1 / 31

The GTSTRUDL Base Plate Wizard

The GTSTRUDL Base Plate Wizard. A Module for the Modeling and Analysis of Base Plates. Rob Abernathy CASE Center GTSUG June, 2008 Las Vegas, NV. What is the Base Plate Wizard?. Create a Finite Element model of the base plate using SBHQ6 and SBHT6 elements.

cate
Download Presentation

The GTSTRUDL Base Plate Wizard

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The GTSTRUDL Base Plate Wizard A Module for the Modeling and Analysis of Base Plates Rob Abernathy CASE Center GTSUG June, 2008 Las Vegas, NV

  2. What is the Base Plate Wizard? • Create a Finite Element model of the base plate using SBHQ6 and SBHT6 elements. • Model attachments, anchors, stiffeners and bearing surface. • Adjust the model with constraints and cutouts. • Add loadings by input, DBX files or user-created files. GTSUG June, 2008

  3. What is the Base Plate Wizard? • Print or Print Preview • Save the base plate model in .gtbp format • Create a GTSTRUDL input file • Run the input file from the dialog, review the model and results in GTMenu. • Review results in the Wizard with data sheets GTSUG June, 2008

  4. Running the Base Plate Wizard • Will be available in GTSTRUDL 30 • Graphical GUI • Separate DLL • Separate password • ‘gtbp’ format files for model recovery and templates GTSUG June, 2008

  5. Wizard Organization Menu bar 10 tabbed pages + Additional dialogs Display area GTSUG June, 2008

  6. Tabs: Plate • Length units • Overall dimensions • Plate material properties GTSUG June, 2008

  7. Tabs: FE Mesh • Basic mesh size • Mesh adjustments GTSUG June, 2008

  8. Tabs: Attachments • Add attachments • Edit attachments: double-click a column • Delete attachments: right-click a column • ‘Mirrored’ option for angles GTSUG June, 2008

  9. Tabs: Attachments – Add Attachment • Select Table and Profile • Optional offset • Optional rotation in plane • Modeling method • ‘Edit Attachment’ uses same dialog GTSUG June, 2008

  10. Tab: Attachments – Supported Profiles • Drop-down Table and Profile menus are user controllable – add or remove • Standard shapes are Wide Flanges, Tubes, Channels, Tees, Angles, and Pipes • All AISC hot rolled standard shapes are supplied • Users can add their own standard shapes or “arbitrary” shapes – a collection of lines to represent built up shapes, etc. GTSUG June, 2008

  11. Tabs: Anchors • ‘Add Anchors’ to add anchors to the base plate. • Select existing anchors to edit or delete • Use ‘Edit Anchors’ to review full anchor data GTSUG June, 2008

  12. Tabs: Anchors – Add Anchors GTSUG June, 2008

  13. Tabs: Anchors - Location • Type in coordinates of anchors or use the Anchor Patterns button for automatic location calculation. GTSUG June, 2008

  14. Tabs: Anchors – Anchor Patterns • Choose a pattern • Enter offsets from plate edge • Enter the number of any anchors in between the corners GTSUG June, 2008

  15. Tabs: Anchors – Physical Properties • Physical Properties are not required for anchors specified with spring values. • The ‘Coupler’ option allows for two diameters for frame-type members • ‘By reference’ will allow you to select from a table of anchor properties. This table is user generated. GTSUG June, 2008

  16. Tabs: Anchors – Axial Stiffness • Anchor can be modeled as spring value or a frame member • Tension only option • Pretension is available for springs GTSUG June, 2008

  17. Tabs: Anchors – Shear Stiffness • ‘Fixed’ restrains in plane translation – no effect on out-of-plane displacement. • ‘None’ means no resistance to in plane translations. GTSUG June, 2008

  18. Tabs: Anchors – Allowable Values • Specified allowable values allow the BPW to check results for anchors GTSUG June, 2008

  19. Tabs: Bearing Surface • Choose spring constant type: 1st two use theory of elasticity formula. • Optional gap between the base plate and the bearing surface. GTSUG June, 2008

  20. Tabs: Stiffeners • No prototype available • Stiffeners are modeled as a single line • May be modeled as RIGID or FE extension • If extension, may have variable height • May be connected to an attachment. GTSUG June, 2008

  21. Tab: Constraints • Prototype still under development. • Constraints force nodes to lie on a line or a point with optional supports. • Add, (edit and delete) constraints. GTSUG June, 2008

  22. Tab: Constraints – Add Constraint • Point or line • Optional boundary conditions • Can be used to facilitate modeling issues outside of Base Plate Wizard. GTSUG June, 2008

  23. Tabs: Constraint – Edit Restraints • Select free or restraint type. • Fixed + or – modeled with TEN/COMP ONLY members with high axial strength. GTSUG June, 2008

  24. Tabs: Cutouts • Prototype still under development. • A cutout is a closed polygon that is excluded from the FE model. • Cutouts can be used to model skewed plates. GTSUG June, 2008

  25. Tabs: NL Springs • Can be pre-loaded like profiles • Enter name (GTS curve name) • Optional description • Can be assigned to anchors or constraints. GTSUG June, 2008

  26. Tabs: Loadings • Prototype still under development • Type in data or read from files – DBX (member forces or reactions) or .gtpb-style files you create. GTSUG June, 2008

  27. Display • Plate origin is red square in lower, left • Y axis is vertical, X is horizontal, Z comes out of the screen. • Scales on left and bottom • Current element and joint count at top GTSUG June, 2008

  28. Display • Attachment centroid is marked with a small cross in attachment color. This is the point where loads are applied to an attachment. • Anchor center is marked with small square – if a diameter is specified, a circle is drawn in anchor color. • Stiffeners are drawn as a line in the stiffener color. • Constraints are drawn as a line with each joint in the constraint marked with a small box in the constraint color. • Cutouts are outlined in the cutout color and no elements are displayed inside the cutout. GTSUG June, 2008

  29. Menu: File • Create a GTSTRUDL input file based on the current state • Read an existing .gtbp file • Create a .gtbp file • Print the current display • Launch the Scope Editor with the current display GTSUG June, 2008

  30. Menu: Results • If analysis and results are requested in the input file, results can be reviewed in the BPW • Data sheet style format • ‘Bearing surface’ uses the new LIST PRESSURE command output GTSUG June, 2008

  31. Current Wizard limits • 10 Attachments • 100 lines for each attachment • 1000 Anchors • 50 constraints • 1 line per constraint • 10 cutouts • 10 lines per cutout • 21 points in NLS curve • 1 bearing surface K value GTSUG June, 2008

More Related