1 / 62

Federal Aviation Administration

Federal Aviation Administration. Office of Commercial Space Transportation Experimental Permit Program. By: Sherman Council Date: 15 August 2011. Outline. Experimental Permit Process General Information Requirements to Obtain an Experimental Permit Safety Requirements

Download Presentation

Federal Aviation Administration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Federal Aviation Administration Office of Commercial Space Transportation Experimental Permit Program By: Sherman Council Date: 15 August 2011

  2. Outline • Experimental Permit Process • General Information • Requirements to Obtain an Experimental Permit • Safety Requirements • Terms and Conditions of the Experimental Permit

  3. Experimental Permit Process

  4. Process: Permit Review and Evaluation • Introductory Meetings • Initial communications with the potential applicant • Discussion is welcome in early phases of program • Pre-application Consultation • Encompasses discussions with prospective applicant prior to submittal of a permit application • Permit Application Submittal • AST determines when an application is complete enough • Permit Evaluation and Determination • AST has 120 days after receipt of a complete enough application to make determination • AST may toll an application

  5. Process: Evaluation Flow Policy Review Payload Review Permit Financial Responsibility Determination Application Submittal Environmental Review Safety Review

  6. Policy Review • To determine whether a proposed launch would jeopardize: • U.S. National Security • International Obligations • Foreign policy interests • Interagency review of launch proposal • Department of Defense • Department of State • NASA • FCC • Other

  7. Payload Review • Determine if a license applicant or payload owner or operator has obtained all required licenses, authorizations, and permits, unless the payload is exempt from review • Ensure payload does not jeopardize: • Public health and safety • Safety of property • U.S. National Security • Foreign policy interests • International obligations • Does not apply to payloads under the jurisdiction of any other government agency (e.g. FCC, NOAA, etc.) • Crew and passengers are not payloads

  8. Financial Responsibility Determination • Proof of financial responsibility required • Usually fulfilled by purchase of liability insurance • Value based on Maximum Probable Loss Determination • AST performs Maximum Probable Loss (MPL) Determination • Government property ($100M maximum) • The amount of insurance is based on a 1 in 100,000 chance of loss exceeding amount • 3rd party ($500M maximum) • The amount of insurance is based on a 1 in 10,000,000 chance of loss exceeding amount

  9. Environmental Review • Issuing a permit for a launch or the operation of a commercial launch sites constitutes a “Major Federal Action” and is therefore subject to National Environmental Protection Act (NEPA) • This process may take a significant amount of time, so its never too early to start

  10. Process: Experimental Permit Regulation – Part 437 National Environmental Policy Act (NEPA) Part 437: • Subpart A – General Information • Subpart B – Requirements to Obtain an Experimental Permit • Subpart C – Safety Requirements • Subpart D – Terms and Conditions of an Experimental Permit Part 413 Application Procedures Part 414 Safety Approval Part 440 Financial Responsibility Part 460 Human Spaceflight

  11. General Information

  12. Eligibility • Experimental permits issued only for: • Research and development to test new: • Design concepts • Equipment • Operating techniques • Showing compliance with requirements for obtaining a license • Crew training before obtaining a license for a launch or reentry

  13. Scope • Experimental Permit authorizes: • Launch of reusable suborbital rocket • Reentry of reusable suborbital rocket • Authorization includes • Pre-flight operations • Post flight operations NOTE: The Permit authorization applies to reusable suborbital rocket operations ONLY.

  14. Scope (continued) • Pre-flight operation includes each operation that • Takes place at a U.S. launch site • Meets specific criteria • Closely proximate in time to flight • Entails critical steps before flight • Unique to space launch, and • Hazardous enough to warrant regulatory oversight • Post flight operations • Includes each operation necessary to return vehicle to safe condition after landing or impact

  15. Requirements to Obtain an Experimental Permit

  16. General Requirements • Applicant must provide • Program description • Flight test plan • Operational safety documentation • Other regulations apply • Environmental • Financial responsibility (part 440) • Human spaceflight (part 460)

  17. General Requirements • Inspection before issuing permit • Applicant must make each vehicle planned to be flown available to FAA for inspection • Verify vehicle built as represented in application • Occurs before FAA issues permit NOTE: No vehicle maintenance or certification requirements exist at this time.

  18. Program Description • Applicant must provide • 3D drawings or photos of vehicle • Gross liftoff weight • Thrust profile

  19. Program Description (continued) • Applicant must describe • All reusable suborbital rocket systems • Structural • Flight control • Thermal • Pneumatic • Hydraulic • Propulsion • Electrical • Environmental control • Software and computing systems • Avionics • Guidance

  20. Program Description (continued) • Applicant must describe • Types and quantities of all propellants • Types and quantities of any hazardous materials • Purpose for which vehicle is to be flown • Each payload or payload class planned • Identify any foreign ownership • For sole proprietorship • For a corporation, any foreign ownership of 10% or more • For joint venture, association, or other entity

  21. Flight Test Plan • Describe flight test program • Estimated # of flights • Key flight safety events

  22. Max Height Longitudinal Boundary Operating Area Latitudinal Boundary Flight Test Plan (continued) • Identify/describe geographic coordinates of the boundaries of one or more proposed operating areas • Must provide the planned maximum altitude

  23. Operational Safety Documentation • Pre-flight and post flight operations • Operator must demonstrate how it will meet requirements to: • Establish a safety clear zone • Verify public is outside the safety clear zone before/during any hazardous operations • Hazard analysis • Operator must perform all steps required by the regulation • Provide all results of each step to FAA • Verification • Applicant must identify, describe, and provide verification evidence of the methods and systems used to contain vehicle’s IIP within operating area and outside any exclusion area

  24. Operational Safety Documentation(continued) • Landing and Impact • Demonstrate compliance for each location for: • a nominal landing of vehicle • a contingency abort landing of vehicle • any nominal or contingency impact or landing of a component • Agreements • Must enter into other agreements and provide copy to FAA • Identify and describe each tracking method or system used • Provide • Flight rules • Mishap response plan

  25. Safety Requirements

  26. Rest Rules • Rest rules for vehicle safety operations personnel • No personnel may work more than • 12 consecutive hours • 60 hours in the 7 days preceding permitted activity, or • 14 consecutive work days • Personnel must receive • At least 8 hours of rest after 12 hours of work • Minimum 48-hour rest period after 5 consecutive days of 12-hour shifts

  27. Pre-Flight and Post Flight Operations • Must protect public from adverse effects of hazardous operations and systems • Preparing vehicle for flight at a launch site in U.S. • Returning vehicle and any support equipment to safe condition • Establish safety clear zone to contain adverse effects of each operation involving a hazard • Verify the public is outside the safety clear zone • Before hazardous operations • During hazardous operations

  28. Hazard Analysis • Permittee must • Identify and characterize each of the hazards • Assess the risk • Carry out the risk elimination and mitigation measures derived from its hazard analysis • Ensure the continued accuracy and validity of its hazard analysis

  29. Experimental Permit Hazard Analysis - Qualitative Severity Classifications

  30. Experimental Permit Hazard Analysis - Qualitative Likelihood Classifications Consistent with FAA AC 23.1309, Class I aircraft (highest acceptable aircraft risk)

  31. Experimental Permit Hazard Analysis - Risk Acceptability High (1-9):Unacceptable - Controlling/mitigating actions should be taken to reduce risk Low (10-20): Risk is acceptable

  32. Experimental Permit Hazard Analysis - Example

  33. Hazard Analysis (continued) • Hazard analysis must • Demonstrate that the risk elimination and mitigation measures achieve the risk levels through validation and verification • Verification includes • Test data • Inspection results, or • Analysis

  34. Operating Area Containment • Operating area • Must contain the vehicle’s instantaneous impact point (IIP) • Must be large enough to contain each planned trajectory and all expected vehicle dispersions

  35. Operating Area Containment (continued) • Operating area • Must contain enough unpopulated or sparsely populated area to perform key flight safety events • May not contain or be adjacent to a densely populated area or large concentrations of members of the public • May not contain or be adjacent to significant • Automobile traffic • Railway traffic • Waterborne vessel traffic

  36. Nuclear Power Plants Hospitals Sport Stadiums Operating Area Containment (continued) • FAA may prohibit IIP from traversing certain areas within an operating area • Designating one or more areas as exclusion areas • Exclusion area may be confined to a specific phase of flight Examples of possible Exclusion Areas

  37. Key Flight-Safety Event Limitations • Permittee must conduct any key flight-safety event so that the IIP, including expected dispersion, is over an unpopulated or sparsely populated area • Key flight-safety events include: • Ignition of any primary rocket engine; • Any staging event, or • Any envelope expansion • Permittee must conduct flight so that reentry impact point does not loiter over a populated area

  38. Landing and Impact Locations • For nominal or any contingency abort landing of vehicle, or for any nominal or contingency impact or landing of a component, a permittee must use a location that: • Is big enough to contain impact, including debris dispersion; and • At time of landing, does not contain any members of the public

  39. Agreements with Other Entities • Must have an agreement in writing with: • Federal launch range operator • Licensed launch site operator • Any other party that provides access to or use of property and services required to support safe launch/reentry

  40. Agreements with Other Entities (continued) • Must have an agreement in writing with: • US Coast Guard district • For overflight of navigable water • For issuing a notice to mariners before flight • Responsible Air Traffic Control authority • For airspace through which flight/reentry will occur • For measures necessary to ensure safety of aircraft

  41. Collision Avoidance • Must obtain collision avoidance analysis: • From USSTRATCOM • For planned maximum altitudes greater than 150 km • Analysis must establish each period during which permittee may not initiate flight • Ensure vehicle and jettisoned components do not pass closer than 200 km to manned or mannable orbital object • Distance less than 200 km may be used if distance provides an equivalent level of safety, and distance accounts for all uncertainties in analysis

  42. Tracking • Permittee must: • During flight, measure in real time the position and velocity of its reusable suborbital rocket; and • Provide position and velocity data to FAA for post-flight use

  43. Communications • Must be in communication with Air Traffic Control during all phases of flight • Must record communication affecting the safety of the flight

  44. Flight Rules • Must confirm that all systems and operations necessary to ensure that safety measures derived are within acceptable limits • Must (during all phases of flight) • Follow flight rules that ensure compliance • Abort flight if it would endanger the public • May not operate vehicle in a careless or reckless manner that would endanger any member of the public during any phase of flight

  45. Flight Rules (continued) • May not operate vehicle in areas designated in a NOTAM unless authorized • Air Traffic Control, or • A Flight Standards Certificate of Waiver or Authorization • Comply with provisions of part 91 • For any phase of flight • Where rocket operated like an aircraft in the NAS

  46. Anomaly Recording • Permittee must: • Record each anomaly that affects a safety-critical system, subsystem, process, facility, or support equipment • Identify all root causes of each anomaly • Implement all corrective actions for each anomaly • Report to FAA any anomaly of any system that is necessary for complying with requirements • Report to FAA the corrective action for each anomaly • Implement each corrective action before the next flight

  47. Mishap Reporting • Permittee must report, respond to, and investigate mishaps that occur during permitted activities • Reporting requirements • Immediately notify FAA WOCC if there is a launch or reentry accident or incident or a mishap that involves a fatality or serious injury • Notify within 24 hours FAA/AST if there is a mishap that does not involve a fatality or serious injury • Submit within 5 days of the event a written preliminary report to FAA/AST if there is a launch or reentry accident or incident during permitted flight

  48. Terms and Conditions of the Experimental Permit

  49. Public Safety Responsibility • Permittee must ensure any launch or reentry under an experimental permit is safe, and must protect public health and safety and the safety of property

  50. Allowable Design Changes • FAA identifies type of changes a permittee can make to the vehicle design without invalidating the permit • Permittee must ask FAA to modify permit if: • It proposes to conduct permitted activities in manner not authorized by permit • Any representation in permit application that is material to public health and safety or safety of property is no longer accurate or complete NOTE: The type of changes allowable, without invalidating the permit, will be explicitly identified in the Terms and Conditions of the Experimental Permit

More Related