1 / 20

Advanced Calorimeter Detector Upgrade Setup for Trigger Validation Board

This proposal outlines the design upgrade for a calorimeter detector involving a series of boards and fiber links. It discusses the use of ATCA boards, mezzanine boards, and optic fibers for trigger validation, data processing, and slow control. The cost breakdown and timeline for development are detailed. Potential upgrades to the Trigger Validation Board and inputs/outputs are also highlighted.

cuthbertj
Download Presentation

Advanced Calorimeter Detector Upgrade Setup for Trigger Validation Board

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECAL crate (front view) TVB TVB L0DU TRIG40 (tell40 structure) X 14 Selection board in barrack TELL1 (1MHz) cyril.drancourt@lapp.in2p3.fr

  2. Actual Design Upgrade – setup Calorimeter detector 20 bits @40Mhz Link = 4 copper wire Serial LVDS 280Mhz Front-end boards Optic Mezzanine rubbon of 12 fiber Trigger Validation Board (TVB) 32 bits @40Mhz Link = Optic fibre 1.6 Ghz Tell 40 system with 1.6 GHZ inputs Selection Board (SB) 108x32 bits @40Mhz Link = Optic fibre ~infiniband rate To Be Define 1,6Ghz or 4,8Ghz or… To farm DAQ 40Mhz To SuperODIN(LLT) To farm DAQ 1Mhz To L0DU cyril.drancourt@lapp.in2p3.fr

  3. Previsionnal Tell40 design ATCA board ATCA mezzanine cyril.drancourt@lapp.in2p3.fr

  4. TELL40 To replace LODU TELL40 To replace SB cyril.drancourt@lapp.in2p3.fr

  5. cyril.drancourt@lapp.in2p3.fr

  6. cyril.drancourt@lapp.in2p3.fr

  7. cyril.drancourt@lapp.in2p3.fr

  8. cyril.drancourt@lapp.in2p3.fr

  9. Other input by muons, LLT_L0DU Firmwarework: Clermont? cyril.drancourt@lapp.in2p3.fr

  10. 2 TRIG40 = full Calo trigger upgrade 7000€ 7000€ 7000€ 7000€ 5000€ LLT_CALO Firmwarework: Annecy ? (oldbologna concept) LLT_OUT_CALO Firmwarework: Annecy ? (linkwith LLT_L0DU firmware) Total installation cost = 8 x 7000 + 2 x 5000 = 66 000 € + common ATCA CratewithSuperODIN cyril.drancourt@lapp.in2p3.fr

  11. TELL40: Actual CPPM prototype in may 2011 ATCA board 1 microATCAcrate + commercial µ ATCA board withspecificboard on instead ATCA boardwith normal ATCA Crate ATCA mezzanine 2 stratix4 instead 1 stratix5 cyril.drancourt@lapp.in2p3.fr

  12. TELL40: CPPM schedule cyril.drancourt@lapp.in2p3.fr

  13. LAPP devellopment schedule ATCA Crate (15 slots) ATCA manager board: Commercial + CCPM part First prototype board Summer of 2012 > CCPM (Marseille) CCPM debugging First board available for LAPP: Proto: Spring of 2013 cyril.drancourt@lapp.in2p3.fr

  14. First possible LAPP devellopment setup Small ATCA Crate (2 slots) Commercial ATCA Carrier board Commercial ATCA manager board 7000€ 3500€ 3500€ 2000€ Computer With tools 4000€ First cost= 20 000 € cyril.drancourt@lapp.in2p3.fr

  15. LAPP Team previsionnal installation for Calorimeter Trigger upgrade START Electronic work END Electronic work TRIG40 Preliminary study (Timeline from Pierluigi Campana - 27/6/2011) cyril.drancourt@lapp.in2p3.fr

  16. Possible upgrade TVB Free space in EPPI FPGA TVB To implement new functions • Available Inputs: • 8 RJ45 connector on backplane • (8 bits@40Mz each) • (= instead PSPD Pattern bus) • 8 ECAL total energy • 8 ECAL cluster energy • 8 ECAL cluster adress • Available Outputs: • 3 optical link (32bit@40Mhz each) • Remarks: • Devellpment tools from 2005 • -> old in 2018… EPPI FPGA HCAL FPGA cyril.drancourt@lapp.in2p3.fr

  17. Slow-Control of FE crate – scheme1 FE Backplane CRATE FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB FEB & TVB conv-SPECS FEB & TVB FEB & TVB FEB & TVB clock-DRIVER GBT-SCA GBT FSC40 board Instead CROC cyril.drancourt@lapp.in2p3.fr

  18. Slow-Control of FE crate – scheme2 FE Backplane CRATE FEB Instead CROC TVB TVB DATA process conv-SPECS clock-DRIVER GBT-SCA GBT GBT FSC40 board TELL40 board cyril.drancourt@lapp.in2p3.fr

  19. Slow-Control of FE crate – scheme3 FE Backplane CRATE New TVB FEB I2C CROC Slot EMPTY DATA process DATA process GBT-SCA clk GBT GOL GBT TRIG40 board TELL40 board FSC40 board cyril.drancourt@lapp.in2p3.fr

More Related