180 likes | 207 Views
Explore the NEES Geotechnical Centrifuge at Davis, featuring high-frequency sensors and miniature modules for efficient earthquake research. Get insight into the development of this cutting-edge facility supported by NSF grants.
E N D
NEES and the NEES Geotechnical Centrifuge at Davis Dan Wilson Manager, Center for Geotechnical Modeling
NEES Collaboratory Othersite 1 System Integrator Othersite 2 Earthquake Researchers Site A NEESgrid Simulation/Experimental Facilities Educators & Students Site B NEES Consortium NEES Consortium Development Site C Other Practitioners Site Council Professional Engineers Slide courtesy of Bob Rietherman
7.1 x 18.8 mm 3.6 x 6.4 x 9.1 mm 5.6 x 8.9 mm 25 x 25 x 7.6 mm 8.9 x 8.9 x 2.5 mm • ICP • Miniature • Efficient package • Mature design • High frequency / wide bandwidth • as low as 10 mm want DC response, too • MEMS • Cheap sensors • Cheap conditioning • Micro?
Modular Design – dense packets of sensors eases installation, management. Miniature sensing element
Design as of early 2002 • PVC housing • glued or clamped • dimples for routing wires to sensors Good performance / size But over budget 3.8 cm Communication Module Sensor Manager 2.5 cm Sensor Manager, Communication Module, and batteries shown in single waterproof housing 5.6 cm
Proposal 9/21/02 Incorporate new open-source OTS wireless modules to reduce development costs
Thanks for your attention Acknowledgement: NSF-CMS 0086566 from the George E. Brown,Jr. Network for Earthquake Engineering Simulation program of NSF, and matching funds from UCD.