1 / 18

Stability of instruments at the ESRF

Stability of instruments at the ESRF. Y.Dabin Head of mechanical engineering ESRF - Grenoble. Vibration stability Thermal stability. With contribution of : Ph.Marion, L. Zhang, M.Lesourd,R.BAker, F.Pollack, JM.Dubuisson, JL.Marlat(Soleil). ESRF Upgrade

Download Presentation

Stability of instruments at the ESRF

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Stability of instruments at the ESRF Y.Dabin Head of mechanical engineering ESRF - Grenoble Vibration stability Thermal stability With contribution of : Ph.Marion, L. Zhang, M.Lesourd,R.BAker, F.Pollack, JM.Dubuisson, JL.Marlat(Soleil)

  2. ESRF Upgrade CDR issues about technical difficulties 100% of BL raised The following issues: 1 Better optic quality 2 Preserve beam coherence 3 Operation with High heat load 4 Better Vibration Stability 5 Better Thermal stab. (drifts – 24H – uniform) 6 High Precision – High resolution

  3. Support table...final design High stiffness…………………………….K Integrated damping (many frictions)…e Mass damping…………………………...M 1.5 m 4.5 m Transmission e K M 50 Frequency Motorised Z mvt Wide spread -> damping Horizontal Vib. Floor

  4. Stability Minimum Degree of Freedom 2 Incidences 2 curvatures Should be Kept

  5. 1 mm FZP Magnified Image of the KB focal plane Effective pixel-size = 12 nm !Realtime visualisation possible The ultimate beam monitor FReLoNOptics KB X-ray Magnification = 56 FZP Peak to peak movements (through cross-correlation) 7 nm (vertical) 3 nm (horizontal) E = 9 keVKB aperture: 0.27 mm x 0.75 mmsecondary source open (0.5 mm)integration time: 1 s (full range FReLoN) W Ludwig, P Cloetens

  6. New high flow rate air conditioning units ID22 – Nano-Imaging-Fluorescence Air renewal rate: 20 cycles / hour Vibrations from air flow reduced by porous ducts At present: 3 Nano-Hutches Next Upgrade : 15 Nano-Hutches

  7. Typical focusing optic sensitivity Support table: Do we need antivib system under table support ? Spot size: 100 nm Stability : 10% d = 10nm q =0.1 m p =100 m source to optic Acceptable movements for the table sytem: Radial : Dz = d . p/q Acceptable Dz = ± 10 µm Dq Dz Angular : Dq = d /q Acceptable Dq = ± 0.1 µrd Angular vib.drifts much more critical than linear Transmitting floor vib. ( pv: 1µm ) seems acceptable

  8. ID19 microfocusing experiment E = 24KeV F = 80 mm WD = 50 mm = 5.5 mrd Source ID19 Focus Focus detection Graded ML Aperture slits Curved graded ML Beam Dynamical bender

  9. Vibrations influence XBPM and wavefront optimization camera Camera noise estimate = 3 nm Vib. origin to be analysed Radial / angular ? Courtesy of O.Hignette

  10. Optic support from Desir beamline soleil Design: F.Pollack, JM.Dubuisson (Soleil )

  11. Ultimate BPM All granite built-in movements ID 22 Nano-Imaging transmission µscope Present Spot size 80 nm

  12. ID13 next Nano-focus End-station Service gantry Manipulation Alignment Mecartec tripod Cabling table assistance

  13. Thermal stability  minimizing the spectral with for the precision monochromator Precision mono ML mirrors (fixed exit ) 0.01 – 1 eV Monochromator 200 – 2000 eV bandwith High rate cooling Angular Radial Substrat supply

  14. End show for the Wednesday working group

More Related