1 / 34

Advances in Plural-Component Equipment Technology

Explore the advancements in two-component equipment for protective coatings applications, including improved ratio assurance systems and dosing technology. Learn about the benefits and considerations when selecting two-component equipment.

cblair
Download Presentation

Advances in Plural-Component Equipment Technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Advances in Plural-Component Equipment Technology Eric RennerfeldtProduct Marketing ManagerGraco Inc. May 1, 2013

  2. Agenda

  3. Protective Coatings Applications • Shipyards • Rail shops • Tank linings • Oil and gas facilities • Offshore platforms • Steel fabrication • Pipe coating

  4. Plural Component Protective Coatings • Two-Part Materials • Two-part epoxies • Two-part urethanes • Hybrid, quick setting urethanes • Polyureas

  5. Reasons for Hot-Potting • The majority of two-component materials are applied with single-component sprayers • Why? • Smaller up-front equipment investment • Easy to use • Comfort level • Some kits are pre-measured whichgives a level of confidence

  6. Single Component Sprayer • 1 motor drives 1 pump lower to pump pre-mixed material Air Motor Pump Lower Fluid outlet Fluid inlet

  7. Operation of a common 2-Ball Piston Pump Up stroke (Fill stroke) Piston ball checks Lower ball opens Fluid fills the pump 1st - ½ volume is pumped out Down stroke Lower ball checks Piston ball opens 2nd- ½ volume is pumped out

  8. Drawbacks of Hot-Potting • Chance for human error when measuring • Partial kits or forgetting to add the catalyst • High solvent costs • Requires more solvent to flush entire system • High labor costs • Especially for larger projects • Less Ergonomic • Physical strain when mixing

  9. Drawbacks of Hot-Potting • Coating performance • More solvent may be used to thin material and extend pot life • Solvent increases cure time, which reduces productivity • Hot-potting may not be suitable for the most advanced materials • Material waste • Throw away unused mixed material at end of day • Need to flush entire system before every break • Higher VOCs • More solvent in the environment

  10. Coatings are Evolving • Less solvent to help the environment • Faster cure times • Shorter pot life drives need for advanced equipment • Material advancements create better performing end product • Coating performancedrives demand for two-component equipment

  11. Advances in Two-Component Equipment Old Fixed-Ratio Systems New Fixed-Ratio Systems 2 legged system 2 material, 2 pumps Easier to understand • 3 legged systems • 2 materials, 3 pumps • More hardware, more difficult, more wear parts A B A A B

  12. Fixed Ratio Fluid Theory

  13. Advances in Two-Component Equipment • Importance of ratio assurance systems • Failure points will cause a change in pressure • Balanced A & B pressures are necessary for ratio assurance Piston shaft Throat seals Piston ball Piston seals Piston seat Cylinder wall Lower ball Lower ball seat Fluid supply

  14. Advances in Two-Component Equipment • Improved ratio assurance systems monitor both A and B pressures • Capable of preventing coating failures caused by: • Worn seals, plugged filters, running out of material, leaking valves, etc. • New systems are difficult to bypass until problem is fixed

  15. Dosing Technology (Variable Ratio Systems) A and B dosing

  16. Dosing Technology (Variable Ratio Systems) A metering valve B metering valve Mix manifold

  17. Dosing Technology Advancements Advances in Two-Component Equipment Old New Injection (continuous) Dosing A runs continuously while B injects into A at higher pressure Allows for higher flow rates and shorter integration line Higher precision ratio accuracy • Alternating Dosing • A and B alternate back and forth at the same pressure • Okay for lower flow rates • Requires longer integration hose for proper mixing

  18. Advances in Two-Component Equipment • Data Reporting Advances • Standard on many systems • Confidence the job was done right • Diagnostic support USB Port

  19. Advances in Two-Component Equipment • Simplicity • Most manufacturers have out of box solutions to go from hot-potting to two-component systems • Focus on ease of operation and ratio assurance • Accessories • Accessories have evolved to handle higher pressures, temperatures and flow rates • Hoses, heaters, gun and manifolds

  20. Selecting Two-Component Equipment Items to consider: • Properties and type of material being sprayed • Epoxy, Urethane, Hybrid Urethane, etc. • Mix ratio, pot life, solvent content, viscosity • Recommended spray temperature and pressure • Production requirements • Tip size, number of guns, distance to substrate

  21. Selecting Two-Component Equipment More items to consider: • Material handling • Container size? 5-gal (20L) or 55-gal (200L) drums • Does the material need to be pre-heated or agitated? • Will it require a transfer pump from the container? • Fixed ratio or variable ratio? • Fixed – ideal when dedicated to one material • Variable – change ratios quickly or hit odd ratios • Safety requirements • Hazardous location approvals

  22. Selecting Two-Component Equipment More items to consider: • Frequency of use • Is this equipment for one job or many jobs? Rent or buy? • Is this a 24-7 operation? Is it a simple job that happens 1-2 times a month? • Ratio assurance • If off-ratio conditions exist, is auto shutdown important? • Am I required to verify that the coatings were applied properly and on ratio? • Am I required to provide a report? • Technical support • Will my crew ever need technical support?

  23. Basic Unheated System • Ideal for long pot life materials • No heat system • Lowest investment (about 2 times the price of a large airless rig) Gravity Feed B MIX S Proportioner Mix line A Note: Static mixer size and placement may change depending on application and proportioner type (pertains to all systems)

  24. Basic Heated System Gravity or pump feed • Good for heat-assisted spray • Shorter pump-to-substrate distances • Medium investment B Mix line MIX S Proportioner Fluid Heaters A Spray Gun

  25. Heated – Remote Manifold System • Ideal for material requiring heat to spray • Longer pump-to-substrate distances • Higher investment Gravity or pump feed B MIX S Dual Heated hose Mix line Proportioner Fluid Heaters Spray Gun Max length depends on pot-life Volume-balanced hoses A

  26. Heated Supply, Remote Manifold System Gravity or pump feed heated supply • Higher production heated applications • Longer pump-to-substrate distances • Higher investment B Dual Heated hose MIX Mix line Proportioner S Fluid Heaters Max length depends on pot-life A Spray Gun Volume-balanced hoses

  27. Mix-at-gun applications • Ideal for similar viscosity, fast setting materials • Short or long pump-to-substrate distances • Higher investment Gravity or pump feed heated supply B GUN Dual Heated hose S Proportioner Fluid Heaters Static mix or impingement gun A Volume-balanced hoses

  28. Who Benefits From 2-Component Equipment? • Owners • Improved productivity • Higher quality • Less material waste • Environment • Less material waste • No thinning required • Lower VOCs • Painters • Consistent pattern • Less fatigue • Spray at lower pressure • No hand-mixing required • Mechanics • Easier repair • No catalyzed material in pumps • Longer pump life • Coating Suppliers • Confidence in quality

  29. Case Study - Epoxy for Water Tanks • Producer of high quality water tanks • 5-gal kits are mixed by hand and sprayed with airless pump • Material: 2-part epoxy • Pot-life: 4-hrs at 75F • Results • Material savings • Day one resulted in 69% decrease of waste • Annual savings estimate was $15,000 • Improved quality • Improved mixing accuracy • Consistent and repeatable coating thickness • Lower spray pressure with less overspray • Reduced the number of coatings from two to one

  30. Benefits of Two-Component Equipment • Spraying materials accurately and on ratio results in: • Less rework – more even coating • Faster curing – heated coating • More even film builds, less sagging • Coating flows better on substrate • No surging or high spots • Ensures coating suppliers that their materials achieve the desired results

  31. Make more money! • Expand your business • Allows you to bid on projects that require advanced fast-curing materials • Reduce costs • Less paint waste - mix only what you need • Less solvent waste • Increased productivity • Finish jobs sooner, less cleanup at the end • Less downtime rebuilding and cleaning pumps • Reduced liability • Rework costs due to off-ratio mistakes

  32. Summary • In recent years, two-component equipment has evolved to meet the demands of advanced two-component coatings • The majority of protective coatings are two-component, yet the majority of equipment used to apply them is single component • Advances in two-component equipment technology: • Allow for simplified, reliable use of two-component sprayers • Provide confidence that two-part materials are applied accurately and on-ratio • Improve overall profitability

  33. Questions?

  34. Thank you!

More Related