,friction + CD,pressure • This forms the basis of ship model testing where it is assumed that • CD,pressure = f(Fr) • CD,friction = f(Re) Friction drag Pressure drag Friction & pressure drag

  15. Streamlining • Streamlining reduces drag by reducing FD,pressure, at the cost of increasing wetted surface area and FD,friction. • Goal is to eliminate flow separation and minimize total drag FD • Also improves structural acoustics since separation and vortex shedding can excite structural modes.

  16. Streamlining

  17. Streamlining via Active Flow Control • Pneumatic controls for blowing air from slots: reduces drag, improves fuel economy for heavy trucks (Dr. Robert Englar, Georgia Tech Research Institute).

  18. CD of Common Geometries • For many geometries, total drag CDis constant for Re > 104 • CD can be very dependent upon orientation of body. • As a crude approximation, superposition can be used to add CDfrom various components of a system to obtain overall drag. However, there is no mathematical reason (e.g., linear PDE's) for the success of doing this.

  19. CD of Common Geometries

  20. CD of Common Geometries

  21. CD of Common Geometries

  22. Flat Plate Drag • Drag on flat plate is solely due to friction created by laminar, transitional, and turbulent boundary layers.

  23. Flat Plate Drag • Local friction coefficient • Laminar: • Turbulent: • Average friction coefficient • Laminar: • Turbulent: For some cases, plate is long enough for turbulent flow, but not long enough to neglect laminar portion

  24. Effect of Roughness • Similar to Moody Chart for pipe flow • Laminar flow unaffected by roughness • Turbulent flow significantly affected: Cf can increase by 7x for a given Re

  25. Cylinder and Sphere Drag

  26. Cylinder and Sphere Drag • Flow is strong function of Re. • Wake narrows for turbulent flow since TBL (turbulent boundary layer) is more resistant to separation due to adverse pressure gradient. • sep,lam ≈ 80º • sep,lam ≈ 140º

  27. Effect of Surface Roughness

  28. Lift • Lift is the net force (due to pressure and viscous forces) perpendicular to flow direction. • Lift coefficient • A=bc is the planform area

  29. Computing Lift • Potential-flow approximation gives accurate CL for angles of attack below stall: boundary layer can be neglected. • Thin-foil theory: superposition of uniform stream and vortices on mean camber line. • Java-applet panel codes available online: http://www.aa.nps.navy.mil/~jones/online_tools/panel2/ • Kutta condition required at trailing edge: fixes stagnation pt at TE.

  30. Effect of Angle of Attack • Thin-foil theory shows that CL≈2 for  < stall • Therefore, lift increases linearly with  • Objective for most applications is to achieve maximum CL/CD ratio. • CD determined from wind-tunnel or CFD (BLE or NSE). • CL/CD increases (up to order 100) until stall.

  31. Effect of Foil Shape • Thickness and camber influences pressure distribution (and load distribution) and location of flow separation. • Foil database compiled by Selig (UIUC)http://www.aae.uiuc.edu/m-selig/ads.html

  32. Effect of Foil Shape • Figures from NPS airfoil java applet. • Color contours of pressure field • Streamlines through velocity field • Plot of surface pressure • Camber and thickness shown to have large impact on flow field.

  33. End Effects of Wing Tips • Tip vortex created by leakage of flow from high-pressure side to low-pressure side of wing. • Tip vortices from heavy aircraft persist far downstream and pose danger to light aircraft. Also sets takeoff and landing separation at busy airports.

  34. End Effects of Wing Tips • Tip effects can be reduced by attaching endplates or winglets. • Trade-off between reducing induced drag and increasing friction drag. • Wing-tip feathers on some birds serve the same function.

  35. Lift Generated by Spinning Superposition of Uniform stream + Doublet + Vortex

  36. Lift Generated by Spinning • CL strongly depends on rate of rotation. • The effect of rate of rotation on CD is small. • Baseball, golf, soccer, tennis players utilize spin. • Lift generated by rotation is called The Magnus Effect.

More Related