1 / 26

Aerodynamics of Flow Around a Cylinder

Aerodynamics of Flow Around a Cylinder. EML 4304L – Thermal Fluids LaBoratory spring 2017 T/TR 9:30AM – 10:51AM. Lab 3 – Flow Around a Circular Cylinder. Prediction of Drag from Wake Measurements. Goals/Tasks: Introduction to multiple forms of pressure sensors

cedricn
Download Presentation

Aerodynamics of Flow Around a Cylinder

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Aerodynamics of Flow Around a Cylinder EML 4304L – Thermal Fluids LaBoratory spring 2017 T/TR 9:30AM – 10:51AM

  2. Lab 3 – Flow Around a Circular Cylinder Prediction of Drag from Wake Measurements • Goals/Tasks: • Introduction to multiple forms of pressure sensors • Use conservation of momentum to calculate drag • Approximation of drag from numerical integration of surface pressure • Conduct velocity measurements in a wind tunnel using • Pitot-static probes • Analog output pressure sensors • Understand Reynolds number regimes • Error Analysis Prediction of Drag from Surface Pressure Measurements AERODYNAMICS OF FLOW AROUND A CYLINDER

  3. Motivation Scaled Beetle Robinson Crusoe Islands off coast of Chile BurjKhalifa – 2717 ft Tall Sways 2m at top AERODYNAMICS OF FLOW AROUND A CYLINDER

  4. Objective Flow separation To determine the aerodynamic lift and drag forces, FL and FD, respectively, experienced by a circular cylinder placed in a uniform free-stream velocity, U∞ Whenever there is relative motion between a solid body and the fluid in which it is immersed, the body experiences a net force, F,due to the action of the fluid. Drag is the component of force on a body acting parallel to direction of motion. Lift is the component of resultant force perpendicular to the fluid motion. AERODYNAMICS OF FLOW AROUND A CYLINDER

  5. Reynolds Number Must satisfy geometric similarity in order to use Reynolds and Mach number scaling. The limit for air which flow can be considered incompressible , Reynolds Number Mach Number

  6. Forces on a model The resultant force F is resolved into its components, parallel and perpendicular to the direction of motion, FD (Drag) and FL (Lift). Forces exerted on the model due to pressure acts normal to the surface. Shear force acts tangential to the surface AERODYNAMICS OF FLOW AROUND A CYLINDER

  7. Drag Forces Drag is the component of force on a body acting parallel to the direction of motion Total Drag = Pressure Drag + Friction Drag Caused by: Shear stress Caused by: Pressure Differences Consider uniform flow over a flat plate: Laminar Transition Turbulent AERODYNAMICS OF FLOW AROUND A CYLINDER

  8. Drag Forces: Friction Drag For a uniform flow over a flat plate, the pressure gradient is zero. Drag is only a function of the shear stress. where Laminar Transition Turbulent AERODYNAMICS OF FLOW AROUND A CYLINDER

  9. Drag Forces: Pressure Drag Wake Low pressure Consider flow over a flat plate normal to flow : High pressure Wall shear stress does not contribute to drag force in this case The pressure gradient across the model causes form drag AERODYNAMICS OF FLOW AROUND A CYLINDER

  10. Flow over a cylinder and sphere In case of flow over sphere or cylinder both friction drag and pressure drag contribute to total drag Thin front boundary layer Outer stream grossly perturbed by broad flow separation and wake What would the stream pattern for an inviscid flow resemble? Source : F.M. White AERODYNAMICS OF FLOW AROUND A CYLINDER Source : FM White

  11. Favorable and Adverse Pressure Gradients Flow converges Consider flow over a curved surface: Adverse Pressure Gradient Favorable Pressure Gradient – decreases – increases – increases – decreases Flow diverges Downstream of the highest point streamlines diverge resulting in a decrease in velocity (flow decelerates) and a rise in pressure. Upstream of the highest point of the surface flow converges and velocity increases (flow accelerates). Pressure decreases. AERODYNAMICS OF FLOW AROUND A CYLINDER

  12. Boundary Layer Profiles in Favorable and Adverse Pressure Gradients Source: Kundu & Cohen is favorable pressure gradient (flow from high pressure to low pressure) is adverse pressure gradient (flow from low pressure to high pressure) AERODYNAMICS OF FLOW AROUND A CYLINDER

  13. Flow Separation: The Boundary Layer Flow is on the verge of separation when In such a case, the fluid layer near the solid surface will also brought to zero velocity. Flow is deflected off from the surface and the flow is now ‘separated’ AERODYNAMICS OF FLOW AROUND A CYLINDER

  14. Flow Separation Boundary layer in a decelerating stream has a point of inflectionI, and grows rapidly. The point of inflection implies slowing down of fluid layer next to wall, a consequence of adverse pressure gradient. Under a strong adverse pressure gradient, the flow next to the wall reverses direction resulting in a region of backward flow The reversed flow meets the forward flow at some point S, at which the fluid near the surface is transported out into the mainstream or the ‘ flow is separated’ The separation point S is defined as the boundary between the forward flow and backward flow of the fluid near the wall where the shear stress vanish AERODYNAMICS OF FLOW AROUND A CYLINDER

  15. Force Coefficients Aerodynamic forces on a model are often expressed in terms of the non-dimensional force coefficients. Here, the forces are non-dimensionalized by the product of the dynamic pressure ( ) and frontal area ( ). Prism Airfoil Flat Plate Bullet Sphere All objects above have the same frontal area. AERODYNAMICS OF FLOW AROUND A CYLINDER

  16. Streamlining: Effect on Drag (a) Rectangular cylinder (b) Rounded nose (d) Circular cylinder with same drag as case (c) (c) Round nose and streamlined trailing edge Streamlining is extremely important in reducing drag of a bluff body Source : F.M. White AERODYNAMICS OF FLOW AROUND A CYLINDER

  17. Streamlining in the Automotive Industry Source : Hucho (1984) Side skirts and TrailerTail Tesla Model S AERODYNAMICS OF FLOW AROUND A CYLINDER

  18. Flow Over a Cylinder: Surface Pressure Distribution The pressure distribution over the cylinder surface is measured at points 1-15 Drag per unit length Lift per unit length AERODYNAMICS OF FLOW AROUND A CYLINDER

  19. Flow Over a Cylinder: Surface Pressure Distribution For inviscid flow: Coefficient of pressure AERODYNAMICS OF FLOW AROUND A CYLINDER

  20. Pressure Distribution on surface of Cylinder AERODYNAMICS OF FLOW AROUND A CYLINDER

  21. Lab 3 – Flow Around a Circular Cylinder Potential Flow – Inviscid (No Shear) Laminar Flow (Re=40) AERODYNAMICS OF FLOW AROUND A CYLINDER

  22. Lab 3 – The Drag Coefficient and Flow Structure At low Re number, the reversed flow down stream of the point of separation forms part of a large steady vortex behind the surface Flow separation over a cylinder at different Re Source : Kundu and Cohen AERODYNAMICS OF FLOW AROUND A CYLINDER

  23. Lab 3 – Simulation of impulsively started flow Simulation courtesy of T.B. Davis AERODYNAMICS OF FLOW AROUND A CYLINDER

  24. Lab 3 – The Drag Coefficient and Flow Structure For a steady flow: Measure the velocity profile in the wake – Use conservation of linear momentum The drag force experienced by the cylinder can be determined from this AERODYNAMICS OF FLOW AROUND A CYLINDER

  25. Section II II This is true if the pressure at locations 1 and 2 are same i.e. (1) Which is true for a cross section far downstream (section I) W is width of body 100d Section I (Hypothetical) d I The actual wake profile is measured at section II close the cylinder Assuming no pressure drop between section I and II, ( total pressure is same) and using equation of continuity a relation can be established between u1(x) and u2(x)

More Related