1 / 31

Zumdahl’s Chapter 17

Zumdahl’s Chapter 17. Electrochemistry: Making Charges Work. Galvanic Cells Cell Potential Std. Reduction Potential, E ° Electrical Work Potential and Free Energy, G. E ’s concentration dependence Nernst Equation K from E ° Batteries Corrosion Electrolysis. Chapter Contents.

chava
Download Presentation

Zumdahl’s Chapter 17

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Zumdahl’s Chapter 17 Electrochemistry: Making Charges Work

  2. Galvanic Cells Cell Potential Std. Reduction Potential, E° Electrical Work Potential and Free Energy, G E ’s concentration dependence Nernst Equation K from E° Batteries Corrosion Electrolysis Chapter Contents

  3. Electrochemistry • Conversion of chemical to electrical energy (discharge). • And its reverse (electrolysis). • Both subject to entropic caution: • Convert reversibly to keep systems at equilibrium and convert all available chemical work (G) to and from the equivalent electrical work (QV). • Electrons from REDOX reactions.

  4. RedOx Half Reactions • The e– are visible in ½ reactions. 3 H2O2 3 O2 + 6 H+ + 6 e– 2 Au3+ + 6 e– 2 Au 2 Au3+ + 3 H2O2 3 O2 + 6 H+ + 2 Au • But while ½ cells were a math convenience in stoichiometry, they are real in electrochemistry

  5. One ½ cell rxn. occurs in each compartment. Zn Zn2+ + 2e– in the anode. Cu2+ + 2e– Cu in cathode. But not without a connection. Cu Zn Galvanic Cells Cathode=Reduction Anode=Oxidation SO42– SO42– Zn2+ Cu2+ Zn + Cu2+ Zn2+ + Cu

  6. But even with a connection of the electrodes, no current flows. We need to allow neutrality in the solutions with a salt bridge to shift counterions. 2e– 2e– Ion (“salt”) Bridge Cu Zn SO42– SO42– Zn2+ Cu2+ Zn + Cu2+ Zn2+ + Cu

  7. Standard Reduction Potentials, E° • The voltage generated by the Zn/Cu galvanic cell is +1.1V under standard conditions. • Standard conditions are: • T = 25°C and P = 1 bar for gases. • Solids and liquids are pure. • Solutions are 1 M in all species. • E°cell is sum of ½ cell E° values.

  8. ½ cell Reduction Potentials • All ½ cells are catalogued as reduction reactions & assigned reduction potentials, E°. • The lower reduction potential ½ rxn is reversed to become the oxidation. E°oxidation = –E°reduction • That makes spontaneous E°cell > 0. • But E°red can’t be found w/o E°ox!

  9. Origin for Reduction Potentials • We had the same problem for S°ions and solved it by making H+ special. • 2H+(aq) + 2e– H2(1 bar) E°  0 V • 1 bar H2 flows over a Pt electrode, and the full E°cell is assigned to the other electrode. E°SHE = 0 V. • E.g., standard calomel electrode: • Hg2Cl2(s) + 2e– 2 Hg(l) + Cl–E°SCE = +0.27V • a more physically convenient reference.

  10. Ag+ + e–  Ag .80V Cu2+ + 2e–  Cu .34 2H+ + 2e–  H2 .00 Fe2+ + 2e–  Fe –.44 Zn2+ + 2e–  Zn –.76 Mg2+ + 2e–  Mg –2.37 Etc. Remember: reverse the lower potential to make it an oxidation instead of a reduction. A cursory glance at the standard reduction E°s at left tells us why Cu is immune to 1 M HCl while metals with lower E° merrily bubble off H2. Active Metal Series

  11. Cu isn’t immortal H+ doesn’t do it. We fried that penny not with HCl but with HNO3. So HNO3 isn’t merely acid but oxidizing acid! Cu2+ + 2e–  Cu has E° = +0.34V NO3– + 4H+ + 3e– NO + H2O has E° = + 0.96V So reversing the Cu and adding HNO3 gives a cell E° = + 0.62 V Corroding Copper

  12. Galvanic Line Notation • Shorthand for a complete redox cell is of the form: • Anode | anodic soln. || cathodic soln. | Cathode • but written all on the same line. • So making a cell of Cu corrosion, • Cu | Cu2+ || NO3–, NO(g), H+ |Pt • where all ions should be suffixed (aq) and both metals should have (s).

  13. Free Energy and Work • Were all (aq) concentrations in the Cu corrosion cell at 1 M, the cell potential would be + 0.62V (spontaneous). • Spontaneous reactions have negativeG° = max (non-PV) work. • Electrical work = chargepotential • ne moles of e– carry neF Coulombs. •  G° = –neF E° J ( J = C V ) • F = 96,485 C mol–1, the Faraday const.

  14. Temperature Dependence of E° • Since E° = – G° /n F, • and E = –G /n F for that matter, • dE/ dT = ( –1 / n F ) dG / dT • But dG = VdP – SdT, so dG/dT = – S • Or dE / dT = + S / n F  S° / n F • where we’ve presumed that neither S nor H will change much with moderate T. • Since S° = + 124 J/mol K for a car battery, it’s harder to start in winter. For 0°C, the 6 cell battery puts out 0.1V less than at 25°C

  15. Nernst Eqn: Potentials and Concentrations • Both G° and E° refer to unit (standard) concentrations. • But at equilibrium, G = 0 and the cell potential E = 0 as well (see no °). • G = G° + RT ln(Q)  – neFE = – neFE° + RT ln(Q) E = E° – 2.303 (RT/neF) log(Q) • E = E° – (59.1 mV/ne) log(Q) @ 25°C

  16. K from E° • Just as G = G° + RT ln(K) = 0 implies G° = – RT ln(K), • – neF E° = – RT ln(K) implies • K = e+neF E° / RT • where, as before, ne = moles of electrons involved in the overall reaction as written! • Very large K can be calculated.

  17. Confession Time • On slide 9, I touted the Hg2Cl2/Hg couple as a convenient standard and drew its E° from the table. • But S.C.E. stands for “saturated” calomel electrode and E = 0.241 not E° = 0.268 V (with saturated Cl–) . • Since Q = [Cl–], by inverting Nernst, we find [Cl–]sat’d = 2.86 M. Cool.

  18. Potential from a SINGLE ½ Reaction?!? • Don’t we need an oxidation as well as a reduction? • Yes, but they can be the same reaction (but for a reversal)! • Concentrationsmust differ between the anode and cathode. • I.e., Q must less be than 1 so log(Q) is negative; then although E°=0 still E >0. • The cell brings Q to 1 at equilibrium by equalizing concentrations in ½ cells.

  19. Ion-selective Electrodes • [Ag+] can be obtained by E from simple Ag wire referred to SCE. • [H+] is much more important! • pH electrodes, enclosed in glass, swap H+ for Na+ at silicate surface. • Potential difference thus induced is calibrated for [H+]external. • See your Harris § 15.4 for details.

  20. Assaulted with Batteries • “Battery” refers to a series of Galvanic cells whose E add. • (Parallel hookup adds current, I, not E.) • Rechargeable NiCad reactions: Cd + 2 OH– Cd(OH)2 + 2e– NiO2 + 2H2O + 2e– Ni(OH)2 + 2 OH– Notice the cancellation of OH– in final reaction.  Q=1 always so E fixed! It doesn’t run down; it just stops.

  21. Better Batteries • NiCad, though rechargeable, will accept progressively smaller charges; “battery memory.” • NiMH replaces anode rxn with • MH + OH– M + H2O + e– • with a much longer recharge life. • M might be Mg2Ni with  = 4.1 and effective H densitytwice H2(liquid)

  22. Best Battery • OK, I’m prejudiced. E° 2 H2 + 4 OH– 4 H2O + 4 e– +0.83V O2 + 2 H2O + 4 e–  4 OH– +0.40V • Is nothing more than hydrogen combustion; no Greenhouse gas. • Best example of “fuel cell” • so called because H2 and O2 are not built into the battery but supplied externally. • Notice that [OH–] is again unchanging.

  23. Corrosion • A battery is electrochemistry happening where you want it. • Corrosion is where you don’t. • All M/MOx couples at E° < 0.4V are corroded even in caustic solutions: • O2 + 2 H2O + 4 e– 4 OH–E° = 0.40 • O2 + 4 H+ + 4 e– 2 H2O E° = 1.23 • So acid does even better. Q effect!

  24. Metal Corrosion • Metal oxides are lower density (higher volume) than their metals. • So oxide formation opens blossoms of corrosion and spreads. • Salt spray is worst; it’s electrolytic! • Some oxides (e.g., Cr2O3) form impervious oxide coats, slowing further O2 attack.

  25. Sacrificial Anodes Mg  Mg2+ + 2e– O2 + 2H2O + 4e–  4 OH– • Structural metals like Fe are perfectly protected by more active (lower E°) metals like Mg. • If conductive contact is made, O2 gets reduced (to H2O) on Fe by e– released from Mg instead. • Replacing the active metal plate is cheaper than a rusted ship!

  26. Electromotive Force as a “Chemical Reactant” • If instead of doing work with a Galvanic cell potential, you supply a reverse potential, you run the reaction in the non-spontaneous direction! Uphill. Endoergically. • This is electrolysis, a synthesis. • You supply E not e–; the e– are taken from a cathode reaction, but anode and cathode have swapped.

  27. Electrolysis can only proceed with a potential more negative than –E°. Then the cell runs in reverse. External work supplies needed G. 2e– 2e– + Electrolysis Cell Cu Zn SO42– SO42– Zn2+ Cu2+ Zn + Cu2+ Zn2+ + Cu

  28. Electrolytic Stoichiometry • Charge ( current  time = I  t ) determines amount of product. • (Coulombs = Amperes  Seconds) • Electrons are the limiting reactant in electrolysis. • Moles electrons = ne = Q/F = It/F • The usual stoichiometric ratios convert between ne and moles of product.

  29. Concentration Electrolysis? • Does it make any sense to run a concentration cell backwards? • All you seem to do is to create a concentration difference rather than exploiting one that tends to uniformity. • This is the way we purify metals! • Force impure metals to be anodes. • They shed ions that are “plated” as pure metal on the cathodes!

  30. Making Active Metals • You can’t “plate” Na, say, out of an aqueous solution! • It will simply redox react with H2O to make NaOH(aq). • We electrolyze active metals from their melts (which conduct). • 2 NaCl(liq)  2 Na(liq) + Cl2(g) • Al2O3(liq) + 3C  2 Al(liq) + 3 CO2(g) • 5% of all U.S. electricity goes here!

  31. Recharging your Car • As the engine runs, a dynamo (i.e., reverse motor) generates a voltage to reverse battery drain from ignition. • 2PbSO4 + 2H2O  Pb + PbO2 + 2H2SO4 • And it takes about 20 km of driving to recharge after an average ignition. • With many shorter trips, the battery will die, necessitating an external recharge whose voltage will reduce H+ ion to H2 too. • Sparks from disconnect may detonate H2!

More Related