1 / 48

CS 267: Introduction to Parallel Machines and Programming Models

CS 267: Introduction to Parallel Machines and Programming Models. James Demmel demmel@cs.berkeley.edu www.cs.berkeley.edu/~demmel/cs267_Spr05. Outline. Overview of parallel machines and programming models Shared memory Shared address space Message passing Data parallel Clusters of SMPs

cherylscott
Download Presentation

CS 267: Introduction to Parallel Machines and Programming Models

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CS 267: Introduction to Parallel Machines and Programming Models James Demmel demmel@cs.berkeley.edu www.cs.berkeley.edu/~demmel/cs267_Spr05 CS267 Lecture 3

  2. Outline • Overview of parallel machines and programming models • Shared memory • Shared address space • Message passing • Data parallel • Clusters of SMPs • Grid • Trends in real machines CS267 Lecture 3

  3. A generic parallel architecture P P P P M M M M Interconnection Network Memory • Where is the memory physically located? CS267 Lecture 3

  4. Parallel Programming Models • Control • How is parallelism created? • What orderings exist between operations? • How do different threads of control synchronize? • Data • What data is private vs. shared? • How is logically shared data accessed or communicated? • Operations • What are the atomic (indivisible) operations? • Cost • How do we account for the cost of each of the above? CS267 Lecture 3

  5. Simple Example Consider a sum of an array function: • Parallel Decomposition: • Each evaluation and each partial sum is a task. • Assign n/p numbers to each of p procs • Each computes independent “private” results and partial sum. • One (or all) collects the p partial sums and computes the global sum. Two Classes of Data: • Logically Shared • The original n numbers, the global sum. • Logically Private • The individual function evaluations. • What about the individual partial sums? CS267 Lecture 3

  6. i: 5 i: 8 i: 2 Programming Model 1: Shared Memory • Program is a collection of threads of control. • Can be created dynamically, mid-execution, in some languages • Each thread has a set of private variables, e.g., local stack variables • Also a set of shared variables, e.g., static variables, shared common blocks, or global heap. • Threads communicate implicitly by writing and reading shared variables. • Threads coordinate by synchronizing on shared variables Shared memory s s = ... y = ..s ... Private memory P1 Pn P0 CS267 Lecture 3

  7. Shared Memory Code for Computing a Sum static int s = 0; Thread 1 for i = 0, n/2-1 s = s + f(A[i]) Thread 2 for i = n/2, n-1 s = s + f(A[i]) • Problem is a race condition on variable s in the program • A race condition or data race occurs when: • two processors (or two threads) access the same variable, and at least one does a write. • The accesses are concurrent (not synchronized) so they could happen simultaneously CS267 Lecture 3

  8. Shared Memory Code for Computing a Sum static int s = 0; Thread 1 …. compute f([A[i]) and put in reg0 reg1 = s reg1 = reg1 + reg0 s = reg1 … Thread 2 … compute f([A[i]) and put in reg0 reg1 = s reg1 = reg1 + reg0 s = reg1 … 7 9 27 27 34 36 34 36 • Assume s=27, f(A[i])=7 on Thread1 and =9 on Thread2 • For this program to work, s should be 43 at the end • but it may be 43, 34, or 36 • The atomic operations are reads and writes • Never see ½ of one number • All computations happen in (private) registers CS267 Lecture 3

  9. static lock lk; lock(lk); lock(lk); unlock(lk); unlock(lk); Improved Code for Computing a Sum static int s = 0; Thread 1 local_s1= 0 for i = 0, n/2-1 local_s1 = local_s1 + f(A[i]) s = s + local_s1 Thread 2 local_s2 = 0 for i = n/2, n-1 local_s2= local_s2 + f(A[i]) s = s +local_s2 • Since addition is associative, it’s OK to rearrange order • Most computation is on private variables • Sharing frequency is also reduced, which might improve speed • But there is still a race condition on the update of shared s • The race condition can be fixed by adding locks (only one thread can hold a lock at a time; others wait for it) CS267 Lecture 3

  10. Machine Model 1a: Shared Memory • Processors all connected to a large shared memory. • Typically called Symmetric Multiprocessors (SMPs) • Sun, HP, Intel, IBM SMPs (nodes of Millennium, SP) • Difficulty scaling to large numbers of processors • <32 processors typical • Advantage: uniform memory access (UMA) • Cost: much cheaper to access data in cache than main memory. P2 P1 Pn $ $ $ bus memory CS267 Lecture 3

  11. Problems Scaling Shared Memory • Why not put more processors on (with larger memory?) • The memory bus becomes a bottleneck • Example from a Parallel Spectral Transform Shallow Water Model (PSTSWM) demonstrates the problem • Experimental results (and slide) from Pat Worley at ORNL • This is an important kernel in atmospheric models • 99% of the floating point operations are multiplies or adds, which generally run well on all processors • But it does sweeps through memory with little reuse of operands, which exercises the memory system • These experiments show serial performance, with one “copy” of the code running independently on varying numbers of procs • The best case for shared memory: no sharing • But the data doesn’t all fit in the registers/cache CS267 Lecture 3

  12. Example: Problem in Scaling Shared Memory • Performance degradation is a “smooth” function of the number of processes. • No shared data between them, so there should be perfect parallelism. • (Code was run for a 18 vertical levels with a range of horizontal sizes.) CS267 Lecture 3 From Pat Worley, ORNL

  13. Machine Model 1b: Distributed Shared Memory • Memory is logically shared, but physically distributed • Any processor can access any address in memory • Cache lines (or pages) are passed around machine • SGI Origin is canonical example (+ research machines) • Scales to 100s (512 have been built) • Limitation is cache coherent protocols – need to keep cached copies of the same address consistent P2 P1 Pn $ $ $ network memory memory memory CS267 Lecture 3

  14. receive Pn,s s: 11 s: 14 s: 12 i: 1 i: 3 i: 2 send P1,s Programming Model 2: Message Passing • Program consists of a collection of named processes. • Usually fixed at program startup time • Thread of control plus local address space -- NO shared data. • Logically shared data is partitioned over local processes. • Processes communicate by explicit send/receive pairs • Coordination is implicit in every communication event. • MPI is the most common example Private memory y = ..s ... P1 Pn P0 Network CS267 Lecture 3

  15. Second possible solution Processor 2 xloadl = A[2] receive xremote, proc1 send xlocal, proc1 s = xlocal + xremote Processor 1 xlocal = A[1] send xlocal, proc2 receive xremote, proc2 s = xlocal + xremote Computing s = A[1]+A[2] on each processor • First possible solution – what could go wrong? Processor 1 xlocal = A[1] send xlocal, proc2 receive xremote, proc2 s = xlocal + xremote Processor 2 xlocal = A[2] send xlocal, proc1 receive xremote, proc1 s = xlocal + xremote • If send/receive acts like the telephone system? The post office? CS267 Lecture 3

  16. MPI – the de facto standard In 2002 MPI has become the de facto standard for parallel computing The software challenge: overcoming the MPI barrier • MPI created finally a standard for applications development in the HPC community • Standards are always a barrier to further development • The MPI standard is a least common denominator building on mid-80s technology Programming Model reflects hardware! • “I am not sure how I will program a Petaflops computer, but I am sure that I will need MPI somewhere” – HDS 2001 CS267 Lecture 3

  17. P1 NI P0 NI Pn NI memory memory memory . . . interconnect Machine Model 2a: Distributed Memory • Cray T3E, IBM SP2 • PC Clusters (Berkeley NOW, Beowulf) • IBM SP-3, Millennium, CITRIS are distributed memory machines, but the nodes are SMPs. • Each processor has its own memory and cache but cannot directly access another processor’s memory. • Each “node” has a network interface (NI) for all communication and synchronization. CS267 Lecture 3

  18. Tflop/s Clusters The following are examples of clusters configured out of separate networks and processor components • Barcelona: 4th fastest in world (20 Tflop on Top500 Nov 2004; 4,536 2.2GHz IBM Power PC970s + Myrinet) • Shell: largest commercial engineering/scientific cluster • NCSA: 1024 processor cluster (IA64) • Univ. Heidelberg cluster • PNNL: announced 8 Tflops (peak) IA64 cluster from HP with Quadrics interconnect • DTF in US: announced 4 clusters for a total of 13 Teraflops (peak) CS267 Lecture 3

  19. Machine Model 2b: Internet/Grid Computing • SETI@Home: Running on 500,000 PCs • ~1000 CPU Years per Day • 485,821 CPU Years so far • Sophisticated Data & Signal Processing Analysis • Distributes Datasets from Arecibo Radio Telescope Next Step- Allen Telescope Array CS267 Lecture 3

  20. i: 5 i: 8 i: 2 Programming Model 2b: Global Addr Space • Program consists of a collection of named threads. • Usually fixed at program startup time • Local and shared data, as in shared memory model • But, shared data is partitioned over local processes • Cost models says remote data is expensive • Examples: UPC, Titanium, Co-Array Fortran • Global Address Space programming is an intermediate point between message passing and shared memory Shared memory s[n]: 27 s[0]: 27 s[1]: 27 y = ..s[i] ... Private memory s[myThread] = ... P1 Pn P0 CS267 Lecture 3

  21. P1 NI P0 NI Pn NI memory memory memory . . . interconnect Machine Model 2c: Global Address Space • Cray T3D, T3E, X1, and HP Alphaserver cluster • Clusters built with Quadrics, Myrinet, or Infiniband • The network interface supports RDMA (Remote Direct Memory Access) • NI can directly access memory without interrupting the CPU • One processor can read/write memory with one-sided operations (put/get) • Not just a load/store as on a shared memory machine • Remote data is typically not cached locally Global address space may be supported in varying degrees CS267 Lecture 3

  22. A: f fA: sum Programming Model 3: Data Parallel • Single thread of control consisting of parallel operations. • Parallel operations applied to all (or a defined subset) of a data structure, usually an array • Communication is implicit in parallel operators • Elegant and easy to understand and reason about • Coordination is implicit – statements executed synchronously • Similar to Matlab language for array operations • Drawbacks: • Not all problems fit this model • Difficult to map onto coarse-grained machines A = array of all data fA = f(A) s = sum(fA) s: CS267 Lecture 3

  23. P1 P1 P1 P1 P1 NI NI NI NI NI memory memory memory memory memory Machine Model 3a: SIMD System • A large number of (usually) small processors. • A single “control processor” issues each instruction. • Each processor executes the same instruction. • Some processors may be turned off on some instructions. • Machines are very specialized to scientific computing, so they are not popular with vendors (CM2, Maspar) • Programming model can be implemented in the compiler • mapping n-fold parallelism to p processors, n >> p, but it’s hard (e.g., HPF) control processor . . . interconnect CS267 Lecture 3

  24. Machine Model 3b: Vector Machines • Vector architectures are based on a single processor • Multiple functional units • All performing the same operation • Instructions may specific large amounts of parallelism (e.g., 64-way) but hardware executes only a subset in parallel • Historically important • Overtaken by MPPs in the 90s • Re-emerging in recent years • At a large scale in the Earth Simulator (NEC SX6) and Cray X1 • At a small sale in SIMD media extensions to microprocessors • SSE, SSE2 (Intel: Pentium/IA64) • Altivec (IBM/Motorola/Apple: PowerPC) • VIS (Sun: Sparc) • Key idea: Compiler does some of the difficult work of finding parallelism, so the hardware doesn’t have to CS267 Lecture 3

  25. … … … … vr1 vr2 vr2 vr1 vr3 + + + + + + + Vector Processors • Vector instructions operate on a vector of elements • These are specified as operations on vector registers • A supercomputer vector register holds ~32-64 elts • The number of elements is larger than the amount of parallel hardware, called vector pipes or lanes, say 2-4 • The hardware performs a full vector operation in • #elements-per-vector-register / #pipes r1 r2 + (logically, performs # elts adds in parallel) r3 (actually, performs # pipes adds in parallel) CS267 Lecture 3

  26. S S S S V V V V V V V V 51 GB/s 0.5 MB $ 0.5 MB $ 0.5 MB $ 0.5 MB $ Cray X1 Node • Cray X1 builds a larger “virtual vector”, called an MSP • 4 SSPs (each a 2-pipe vector processor) make up an MSP • Compiler will (try to) vectorize/parallelize across the MSP custom blocks 12.8 Gflops (64 bit) 25.6 Gflops (32 bit) 25-41 GB/s 2 MB Ecache At frequency of 400/800 MHz To local memory and network: 25.6 GB/s 12.8 - 20.5 GB/s CS267 Lecture 3 Figure source J. Levesque, Cray

  27. Cray X1: Parallel Vector Architecture Cray combines several technologies in the X1 • 12.8 Gflop/s Vector processors (MSP) • Shared caches (unusual on earlier vector machines) • 4 processor nodes sharing up to 64 GB of memory • Single System Image to 4096 Processors • Remote put/get between nodes (faster than MPI) CS267 Lecture 3

  28. Earth Simulator Architecture • Parallel Vector Architecture • High speed (vector) processors • High memory bandwidth (vector architecture) • Fast network (new crossbar switch) Rearranging commodity parts can’t match this performance CS267 Lecture 3

  29. Machine Model 4: Clusters of SMPs • SMPs are the fastest commodity machine, so use them as a building block for a larger machine with a network • Common names: • CLUMP = Cluster of SMPs • Hierarchical machines, constellations • Most modern machines look like this: • Millennium, IBM SPs, ASCI machines • What is an appropriate programming model #4 ??? • Treat machine as “flat”, always use message passing, even within SMP (simple, but ignores an important part of memory hierarchy). • Shared memory within one SMP, but message passing outside of an SMP. CS267 Lecture 3

  30. Outline • Overview of parallel machines and programming models • Shared memory • Shared address space • Message passing • Data parallel • Clusters of SMPs • Trends in real machines CS267 Lecture 3

  31. TOP500 - Listing of the 500 most powerful Computers in the World - Yardstick: Rmax from Linpack Ax=b, dense problem - Updated twice a year: ISC‘xy in Germany, June xy SC‘xy in USA, November xy - All data available from www.top500.org TPP performance Rate Size CS267 Lecture 3

  32. TOP500 list - Data shown • Manufacturer Manufacturer or vendor • Computer Type indicated by manufacturer or vendor • Installation Site Customer • Location Location and country • Year Year of installation/last major update • Customer Segment Academic,Research,Industry,Vendor,Class. • # Processors Number of processors • Rmax Maxmimal LINPACK performance achieved • Rpeak Theoretical peak performance • Nmax Problemsize for achieving Rmax • N1/2 Problemsize for achieving half of Rmax • Nworld Position within the TOP500 ranking CS267 Lecture 3

  33. 22nd List: The TOP10 (2003) CS267 Lecture 3

  34. Continents Performance CS267 Lecture 3

  35. Continents Performance CS267 Lecture 3

  36. Customer Types CS267 Lecture 3

  37. Manufacturers CS267 Lecture 3

  38. Manufacturers Performance CS267 Lecture 3

  39. Processor Types CS267 Lecture 3

  40. Architectures CS267 Lecture 3

  41. NOW – Clusters CS267 Lecture 3

  42. Analysis of TOP500 Data • Annual performance growth about a factor of 1.82 • Two factors contribute almost equally to the annual total performance growth • Processor number grows per year on the average by a factor of 1.30 and the • Processor performance grows by 1.40 compared to 1.58 of Moore's Law Strohmaier, Dongarra, Meuer, and Simon, Parallel Computing 25, 1999, pp 1517-1544. CS267 Lecture 3

  43. Summary • Historically, each parallel machine was unique, along with its programming model and programming language. • It was necessary to throw away software and start over with each new kind of machine. • Now we distinguish the programming model from the underlying machine, so we can write portably correct codes that run on many machines. • MPI now the most portable option, but can be tedious. • Writing portably fast code requires tuning for the architecture. • Algorithm design challenge is to make this process easy. • Example: picking a blocksize, not rewriting whole algorithm. CS267 Lecture 3

  44. Reading Assignment • Extra reading for today • Cray X1 http://www.sc-conference.org/sc2003/paperpdfs/pap183.pdf • Clusters http://www.mirror.ac.uk/sites/www.beowulf.org/papers/ICPP95/ • "Parallel Computer Architecture: A Hardware/Software Approach" by Culler, Singh, and Gupta, Chapter 1. • Next week: Current high performance architectures • Shared memory (for Monday) • Memory Consistency and Event Ordering in Scalable Shared-Memory  Multiprocessors, Gharachorloo et al, Proceedings of the International symposium on Computer Architecture, 1990. • Or read about the Altix system on the web (www.sgi.com) • Blue Gene L (for Wednesday) • http://sc-2002.org/paperpdfs/pap.pap207.pdf CS267 Lecture 3

  45. Extra Slides CS267 Lecture 3

  46. PC Clusters: Contributions of Beowulf • An experiment in parallel computing systems • Established vision of low cost, high end computing • Demonstrated effectiveness of PC clusters for some (not all) classes of applications • Provided networking software • Conveyed findings to broad community (great PR) • Tutorials and book • Design standard to rally community! • Standards beget: books, trained people, software … virtuous cycle Adapted from Gordon Bell, presentation at Salishan 2000 CS267 Lecture 3

  47. Open Source Software Model for HPC • Linus's law, named after Linus Torvalds, the creator of Linux, states that "given enough eyeballs, all bugs are shallow". • All source code is “open” • Everyone is a tester • Everything proceeds a lot faster when everyone works on one code (HPC: nothing gets done if resources are scattered) • Software is or should be free (Stallman) • Anyone can support and market the code for any price • Zero cost software attracts users! • Prevents community from losing HPC software (CM5, T3E) CS267 Lecture 3

  48. Cluster of SMP Approach • A supercomputer is a stretched high-end server • Parallel system is built by assembling nodes that are modest size, commercial, SMP servers – just put more of them together Image from LLNL CS267 Lecture 3

More Related