1 / 30

Solar thermal and combined heat and power

Solar thermal and combined heat and power. Achintya Madduri , Mike He. Combined Opportunities:. Low-cost media – water, mineral oil, molten salts Heat engine ( eg . Stirling) provides high efficiency, eg . better than ~ 2/3 of reversible limit

china
Download Presentation

Solar thermal and combined heat and power

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Solar thermal and combined heat and power AchintyaMadduri, Mike He

  2. Combined Opportunities: • Low-cost media – water, mineral oil, molten salts • Heat engine (eg. Stirling) provides high efficiency, • eg. better than ~ 2/3 of reversible limit • Stirling converter enables excellent durability, cycle-ability (contrast with IC engine) Ex.1: Solar Thermal Electric System

  3. Stirling Engine • Can achieve large fraction (70%) of Carnot efficiency • Low cost possible for low temp design: • bulk metal and plastics • Simple components • Fuel (heat source !) Flexible • Reversible • Independent scalable engine and storage capacity • 25 kW systems (SES), MW scale designs proposed by Infinia

  4. Prototype 1: free-piston Gamma

  5. Prototype 2 – Multi-Phase “Alpha”

  6. Design Characterization

  7. CHP Design • Higher exit temperature (50 C) • Lower electrical efficiency • Higher system efficiency

  8. Collector and Engine Efficiency Collector with concentration G = 1000 W/m2 (PV standard) Schott ETC-16 collector Engine: 2/3 of Carnot eff. No Concentration

  9. Cost Comparison – no concentration Solar Thermal Photovoltaic With concentrator: expect substantial cost and area reduction due to efficiency increase Source: PV data from Solarbuzz

  10. Concentrator for Evacuated Tube Absorber • Conc. Ration C <= 1/sin(theta) • Can accept full sky radiation +/- 90 degrees on tubular absorber with aperture of Pi*D • Reduce # tubes by Pi • Insolation increased by ~Pi, results in substantially increased thermal efficiency and/or increased temperature

  11. Evacuated Tube Absorber

  12. Evacuated Tube Absorber

  13. Thermal Storage Example • Sealed, insulated water tank • Cycle through 50 C temperature swing • Thermal energy density of about 60 W-hr/kg, 60 W-hr/liter • Considering Carnot (~30%) and non-idealities in conversion (50-70% eff), remain with 10 W-hr/kg • Very high cycle capability • Cost is for container & insulator • Water to perhaps 200 C; mineral oil to 250-300 C

  14. Ex.: Co-generation with thermal storage Combustion-to meet electric demand (300 C ?) Electrical output On Demand Thermal-Electric Conversion Thermal Reservoir(s) 60 -100 C Thermal output on demand • One tank system: • cycle avg temp, or • thermocline • Two tank system Thermal-Electric conversion eff ~ >28% with high performance, longlife Stirling Converter

  15. Costs and Scale Potential of Distributed CHP • Thermal input to converter is perhaps 60-80% of combustion value without condensing heat exchanger, but perhaps >90% with condensing heat exchanger • Scale is substantial since 40,000 btu/hr thermal process in many homes translates to 13 kW thermal process, and to ~3 kWe generation at expected 25 % eff.: • 200M homes * 3kWe = 600 GWe

  16. Costs and Scale Potential of Distributed CHP Hot Water System • Cost Evaluation: • $14 per 1000 cubic-feet/1 million BTU/gigajoule • At 25% efficiency this translates to a pure electric cost of 20 cents per kW-hour • This electric generation comes with a bonus of 10,000 BTU of thermal energy per kWe-hr • Thermal Storage: • It take 35,000 BTU to heat a 60 gallon tank from 50° F to 120° F • For a reasonably sized, insulated water tank the loss due to conduction is 100 Btu/hr. Corresponds to a drop from 120° F to 115° F over 24 hours.

  17. Economic Analysis of CHP Hot Water System • For a Family of 4: 60-100 gallons/day of hot water. This requires 35,000-60,000 BTU of thermal energy which comes at a cost of 47,000-80,000 BTU/day ($0.66-$1.12 per day) with an electric production of 3.5-6 kWhe • In contrast a traditional system would cost $1.54-$3.64 per day with $0.30 per kWhe-hr electric cost • The corresponding savings per year would amount to ~$330-900 • The computed value includes use as a dispatchable source to opportunistically match peak prices.

  18. Electrical/Thermal Conversion and Storage Technology and Opportunities • Electricity Arbitrage – diurnal and faster time scales • LoCal market structure provides framework for valuation • Demand Charges avoided • Co-location with variable loads/sources relieves congestion • Avoided costs of transmission/distribution upgrades and losses in distribution/transmission • Power Quality – aids availability, reliability, reactive power • Islanding potential – controlling frequency, clearing faults • Ancilliary services – stability enhancement, spinning reserve

  19. Comparison of Water Heating Options “Consumer Guide to Home Energy Savings: Condensed Online Version” American Council for an Energy-Efficient Economy. August 2007. <http://www.aceee.org/Consumerguide/waterheating.htm >.

  20. Ex. 3: Waste heat recovery + thermal storage Waste heat stream 100-250 C or higher Thermal Reservoir Electric generation on demand Heat Engine Converter Domestic Hot Water ? • Huge opportunity in waste heat

  21. Thermal System Diagram

  22. Solar Dish: 2-axis track, focus directly on receiver (engine heat exchanger) Photo courtesy of Stirling Energy Systems.

  23. Stirling Cycle Overview 4 1 2 3

  24. Residential Example • 30 sqm collector => 3 kWe at 10% electrical system eff. • 15 kW thermal input. Reject 12 kW thermal power at peak. Much larger than normal residential hot water systems – would provide year round hot water, and perhaps space heating • Hot side thermal storage can use insulated (pressurized) hot water storage tank. Enables 24 hr electric generation on demand. • Another mode: heat engine is bilateral – can store energy when low cost electricity is available. Potential for very high cyclability.

  25. Gamma-Type Free-Piston Stirling Displacer Power piston • Temperatures: Th=175 oC, Tk=25 oC • Working fluid: Air @ ambient pressure • Frequency: 3 Hz • Pistons • Stroke: 15 cm • Diameter: 10 cm • Indicated power: • Schmidt analysis 75 W (thermal input) - 25 W (mechanical output) • Adiabatic model 254 W (thermal input) - 24 W (mechanical output)

  26. Prototype Operation

  27. Free-Piston “Gamma” Engine (Infinia) • Designed for > 600 C operation, deep space missions with radioisotope thermal source • Two moving parts – displacer and power piston, each supported by flexures, clearance seals • Fully sealed enclosure, He working fluid, > 17 year life • Sunpower (Ohio) has designs with non-contacting gas bearings

  28. Collector Cost – no concentration • Cost per tube [1] < $3 • Input aperture per tube 0.087 m2 • Solar power intensity G 1000 W/m2 • Solar-electric efficiency 10% • Tube cost $0.34/W • Manifold, insulation, bracket, etc. [2] $0.61/W • Total $0.95/W [1] Prof. Roland Winston, also direct discussion with manufacturer [2] communications with manufacturer/installer

  29. Related apps for eff. thermal conv • Heat Pump • Chiller • Refrigeration • Benign working fluids in Stirling cycle – air, helium, hydrogen

More Related