1 / 24

CE En 112 Engineering Drawing with CAD Application

CE En 112 Engineering Drawing with CAD Application. Chapter 2: Sketching and Text (Lecture D) Pictorial Drawings. Lecture Outline. Objectives Introduction (2.4, p.85) Isometric drawings (2.4.1, p.87) Oblique drawings (2.4, p.86) Perspective drawings (2.7, p.104) Next class. Objectives.

cera
Download Presentation

CE En 112 Engineering Drawing with CAD Application

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CE En 112 Engineering Drawing with CAD Application Chapter 2: Sketching and Text (Lecture D) Pictorial Drawings

  2. Lecture Outline • Objectives • Introduction (2.4, p.85) • Isometric drawings (2.4.1, p.87) • Oblique drawings (2.4, p.86) • Perspective drawings (2.7, p.104) • Next class

  3. Objectives • Learn how to construct three types of pictorial drawings: 1) Isometric 2) Oblique 3) Perspective

  4. Introduction • Comparison of Isometric, oblique, and perspective drawings

  5. Perspective Oblique Introduction (con’t) • Examples:

  6. Isometric Drawings (2.4) • An axonometric pictorial drawing for which the angle between axes equals 120 degrees and the scale used is full scale • Isometric axes can be positioned in a number of ways to create different views of the same object • Regular isometric is the most common type

  7. Isometric Drawings (con’t) • True length distances can only be measured along isometric lines, that is, lines that run parallel to any of the isometric axes

  8. Hidden lines are omitted unless absolutely necessary to describe the object Center lines are drawn for showing symmetry or for dimensioning – normally they are not shown Isometric Drawings (con’t) Example: Center Lines for Dimensioning Example: Hidden Lines Necessary for Details

  9. Isometric Drawings (con’t) • Dimensioning for production purposes: • Dimensions per ANSI standards • Dimension lines, extension lines, and lines dimensioned shall lie in the same plan • All dimensions and notes should be unidirectional, reading from the bottom upward and outside the view

  10. Isometric Drawings (con’t) • Dimensioning for illustration purposes: • Use the aligned method • Dimension lines, extension lines, and lettering are all draw in the plane of one of the faces of the object • Takes on more of a pictorial look

  11. Isometric Drawings (con’t) • Constructing an isometric drawing using the Boxing-In Method: Box in from the outmost shape to inside details

  12. Isometric Drawings (con’t) • What if you have non-isometric lines? Remember that true-length distances can only be measured along isometric lines, that is, lines that run parallel to any of the isometric axes

  13. Isometric Drawings (con’t) • What if you have curves? • Use the offset coordinate method

  14. Oblique Drawings (2.4) • A form of pictorial drawing in which the most descriptive or natural view is treated as the front view and is placed parallel to the plane of projection • Typical oblique drawing angles are 30, 45, or 60 degrees from the horizontal

  15. Oblique Drawings (con’t) • Three basic types of oblique drawings: • Cavalier: drawn true length along the receding axis • Cabinet: drawn half the true length along the receding axis • General: drawn anywhere from full to half length along the receding axis

  16. Oblique Drawings (con’t) • In oblique projection, the object face that is placed parallel to the frontal plane will be drawn true size and shape • Thus, the first rule in creating an oblique drawing is to place complex features (i.e., arcs, holes, or irregular surfaces) parallel to the frontal plane

  17. Oblique Drawings (con’t) • In oblique drawings, dimensions lie in the plane of the surface to which they apply, and unidirectional text placement is used Dimension text may need to be changed because only the cavalier oblique projection gives true depth.

  18. Creating an Oblique sketch: Step 1: Block in the front face of the object. Estimate distances to create a proportioned sketch Step 2: Sketch depth construction lines at 30 to 45 degrees. Estimate depth along the sketched lines Step 3: Draw a line between each depth mark to create the back edge Step 4: Darken all visible lines including any part of a back circle that is inside a front circle Oblique Drawings (con’t)

  19. Perspective Drawings (2.7) • Pictorial drawings used to represent 3-D forms on 2-D media in a manner closest to how we perceive the objects with our eyes • Terms to be familiar with include horizon line (HL), ground line (GL), station point (SP), picture plane (projection plane), and vanishing point (VP)

  20. Perspective Drawings (con’t) • The view of the object can be dramatically changed by moving the vanishing point along the horizon line • Points to the right of center will reveal details about the right side of the object; while points to the left of center will reveal details about the left side

  21. The human’s eye view is the most commonly used for sketching everyday objects The position of the view has a dramatic effect on the representation of the drawing Perspective Drawings (con’t)

  22. Perspective view drawings can be one-, two-, or three-point perspectives Four variables to consider in perspective view drawings: Distance of object from picture plane Position of station point Position of ground line Number of vanishing points Perspective Drawings (con’t) Practice creating a one-point perspective sketch (Fig. 2.54 in text)

  23. Perspective Drawings (con’t)

  24. Next Class • Section Views • MD HW3 will be assigned.

More Related