Chemistry Packet 1: Sections I and II (pg. 3-51)

1. Chemistry Packet 1: Sections I and II (pg. 3-51) Chemistry 2014-2015

2. Important Dates • Safety Contract due Th 8/28 • Safety Quiz Th 8/28 (you MUST pass this quiz and turn in your completed Safety Contract before you can participate in labs) • Section I/II Quiz F 9/12 • Section I/II Test W 9/17 • Element Research Project due M 9/29 • Labs on F 8/29, W 9/3, M 9/8

3. Section I Defining Matter

4. Lab Equipment and Safety • Chemists have specific tools and equipment that they use to study the world around them. They also have a set of guidelines for using tools and chemicals safely.

5. The Tools Chemists Use • Commonly-used equipment can be found on a page in this packet. You will need to be able to identify these pieces of equipment for your quiz/test, as well as on a daily basis. • The most accurate glassware to use for measuring liquid is a volumetric pipette (or just a pipette—these are not the flimsy plastic ones, but glass ones with clear markings on the side). Other accurate glassware pieces include the graduated cylinder and the burette. Erlenmeyer flasks and beakers are not considered accurate.

6. Some containers are safe for heating substances. These include test tubes, beakers, flasks, crucibles, and evaporating dishes. • One common piece of equipment that is not shown in your packet is the hot plate.

8. Laboratory Safety • Know the location of safety equipment and how to use it. • Safety Shower: near calculators • Eye Wash: near calculators, attached to safety shower(must wash eyes for 15-20 minutes) • First Aid Kit: front of class, below clock • Fire Blanket: next to safety shower (used to smother fires) • Fume Hood: back corner of classroom (used to contain fumes or smoke) • Fire Extinguisher: below fire blanket

10. Laboratory Safety: Dress appropriately (roll up sleeves, tie hair back, wear closed-toe shoes); read instructions carefully; double-check that you are using the correct chemicals; do not put chemicals back into their original bottles; wear goggles; clean up your station and return equipment to its proper place before you leave the lab; if you have any questions in the lab, or if an accident occurs, ask/tell your teacher.

11. Personalsafety equipment: goggles, gloves, apron Classroom safety equipment: fire blanket, fire extinguisher, safety shower, eye wash station, fume hood

12. Introduction to Chemistry • The Roots of Chemistry • More than a thousand years ago, people known as alchemists tried to transform substances into other substances (ex. turning ordinary metals into gold). They never succeeded, but as alchemists conducted experiments and looked over their successes and failures, they gradually created the early study of Chemistry. (Today we know that it actually is possible to convert one element to another, but it’s a very different process and sadly, it does not allow one to turn base metals into gold.)

14. When the alchemists succeeded in making new substances, they faced the challenge of determining whether each substance was gold. In other words, the alchemists needed to figure out if the new substance had the properties of gold.

16. A property is a characteristic or quality of a substance. You are going to try a similar experiment tomorrow by turning a penny from copper to silver to gold. You will need to write a hypothesis to explain what happens. • A hypothesis is a proposed explanation for an observation or scientific problem, which can be tested by further investigation (it is not an educated guess).

17. The Study of Matter and Change • Changes are constantly happening around us. These can be exciting (exploding fireworks) or mundane (baking cookies, which is still pretty nice). Chemistry is the study of what substances are made of, how they behave, and how they can be transformed. It is the study of matter and how matter changes.

18. Defining Matter • Matteris the word chemists use to refer to all the materials and objects in the world. Although many examples of matter are obvious (your desk, your phone, you), your senses alone are not always enough to tell you whether something is matter (you can’t see viruses, but you can still get sick from them, for example).

19. The amount of substance, or material, in an object is called its mass. Mass is a property of matter that can be measured. (It is also the same no matter where you are; weight, however, is not.) The amount of space something takes up is called its volume and is also a property of matter that can be measured. So, matter is anything that has mass and volume.

20. Is It Matter? • Solids, liquids, and gases are all composed of matter. • Some things may seem like matter, but are not. Matter must have mass and it must take up space. Examples of non-matter include heat and sound. Ideas also are not matter.

21. Measuring Matter • Chemists measure mass in grams (g) and kilograms (kg). There are 1000 g in 1 kg. • Electronic balances and triple-beam balances can be used to measure mass. With both of these balances, mass must be measured and recorded as exactly as possible; it may seem to make sense to round, but rounding can affect your lab work (and your lab grade—don’t do it). If you use an electronic balance, record all digits shown. For triple beam balances, estimate one more decimal place than you can read.

23. Chemists measure the volume of liquids and gases in milliliters (mL) and liters (L). There are 1000 ml in 1 L. You can measure the volume of a sample of a liquid by pouring it into a graduated cylinder and reading the number of mL on the side. Make sure to read the liquid level at the bottom of the meniscus (the curvature of the top of the liquid).

24. Fun fact—mercury’s meniscus bends the opposite way.

25. You can measure the volume of a regularly shaped solid object by measuring its dimensions in centimeters (length, width, height) and using a mathematical formula. This will give you volume in cubic centimeters (cm3). 1 cm3 = 1 mL.

26. 4.80 mL = 5.60 mL - 0.80 mL = 0.80 cm3 • In certain cases, you can use water displacement (shown on the right with the dinosaur) to determine the volume of a (small, insoluble) solid. • Read the initial water volume; add the object; read the new volume; and subtract. • What was the volume of the dinosaur? ________ mL = ________ cm3

27. Mass and Volume • It is possible for two substances to have the same volume but different masses, or the same mass but different volumes. For example, 1.0 cm3 of gold has a mass of 19.3 g, but 1.0 cm3 of copper has a mass of 9.0 g. This means that if you had the same mass of each, the copper would take up more space (have more volume) than the gold. This is due to a difference in density.

28. Density • Which is heavier, copper or gold? If you have equal volumes of each, the gold will always be heavier. This is due to density, which is the mass of a substance per unit of volume. • The formula for calculating density is shown on the right. Density is calculated by dividing mass by volume, so its units are g/mL or g/ cm3.

29. Packet 1 Example 1: Density • A piece of metal has a volume of 30.0 cm3 and a mass of 252 g. What is its density? Density = mass / volume = 252 g / 30.0 cm3 = 8.40 g/cm3

30. Identifying Matter Using Density • The density of a substance does not change with its size or shape. In other words, density is an intensive property (a property that does not change if the quantity of the substance changes). Intensive properties can be used to identify substances. (On the other hand, extensive properties DO change depending on the amount of matter—examples include mass and volume.)

31. Because density is an intensive property, it can be used to help identify the type of matter that an object or sample is made of. First, calculate the density of an object, then compare it with known density values in a reference table like the one on the right.

32. Packet 1 Example 2: The Fake Bar of Gold • If someone tried to trick you by coating a block of lead with a thin layer of gold, how could you prove the bar is fake? Use its mass and volume to determine its density. If the bar is actually lead coated with gold, its density will be higher than 8.4 g/cm3 (the density of lead is 11.4 g/cm3).

33. Packet 1 Example 3: Using Density to Identify a Metal • Look back at Example 1. What type of metal is this, and how do you know? The metal is brass; its density is 8.4 g/cm3.

34. Section II Basic Building Materials

35. Chemical Names and Symbols • Some chemical names are used in daily language (ex. aluminum, iron, ammonia). Other names are used mainly by chemists, such as sodium chloride for salt and sodium bicarbonate for baking soda. • Elements are the building materials of all matter. There are about 118 known elements; each one has a name and a symbol. The chemical symbol may be an abbreviation for the element’s name, but it is sometimes taken from a word in another language instead.

36. Elements combine in specific ratios to form compounds. A compound is represented by a chemical formula. For example, sodium chloride is NaCl and consists of a 1:1 ratio of sodium and chlorine. The chemical formula for carbon dioxide is CO2, which means it consists of a 1:2 ratio of carbon to oxygen (there are two oxygen atoms for every carbon atom).

37. Compounds can be very different in behavior and appearance from the elements they are composed of. For example, sodium is a shiny, soft, reactive metal and chlorine is a deadly gas, but sodium chloride is a white crystal that is relatively nontoxic.

38. Physical Form • Elements can exist as solids, liquids, or gases; these are represented with the symbols (s), (l), and (g) after the chemical formula. These are called the phases of matter. For example, water vapor is written H2O(g), liquid water is written H2O(l), and ice is written H2O(s). • There is another symbol for physical form, the symbol (aq) for aqueous. A substance is aqueous if it is dissolved in water (therefore, it has to be soluble).

39. Most substances are mixtures of compounds. In a mixture, the different substances do not have to be present in a specific ratio. For example, you can make chocolate chip cookies with ½ cup of chocolate chips per batch, or 2 cups of chocolate chips per batch. They’re still chocolate chip cookies.

40. The Copper Cycle • Copper is an element with the symbol Cu. As a solid powder, it has a distinctive orange-brown appearance. You are going to transform copper powder through a series of chemical reactions. If all works well, copper should reappear by the end of the experiment. • Evidence of a Chemical Change • A chemical change or chemical reaction is a transformation that alters the composition of one or more substances such that one or more new substances with new properties are produced. You can usually tell when a chemical reaction occurs because there is evidence of new substances forming. • Evidence of a chemical change includes a color change, evolution (production) of a gas, production of light, and a change in smell.

41. Conservation of Matter • The copper cycle experiment brought you back full circle. No matter what was done to the copper, the copper was always present in some form. In other words, it was not created or destroyed during the chemical transformations, but its form was changed during each step.

42. Over many centuries, scientists have gathered evidence that matter can never be destroyed or created through a chemical change—enough evidence that this is considered a scientific law. The law of conservation of mass states that mass cannot be gained or lost in a chemical reaction—that matter cannot be created or destroyed.

43. Properties of the Elements • As alchemists and chemists explored the world around them, they discovered a large number of elements. It became clear that these elements needed to be organized. In the late 1960’s, a Russian chemist and teacher named Dmitri Mendeleyev created his own organizational scheme by putting elements in groups based on similarities in their properties. Some of these properties are listed below. • Reactivity • Ratios in compounds • Atomic mass

44. Reactivity is a property that describes how easily an element will combine with other substances to form new compounds. An element that is highly reactive combines rapidly with other substances. For example, when metallic sodium comes into contact with water, it reacts vigorously.

45. Mendeleyev also paid attention to which elements combine with which, and he noted the ratios in which their atoms combine. For example, magnesium combines with chlorine in a 1:2 ratio, while sodium combines with chlorine in a 1:1 ratio. This means that magnesium and sodium must have similar reactivity (since both can combine with chlorine), but not exactly the same. Mendeleyev used another property--atomic mass--to sort the elements. Atomic mass is the mass of an atom, and it is measured in atomic mass units, or amu. The elements can be placed in order of their atomic masses. However, this alone does not tell you which elements are similar by properties.

46. Mendeleyev put the elements with similar reactivity and chemical formulas of compounds into columns. He also sorted them by atomic mass, from smallest to largest. This way, the elements in each column have similar physical properties and reactivity, and they tend to form compounds with other elements in the same ratios. This table became the foundation of the modern periodic table of elements.

47. The Periodic Table • Scientists have detected around 114 elements on the planet (there are about 118 total). Each element is unique, but groups of elements have similar properties.

48. Each element has a square on the periodic table. Within each square is information about that element including its name and symbol. The whole number (usually at the top of each square) is called the atomic number. The decimal number in each square on the periodic table is the average atomic mass in amu.

49. Most modern periodic tables have 18 vertical columns and 7 horizontal rows. The vertical columns are also called groups or families. The horizontal rows of the table are called periods because patterns repeat periodically (over and over again) in each row.

50. Chemists also have names for the sections of the periodic table. • The main group elements include groups 1A (alkali metals), 2A (alkaline earth metals), and 3A-8A (group 7A are the halogens, and group 8A are the noble gases). • The transition metals are in the middle of the periodic table. • The inner transition metals are below the periodic table. This section consists of the lanthanides and actinides.